Certain B/R and E/M repair works at MPH, CPH Station, MT Area and other locations under GE (Utilities) Udhampur

Amount

Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engineer-in-charge.

Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

Walling of random rubble stone masonry uncoursed with best quality lacally available harder stones such as granite, trap, basalt stone etc, wellbonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-charge.

Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, windows, ventilators, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing, complete all as specified and directed by Engineer-in-charge.

Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-250) quality-A, steel work duly painted with one shop coat of zinc chromate primer incl preparation of surfaces, complete all as specified and directed by Engineer-in-charge.

Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engineer-in-charge.

Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work duly painted with one shop coat of zinc chromate primer including preparation of surfaces, complete all as specified and directed by Engineer-in-charge.

S&F hard drawn steel wire fabric not exceeding 4.00kg per sqm cut to length, bent to shape required and welding with MS angle iron frame, complete all as specified and directed by Engr-in-Charge.

Removal of existing old water proofing treatment as in roofs and Preparing RCC roof slab top by wire brushing and cleaning the dust and foreign materail etc , there after applying 15mm thick cement plaster on concrete surface in CM 1:4 finished even and smooth without using extra cement using water proofing compound, complete all as specified and directed by Engr-in-Charge.

Preparing and Cleaning the dust and foreign materail etc complete for roof surfaces (plaster/concrete) and applying bituminous primer on roof surfaces @ 3.50 Kg /Sqm and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing not less than 3.5 kg/Sqm and reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on bituminous surface by press application method with 75mm side overlap and 150mm end overlap. The membrane has to be laid with LPG torch application and overlaps sealed and finished neat and blinded with premier dry sand @ 0.5 kg/Sqm dusted over bitumen coat, incl.applying two coats of aluminium paint over roof treatement, complete all as specified and directed by Engineer-in-charge.

Supply only integral water proofing compound of approved quality, complete all as specified and directed by Engr-in-charge.

Dismantling Asbestos cement (corrugated,semicorrugated, etc) sheets in roof coverings, complete all as specified and directed by Engineer-in-charge.

M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. Notes for item No 11 to 16:- The work shall have to carry out height upto 15mtr high and the contractor shall have no claim of the height and including scaffolding, ladder and for necessary safety arrangement for complete the work.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, and removing from site including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in-charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and directed by Engineer-in-charge.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-charge.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-charge.

2nd class hard wood (Sal / Hollock) factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick fitted to chowkats, complete all as specified and directed by Engineer-in-charge.

S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc, complete all as specified and directed by Engineer-in-charge.

M&L for providing cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast, complete all as specified and directed by Engineer-in-charge.

S&F steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer, complete all as specified and directed by Engineer-in-charge. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 . ii) MS fillets, glazing wire gauge shall be measured and paid seprately.

Description all as per item as above here in before but without glazing bar, complete all as specified and directed by Engineer-in-charge. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 sheet 1/3 to 3/3. ii) MS fillets, glazing, wire gauge shall be measured and paid seprately.

S&F factory made mild steel ventilators box type with upper top hung shutter and bottom fixed type shutters including pintol hinges and ,steel peg stay and one shop coat of red oxide primer, complete all as specified and directed by Engineer-in-charge.

S&F in repairs powder coated aluminium sections of various sizes required of sliding or fixed type for frame and shutters of doors, windows, ventilators and partition with one or more rebates etc.including necessary joining cleats, glazing clips, beading,rubber packing, screws and all other fittings like locking arrangement for shutters, handles, tower bolts hinges etc. complete all as specified and directed by Engineer-in-charge. Note :- (i) Glazing and aluminium wire mesh shall be measured and paid separately. (ii) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight.

M&L for 4.80 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads, in square in exe 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-charge.

S&F 4 mm thick sheet glass ordinary quality, and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 4 mm thick sheet glass ordinary quality, and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-charge.

S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engineer-in-charge.

Aluminium, anodised, barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed by Engineer-in-charge.

Aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and directed by Engineer-in-charge.

S&F100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed by Engineer-in-charge.

Plain cement concrete, (Nominal mix), type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cills, coping, apex stone, bed plates and lintel upto 1.6m clear span etc including weathering slightly rounded or chamfered angles and throating as directed including necessary form work, complete all as specified and directed by Engineer-in-charge.

S&F stainless steel grating doom 100mm dia with or without hole, complete all as specified and directed by Engineer-in-charge.

Desilting the drains of any size, shape and depth including pumping out liquid waste, diverting the flow in drains if required and cleaning the drain as directed and also incuding taking all safety measures and removing the material obtained from drains outside MD land, complete all as specified and directed by Engineer-in-charge. Note: (i) The drain shall be desilting/ cleaning by manual and the contractor shall visit the site before quoting the contract (ii) The desiliting/ cleanable material may be loose soil, mud, clay or soil waste. (iii) The depth of the drain may very upto 3.00m with limited working space. (iv) The place of disposal shall be find out by the contractor.

Plain cement concrete, (Nominal Mix), type D-2, 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as specified and directed by Engineer-in-charge.

M&L for PCC 1:3:6 type B1 (using 20 mm graded aggregate) in surafce channel and drains, complete all as specified and directed by Engineer-in-charge.

M&L for extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, incl forms moulds, mitered/stopped ends etc, complete all as specified and directed by Engineer-in-charge.

M & L for 50mm thick Plain Cement Concrete 1:3:6, type C-2 (using 20mm graded crushed stone aggregate), finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster, any description, on brick or stone walls, etc. including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer-in-charge.

Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) as on walls, complete all as specified and directed by Engineer-in-charge.

Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls, complete all as specified and directed by Engineer-in-charge.

Removing existing paint by scrapping with TruCare Wall Sander L-01/H-01 (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour, complete all as specified and directed by Engineer-in-charge.

Providing and applying 1mm thick waterproof cement based putty @ 1Kg (undiluted) per Sqm of Asian Paints or its equivalent over the newly plastered untreated surfaces/ old painted wall surfaces after scrapping to prepare the surface even and smooth, complete all as specified and directed by Engineer-in-charge.

Sanding of the putty surface with Asian Paints TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour, complete all as specified and directed by Engineer-in-charge.

Providing and applying, one coat of acrylic waterbased interior/exterior grade primer @ 0.8 itr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent as recommended by the manufacturer and approved by GE, having an electric motor of min 1 HP with a flow speed of min 1 itr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed by Engineer-in-charge.

Providing and applying two coats of smooth acrylic emulsion with rich matt finish having voc less than 50 grams per Itr complying leed criteria @ 1 Itrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming ccat with fully automatic airless spray machine of paint application of Asian Pairts Trucare Graco or equivalent as recommended by the manufacturer and approved by the GE, having an electric motor of min 1 HP with a flow speed of min 1 Itr per minute having a pressure of 3300 PSI A low 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and directed by Engineer-in-charge. Make: "Apex Ultima" of Asian Paint/"Weathercoat All Guard" of Berger Paints/Excel Total of Nerolac Paint

Note: (Applicable to Sri items No. 45 to 49) (i) At the time of uploading bids each tenderer shall upload a copy of MOU towards triparty agreement between tenderer. Manufacturer of Paints from Asian Paints/Berger Paints/Goodlass Nerolac Paints and their Applicators, for materia and execution of work from any of the said manufacturers. Financial Bids of only those bidders shall be admitted whosoever shall upload a legitimate MOU. 2. Terms of the MOU so entered between tenderes, Applicators and Manufacturers mentioned above shall also cover the guarantee from manufacturer of paints for any defec: in work executed by their applicator for a period of 3 Years. All other aspects with regard to payment, execution of work or other legal points shall be solely as decided between the tenderer, Paint manufacturer & Applicator. Department shall in no way be responsible for any complicacy arising at a later stage between the parties to MOU with regard to payments or execution of work. 3. (Applicable to Srl items other than covered under Note 1 to 5 here-in-before). The plaster work shall have to carry out height upto 15mtr high and in paches. The contractor shall have no claim of the height and including scaffolding, ladder and for necessary safety arrangement etc. for complete the work. (ii) The work shall be executed in restricted area and head loss etc. The contractors are advised to consider this aspect while quoting his rates. Nothing whatsoever on this account shall be admissible at later stage.

M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered or old surfaces over a coat of white primer, complete all as specified and directed by Engineer-in-charge.

Complete removing existing treatment using grinding machine/ Mechanical means (as per instructions)on walls including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces, complete all as specified and directed by Engineer-in-charge.

M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engineer-in-charge.

M & L two coat of Apex Paint over a coat of alkali resistant priming paint over old/ newly plastered surfaces of wall including preparing surfaces after complete removal of existing treatment, complete all as specified and directed by Engineer-in-charge. Notes for item No 51 to 54:- The plaster work shall have to carry out upto any height and in paches. The contractor shall have no claim of the height and including scaffolding, ladder and for necessary safety arrangement etc. for complete the work.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-charge.

Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engineer-in-charge.

M&L Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 20mm thick screed bed in CM(1:6), complete all as specified and directed by Engineer-in-charge.

All as per item No 57.00 here-in-before but in riser of steps, skirting, dado and pillar etc including 10mm thick backing coat in CM 1:4, complete all as specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, remov-ing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.

Non skid ceramic coloured tiles 400mm X 400mm X 7 to 8 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in cement plaster 1:4, complete all as specified and directed by Engineer-in-charge.

Glazed ceramic coloured tiles 600mm x 300mm x 8 to 10mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engineer-in-charge.

E/M PORTION Taking down carefully alu./copper point wiring ,light fan socket, or power complete with fittings such as switches ceiling rose;holders; regulators, socket etc removing material to store for keeping in safe custody for reuse or disposal by credit and marking good to disturbed surfaces of walls floors etc, complete all as specified and directed by Engineer-in-charge.

M & L for concealed point wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC concealed conduit for fixing of switches, sockets,light, fan regulators etc for the following, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, Polycab, KEI, Grandley

One light/fan/bell point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One socket outlet 5 Pin, 5 Amps, SP on same board.

One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size .

One light point point controlled by two 2-way switches with cables 1.5 sqmm size.

M & L for wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables in PVC casing caping of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm for fixing of switches, sockets,light, fan regulators etc for the following, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, Polycab, KEI, Grandley

One light/fan/ /bell point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One socket outlet 5 Pin, 5 Amps, SP on same board.

One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size .

S&F Piano type switch one way 6 Amps , 240 Volt, complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F Bell push,flush type, one way 6 Amps , 240 Volt, complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F Switch Piano type single pole 15Amps one way 240 Volt, complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F Switch 6 amp, 2 way, 240 Volt , complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F socket outlet 2 in 1,3/5 pin piano type 5 Amp flush type, complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F socket out let 6 /16 Amps 6 pin flush type, complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked, complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F Lamp holde PVC type with back plate suitable for batten fittings, complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F of electronic step type regulator of capacity 240 volts flush type ISI marked, complete all as specified and directed by Engineer-in-charge.

S& F Bell, AC, 230 volts, single pole, complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Havells/ABB/Anchar

S&F in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, Polycab, Philips, Gold Medal

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, Polycab, Philips, Gold Medal

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, Polycab, Philips, Gold Medal

S&F in replacement LED light fitting 1 x 9 W/ 1 x 10 W Bulk head luminaires complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, Polycab, Philips, Gold Medal

S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 4.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, Polycab, Philips, KEI

S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, Polycab, Philips, KEI

M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1), complete all as specified and directed by Engineer-in-charge.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces, complete all as specified and directed by Engineer-in-charge.

S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces, complete all as specified and directed by Engineer-in-charge.

S&F Sheet metal enclosure factory made for DBs Triple pole and neutral single door 415 volts 12 way ,suitable for MCCBs and fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces, complete all as specified and directed by Engineer-in-charge.

S&F MCG double pole, 240 Volts , 50 Hz 10 Ka, 40 Amps, 30mA, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, HPL, Legrand

S&F MCB single pole and neutral, 240 Volts , 50 Hz 10 Ka, 40 to Amps, 30mA, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, HPL, INDO ASIAN

S&F MCB single pole 240 Volts , 6 to 20 Amps, complete all as specified and directed by Engineer-in-charge. Make :- Havelles, HPL, Legrand

Taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm, complete all as specified and directed by Engineer-in-charge.

All as per Ser item No 88.00 here in before but for exhaust of any size/make, complete all as specified and directed by Engineer-in-charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 2 core in service connections, complete all as specified and directed by Engineer-in-charge.

All as per Ser item No 90.00 here in before but for 10 sqmm 2 core, complete all as specified and directed by Engineer-in-charge.

All as per Ser item No 90.00 here in before but for 16 sqmm 2 core, complete all as specified and directed by Engineer-in-charge.

S& F Ceiling Fan, 230 volts, single phase, 1200mm sweep, 5 Star with all accessories completed including taking down existing unserviceable ceiling fan of any description and size, complete all as specified and directed by Engineer-in-charge. Make :- Havells/CG/Usha/Bajaj

S& F in repair PVC Rectangular block for switches,socket, fan regulator, 3 mm thick plastic laminated sheet cover of size 100mm x 100 mm and 50 mm deep, complete all as specified and directed by Engineer-in-charge.

Checking,servicing, oiling and greasing of fan of any size/type by using appropriate grade of oil /grease and replacing defective parts such as bush, bearing, split pin, rubber bush, hanging clamp and capacitor etc including cleaning, complete all as specified and directed by Engineer-in-charge. (Note:-Parts/components will be measured and paid seperately under their respective items)

Rewinding of celling fan 1200/1400mm sweep, AC, 230 volts single phase with super enamelled copper winding wire of appropriate size including packing, insulating material, soldering, varnishing, reassembling and testing as required, making functional, complete all as specified and directed by Engineer-in-charge.

Nuts, bolts and washers of appropriate size for hanging of celling fan, complete all as specified and directed by Engineer-in-charge.

Top / botton canopy of required size with tightening screws, complete all as specified and directed by Engineer-in-charge.

Bearing of celling fans for 1200/1400mm sweep suitable for different makes /type of fans, complete all as specified and directed by Engineer-in-charge.

Ball bearing suitable for exhaust fan 300mm to 600 mm sweep of different make, complete all as specified and directed by Engineer-in-charge.

Split pins of galvanished iron 1/8" dia, 2" length, complete all as specified and directed by Engineer-in-charge.

Rewinding of exhaust fan 300mm sweep AC 230 volts single phase with super enameled copper wire of appropriate size including packing insulating material, soldering, varnishing , reassembling , testing and making functional, complete all as specified and directed by Engineer-in-charge.

All as per Ser item No 102.00 here in before but for 450 mm to 600 mm sweep, complete all as specified and directed by Engineer-in-charge.

Condenser/capacitor suitable for 230 volts singls phase celling fan 1200mm/1400 sweep of approved make and quilty of capacity 2.5 MFD, complete all as specified and directed by Engineer-in-charge.

All as per Ser item No 104.00 here in before but for 3.15 MFD, complete all as specified and directed by Engineer-in-charge.

All as per Ser item No 104.00 here in before but 4 MFD for Exhaust Fan, complete all as specified and directed by Engineer-in-charge.

All as per Ser item No 104.00 here in before but 6 MFD for Exhaust Fan, complete all as specified and directed by Engineer-in-charge.

S&F wireless,waterproof door bell for office at over 120 meter range operating, complete all as specified and directed by Engineer-in-charge. Make :- Anchor

S&F LED Lamp 9 Watt suitable for lamp holder, complete all as specified and directed by Engineer-in-charge. Make :- Havells,HPL,Philips

S&F in repair decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base, complete all as specified and directed by Engineer-in-charge. Make :- Havells,HPL,Philips

S&F in repair slim surface mounted 12 watt LED panel with premium diffuser to ensure glare free & even light distribution, complete all as specified and directed by Engineer-in-charge. Make :- Havells, CG, Usha, Bajaj

S&F Exhaust Fan, made of sturday engineering Plastic complete with louvers shutter, 230 volts, single phase, size 300mm sweep with blade and frame heavy duty with all accessories complete including taking down existing unserviceable ceiling fan of any description and size, complete all as specified and directed by Engineer-in-charge. Make :- Havells, CG, Usha, Bajaj

S&F Exhaust Fan, steel body, 230 volts, single phase, size 450mm sweep with blade and frame heavy duty with all accessories complete including taking down existing unserviceable ceiling fan of any description and size, complete all as specified and directed by Engineer-in-charge. Make :- Havells, CG, Usha, Bajaj

Supply and Fix electric water heater, storage type steel body with copper inteer tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate NRV, Connection piece etc, complete all as specified and directed by Engineer-in-charge. Make :- Bajaj, Philips

RAMAN CONSTRUCTION CO (BID ID -3185454)

RAJ MOHD (BID ID -3185771)

ATUL TRADING CO (BID ID -3185734)