PROVISON OF TENSILE SHELTERS AT AFS YELAHANKA

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, footing, foundation for poles etc., and getting out in hard/dense soil complete all as directed.

M & L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finished concrete flat complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions and finished rough surfaces of concrete flat complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix using 20mm graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete M-25 design mix (using 20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M & L for 16 to 20 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 22.50cm and not exceeding 30 cm long complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM complete all as specified and directed.

Removing of excavated surplus soil not exceeding 50m and depositing where as directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

S&F mild steel work in tubular/square/rectangular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of anti-rusted special quality paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for tensile fabric of 900 g/Sqm anti moulded double side UV protected glossy finish and tensile breaking strength of warp and weft 3000N / 5CM and tear strength of warp and wept 500 N, adhesion as per manufacture instruction and edges are fitted with aluminium strip of size 25 mm wide, 3 mm thick complete all as specified and directed

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 flat, size 250 mm x 150mm x 40mm complete all as specified and as directed.

Supply and laying in trenches, LT underground cable, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 10 Sqmm, 4 core multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and directed

S&F in repair pole mounted junction box (Street light box) sliding type doors fits to base by 3 phase busbar insulators - 04 Nos for street lighting system with nuts and bolts with fixing arrangement outdoor type of dimension 240 x 130 x 95 mm for with suitable screen-printed skull and bones for danger notice on middle and top cover of the box complete all as directed by Eng-in-Charge. Make : Sintex or equivalent

Supply and fixing of LED Bollard light of capacity 13W, 220V, warm white complete with nut bolts and washer including 3 core cables of 1.5 sqmm from light to junction box complete all as specified and directed. Make : Polycab Model No PGR0301003 or equivalent in Crompton/ Havells / Philips

M&L for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC capping and casing with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and sheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed.

All as per item No 20 above but for One socket outlet three pin, 5 Amps on the same board.

All as per item No 20 above but for One socket outlet three pin, 5 Amps, independent.

M&L for point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC casing and capping with fittings ISI marked, terminated in junction box incl 4 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps complete all as specified and directed.

Supply and fix Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed.

Supply and fix Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed.

Supply and fix Modular metal flush terminal boxes with lumina plate and frame suitable for 8 modules complete all as specified and directed.

Supply and fix Switch modular type single pole one module, 6 Amps complete all as specified and directed.

Supply and fix Switch modular type single pole one module, 16 Amps complete all as specified and directed.

Supply and fix Socket outlet modular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as specified and directed.

Supply and fix Socket outlet modular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as specified and directed.

Supply and fix MCB DB, horizontal single-phase consumer unit with provision for incoming 2 pole (MCB / Isolator / RCD) and single-phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way including taking down existing complete all as specified and directed.

Supply and fix in replacement MCB SPN, 'B' series. 10 KA, 240 Volts 40 Amps capacity complete all as specified and directed.

Supply and fix in replacement MCB SP, 'B' series. 10 KA, 240 Volts, 6-32 Amps capacity complete all as specified and directed.

Supply and fix sheet metal enclosure Two way , two module ,IP30 degree protection enclosure for 32 Amp MCB DP complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick buried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and including GI earth lead wire 4mm dia by means of bolts ,nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade ,wire mesh and lugs ,GI protection pipe of 15 mm bore light grade up to 7.5 mtr long ,etc complete all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.

Supply and fixing LED flood lights 120 watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

SAI MAX INFRAPROJECTS (BID ID -3143186)

G K CONSTRUCTIONS (BID ID -3143484)

P K ENTERPRISES (BID ID -3147225)