Tender ID

Karnataka

Retender

Works

Water supply/sewage lines

Providing fhtcs to 230 household in Valakaladinni habitation of Valakaladinni village in Hungund taluka in Bagalkot district by augmentation of svs to Valakaladinni village Gen

Rural Drinking Water and Sanitation Department

RWSSD Division Office Bagalakote | Karnataka

Amount: ₹42.9 LCloses: 11 Feb 2026Closed

Timeline

Published4 Feb 2026
Closed11 Feb 2026
Retendered4 Feb 2026

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 4 Feb 2026

Tender Value

₹42.9 L

EMD Value

₹85,800

Closing Date

11 Feb 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Drinking Water and Sanitation Department

Contact Person

Akash

Office Number

Mobile Number

Work Description

Providing fhtcs to 230 household in Valakaladinni habitation of Valakaladinni village in Hungund taluka in Bagalkot district by augmentation of svs to Valakaladinni village (Gen)

Tender Information

Tender ID

RWSSD/2025-26/WS/WORK_INDENT9831

Reference Number

RWSSD/2025-26/WS/WORK_INDENT9831

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Electronic Documents, First(One Cover)

Location

RWSSD Division Office Bagalakote

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredMinimum financial turnover civil engineering construction works not less than two times the annual payments from this contract AS PER THE AMOUNT PUT TO TENDER VALUE

RequiredThe tenderer should possess Civil valid Registration of appropriate class with KPWD department

RequiredThe tenderer must submit ongoing work commitments certified by an officer not below the rank of Executive Engineer to compute available tender capacity

RequiredAccurate postal address and phone number / Mobile number

RequiredBidder should posses at least 50 Percentage of having similar nature of work done certificate certified by an officer of rank not less than Executive Engineer in the last 5 years.

RequiredThe tenderer should possess valid GST registration

RequiredFDR in the name of Executive Engineer RDW&S Bagalkot should be taken for the difference amount quoted by contractor. The scan copy of FDR should be enclosed with tender documents. & Original copy of FDR should be handed over to Executive Engineer RDW&S, Bagalkot before opening of Tenders.

RequiredSite inspection certificate obtained from AEE regarding performance of contractor for should be enclosed with tender

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Eligible tenderers may submit tender for the work

Conditional tender will not be Considered

The employer reserves the right to accept or reject any of the tender without assigning any reason and subjected to change as per Govt. Circular and order as and when issued.

One Percentage (1%) of Bill Amount of the Successful Tenderer will be deducted as Labour cess

Contractors who have not completed the works in time in this division will not be entitled to Bid and if participated it will not be considered .

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value.

Even though the tenderers meet the all the criteria they are subject to be disqualified if they have. - made misleading or false representations in forms , statement and attachments submitted in proof of the qualification requirements and/or - record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc., and/or -Participated in the previous tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification

The Defect liability period is 1 years. The contractor has the liability of maintaining the work done to a period of 1 Years from the date of completion of the work at his cost.

The work should be completed as per the schedule other wise the penalty of 0.1% will be imposed to maximum of 10% of amount put to tender

Videography and photographs in three stages should be taken and submitted along with the bill (before starting, during execution and after completion of work) in the presence of the section officer

The tender documents to be uploaded should be in original copy.

The Rates are inclusive of all lead, lift, loading and unloading, all incidental charges and unforeseen charges. The work should be executed as per the direction of Engineer-in-charge of the work, No extra claims

All information regarding postponement modification etc., to the tender shall be published in www.kppp.karnataka.gov.in Bidders shall not be informed by post or by publication in news paper

All water supply & related works should be handed over to concerned Gram Panchayat for further maintenance

Bidder should procure materials of standard make having ISI, BSI Certification & should submit test reports for all materials from authorized/recommended testing, quality assurance agencies for payment of bills.

Bidder should submit a attentive work program along with the bid. The bid submitted by the bidder shall be in force for 90 days from the date of submission of tenders.

FDR in the name of Executive Engineer RDW&S Bagalkot should be taken for the difference amount quoted by contractor. The scan copy of FDR should be enclosed with tender documents. & Original copy of FDR should be handed over to Executive Engineer RDW&S, Bagalkot before opening of Tenders.

Contractor has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials. Contractor should procure only ISI mark materials and All the materials to be utilised for the work must be tested in PRED labs and Quality control test reports must be enclosed to the bills. All type of Pipes and Pumping Machinary with accessories must be tested in CIPET institutes. Cost of all QC test must be borne by contractor.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value

Failure of the successful tenderer to comply with the requirements as per 13.6 of Bid document Shall constitute sufficient grounds for cancellations of the award and forfeiture of the Earnest money deposit sub clause

Interested bidders should contact KPPP Help Desk 918046010000, 918068948777 for any problems and assistance.

Within 20 days of receipt of the letter of acceptance, the Successful tenderer shall deliver to the employer a security deposit in any of the form given below for an amount equivalent to 5% of contract price plus additional security for un balanced tenders in accordance with clause 25.5 of ITT and as per Clause 29.1 of bid doc. For the KW clause 29.1 follow

Tenderer in his name should have in the last five years achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of not less than the two times of estimated annual payments under this contract

Only below rate and CSR rate quoted tenders are accept, above rate quoted tender are not accept

This tender is covered under World Bank Guidelines on Preventing and Combating Fraud and Corruption in Program for Results Financing dated February 1, 2012, and revised on July 10, 2015. Requirements under these guidelines include but are not limited to (a) the borrowers obligation on informing the World Bank about all Fraud & Corruption related allegations and investigations, (b) the World Banks right to conduct administrative inquiries, and (c) Ineligibility of debarred firms for contract awards. The latest list of the Banks debarred firms is available online

GST shall be paid separately provided GST as per 447/12/2022 dt: 30/07/2022 shall be followed separately

Satisfactorily completed as prime contractor, at least one similar work of value not less than 50% of Amount put to tender. (usually not less than 50% estimated value of contract)

The Earn Money Deposit (EMD) shall be deposited either through e-Bank Guarantee or through e-proc portal as per circular No.FD-5/Exp-12/2023 Dated: 10-02-2023.

ALL OTHER TERMS AND CONDITIONS ARE APPLY AS PER THE TENDER BID DOCUMENT.

Fee & Financial Details

Tender Fee Amount

₹1,080

EMD Fee Amount

₹85,800

Important Dates

Last Activity

4 Feb 2026

Published

4 Feb 2026

Download Ends

7 Feb 2026

BOQ Preview

•

Providing fhtcs to 230 household in valakaladinni habitation of valakaladinni village in hungund taluka in bagalkot district by augmentation of svs to valakaladinni village Gen

•

Providing fhtcs to230 household in valakaladinni habitation of valakaladinni village in hungund taluka in bagalkot district by augmentation of svs to valakaladinni village (Gen)

•

Distribution system :...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

•

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, l...

•

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, lay...

•

Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, l...

•

Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vac...

•

CC Road Restoration : Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggre...

•

Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth wi...

•

Supplying and fixing of fixed height surface box H -4057 MD - KU with PP 40% GF Lid housing of PA+ locking clip of PP with notched bolt M 12 x 130 hexagon hrad A2 - 70 for service connection valves de...

•

Proposed Fhtc ; Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. A. Cutting i...

•

Providing and-fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgs/sq.cm working pressur, of outside diameter with special flange, compression type fittings, wall clips, makin...

•

Approved make Electro fusion saddle comply with BS EN 12201-3:2011, PN - 12.5 rating and food grade raw material as per BS 6920 for effect on water quality intended for human consumption. Material of ...

•

Flow control Valve 10 LPM: Providing, & fixing Flow control valve using food grade materials SS 316 ball /1/2" [15mm] including cost of all materials, labour charges, HOM and testing complete as per o...

•

PP make female threaded elbow with SS304/Brass/Plastic inserts suitable for a pressure rating PN 16 (FTE 90 deg) 20x15mm (1/2 inch)

•

PP make Adopter suitable for a pressure rating PN 16 (Both side adopter) 20x15mm (1/2 inch)

•

PP make female end cap suitable for a pressure rating PN 16 End cap 20 mm

•

Supplying,laying,jointing, testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excl...

•

Providing 15 mm dia GM ferrules as per IS 2692 and with ISI mark rouby body hydraulically tested 2.00 HP of size 8 mm to 50 mm.

•

Supply and delivery at site wrought middle steel (galvanized) 15mm dia GI bend confirming to IS 1239-II, 1991 with latest amendments if any.

•

Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any.

•

Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239-II,1991 with latest amendments if any.

•

Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mm x height 250mm with openable lid...

•

Providing and fixing water meter with stop cock, jam, nut socket in G.I. pipe line including cutting and threading the pipe and making long screws including cost of materials, labour and HOM and testi...

•

Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications.

•

Supply and Fixing of RCC demarcation stones of 30 cms x 15 cms and 90 cms deep using 1:2:4 cc and 6mm dia rods for verticals and stirrups and rendered smooth, including engraving letters "KWB and Arro...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Centering works as per Appendix 5%- 1 provided in volume -1 of CSR Sl. No 2 total concrete cost

•

Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...

•

Providing and laying in position Reinforced cement concrete for RCC shaftsl. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...

•

Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...

•

Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

•

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anch...

•

Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending,...

•

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...

•

Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed i...

•

Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...

•

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

•

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

•

Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...

•

Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc.,complete to 2.50 M height.

•

Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the l...

•

Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...

•

Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....

•

Providing CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.

•

Providing Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.

•

Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:80 X 900

•

Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...

•

VALVE CHAMBER: Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix...

•

Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members...

•

Additionalities for Formwork, Centering & Scaffolding

•

Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 m center to center founded in M15 grade cement concrete, 0.6 metre below ground l...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-2 Valakaladinni.doc

Tender Document • 0.16 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Water supply/sewage lines

Providing fhtcs to 230 household in Valakaladinni habitation of Valakaladinni village in Hungund taluka in Bagalkot district by augmentation of svs to Valakaladinni village Gen

Rural Drinking Water and Sanitation Department

RWSSD Division Office Bagalakote | Karnataka

Amount: ₹42.9 LCloses: 11 Feb 2026Closed

Timeline

Published4 Feb 2026
Closed11 Feb 2026
Retendered4 Feb 2026