REPAIR/MAINTENANCE OF STREET LIGHTS AND CONNECTED WORKS AT ITARANA CANTT UNDER GE ALWAR

Amount

Disconnecting and taking down the street light fitting from the pole and repair of street light fitting of any type, capacity & make by replacement of unserviceable spare parts & making the fitting functional and refixing after repairs all as specified and directed.

Disconnecting and taking down High Mast light from the steel tower and repair of High Mast fitting of any type, capacity & make by replacement of spare parts & making the fitting functional and refixing after repairs all as specified and directed. Note for item No. 1.00 & 2.00 : Spare parts / accessories required to be replace shall be measured and paid seperately as "supply only" under the relevent items.

Supply only surge protection device (SPD) for LED street light fitting 45-60 watt. Make : Bajaj/Philips/Shakti/CG/Polycab

Supply only BIS registered potted driver suitable for LED street light fitting 45-60 watt. Make : Bajaj/ Philips /Shakti /CG/Polycab

Supply only surge protection device (SPD) for LED street light fitting 72-90 watt. Make : Bajaj/Philips/Shakti/CG.

Supply only BIS registered potted driver suitable for LED street light fitting 72/90 watt. Make : Bajaj/ Philips /Shakti /CG/Polycab

Supply only surge protection device (SPD) for LED street light fitting 100-150 watt. Make : Bajaj/Philips/Shakti/CG/Polycab

Supply only BIS registered potted electronic driver suitable for LED street light fitting 100-150 watt. Make : Bajaj/Philips/Shakti/CG/Polycab.

S&F in repair 2.5 Sqmm, PVC insulated round sheathed, twin core aluminium conductor (flexible) industrial cable, 1100 Volts, conforming to IS: 694 from street light feeder/junction box to street light fittings.

S&F in repair 2.5 Sqmm PVC insulated & FRLS PVC round sheathed, twin core copper conductor (flexible) industrial cable from street light feeder / junction box to street light fittings.

S&F in repair 6 sqmm PVC insulated & sheathed single core copper conductor cable repair for street light feeder panel /junction box/rewiring fitting fixtures etc.

M&L rigid steel conduit, welded of 20mm dia for protection of wire fixing on pole as required with 2 Nos clamps complete all as specified and directed.

S&F street light bracket made to shape at required angle made out of 40/50mm dia (light grade) GI tubing of length not less than 1.5m long suitable for fixing /holding street light fittings including mild steel flate iron 50mm x 6mm clamp 02 Nos with bolts, nuts and washer complete all as specified & directed.

S&F in repair decorative gate light made up of high grade unbreakable (MUSHROOM PRISMATIC) polycarbonate material including 10W LED Lamp B22 base including taking down of old unsv light. Make : Havells/Crompton/Bajaj.

S&F in repair pole mounted juction box made out of one piece moulded SMC IP 65 protection having aluminium bus bars 100 Amp three phase and neutral with one No MCB SP 6 Amp for street light, cable entry from bottom, maintenance free size 300mm x 200mm x 100mm fixing on pole with MS flat 25mm x 3mm clamp including nut bolts front openable all as specified and directed.

Supply, installation, commissioning and testing of Lithium based energy integrated solar street light 40Watt in single FRP body encases solar panel 44/46Wp monocrystalline, Lithium battery 11.1/12.8V, 42AH with inbuilt BMS, High brightness W-LED (160-180 lm/watt) lamp, CRI>0, Colour temperature 6500K, micro controller based charge controller cum driver, automatic dimming function with PIR motion senor, Dusk to down operation, working temperature: (-) 10C to (+) 55C, weight 10-12kg with adjustable MS clamp suitable for pole/ wall mounting, protaction, short circuit, overload, reverse polarity and battery protections with and including dismantling existing assemblies complete all as specified. Note :- (i) Firm should produce vital parameters test report from NABL accredited lab and should be of made in India with CE & ROHS certified. (ii) Firm should give warranty for the complete fitting including all electric / electronics connected parts for minimum 5 years. (iii) The complete documents regarding warranty shall be handed over to GE at the time of execution of the items in turn. Contractor may obtain warranty/extended warranty from the manufacturer for above period. Make : Philips /Havells /Axon.

Repairs to street light panels by replacement of unserviceable electric items such as timer, contactor, MCB, MCCB, busbar etc wiring of suitable size copper conductor cable single core etc and setting of timer including dismantling of unserviceable parts. Note : Spare parts measured and paid seperately under the relevent item as "Supply only".

Supply only MCB SP 6 to 32 Amps, 230 Volts, AC complete. Make : Havells/HPL/C&S.

Supply only electric contactor 3 pole suitable for 40 Amps 240 Volts AC complete. Make : L&T, Siemens/C&S/Havells.

Supply only electronic digital crono timer 240 volts, 50 Hz complete. Make : L&T, Siemens/C&S/Havells.

M&L painting of APFC/LT/SL panel board of any sizes with one coats of synthetic enamel paint smoke grey including preperation of old painted surfaces by scrapping of old surface and making good surface all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m deep below normal ground level and connected to and including galvanized iron earth wire 4mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/test point/ panel/equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus soil to a distance not exc 50m, charcoal and salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm bore for watering and 15mm bore 3m long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided to CI frame including taking out old u/s earthing etc complete all as specified & as directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

All as per serial item No 25.00 here-in-before but of cross sectional area 10 sqmm 2 core.

Excavation in trenches n.exc 1.5Mtr wide, n.exc 1.5Mtr in depth for laying of cables & foundation of poles, stay assembly and getting cut in any type of soil.

M&L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note :- Thickness after punning shall be considered for payment.

M&L brick work with fly ash bricks (As Per IS-13757(1993) burnt clay fly ash building bricks), (old size bricks) (duly marked HT cable) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10mm over UG cable for protection and complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in any type soil.

Removing of surplus excavated soil to a distance not exc. 50m and depositing where directed at a level not exc 1.5 Mtr above the starting point.

Boring of holes under road, pavement, hard standing by trench less technology using ultra sound technique and necessary machine including HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure.

M&L galvanized iron tubing, 40mm bore light grade, ISI marked, incl all fittings and laid in trenches/under road/drains or fixed to poles/walls with required size of flat iron (25mm x 3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete all as specified and directed.

S&F in repair LED street light fitting 50watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete. Make : Havells/ HPL/ Bajaj/Shakti.

All as per item No 34.00 here-in-before but of cap100 Watt.

S&F in repair LED flood light 100 Watt 230 volt AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistant complete with driver and lamp. Make : Havells/Shakti/Bajaj/HPL.

All as per item No 36.00 here-in-before but of cap 150 Watt.

S&F in repair post top lantern LED type 20 watt 230V AC outdoor type with decorative post top for 360 degree indirect light IP-65 protection with impact and corrosion resistant complete with driver and lamp complete. Make : Havells/Shakti/Bajaj/HPL.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this schedule complete all as specified.

M&L PCC (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in coping/pedestal of poles including providing necessary form work for fair finished exposed concrete surfaces complete all as specified and as directed.

M&L PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundation of stay assembly & poles and similar works complete all as specified. Note :- Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment.

M&L flexible steel conduit 25mm dia for protection of wire fixing on pole as required complete all as specified and directed.

S&F distribution board, sheet metal enclosure single door 240 volts, AC, factory made, fixed on pole with necessary welding work, suitable for mounting Isolators/MCBs with bus bars, two ways including taking down unserviceable distribution board and making good with black painting in two coat to the disturbed poles.

Shiv Enterprises

Hitesh Construction

GAR CONSTRUCTIONS

shiva construction

M/s ASK Enterprises

VISHAL ENGINEERING COMPANY

M/s S Amarjit Singh

M/S GAURI CONSTRUCTION