Provn of certain Special Repair and Minor work under AGE B/R Beas under GE kapurthala

Amount

Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters not exceeding 1.5 sqm but not exceeding 4 sqm each(without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge.

Dismanting wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

Dismanting asbestos cement (Corrugated, semi-corrugated, etc) sheets in roof coverings including ridges, complete all as specified and directed by Engr-in-Charge.

Demolition of brick work of Toe wall or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

Dismanting stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed by Engr-in-Charge.

Demolition cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of (Unreinforced) in ground floors and pavings not exceeding 15cm thickness below or above ground level including tiles, terrazzo/stones etc complete all as specified and directed by Engr-in-Charge.

Demolition reinforced cement concrete of any description and in any position not otherwise specifully provided for complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing bore of pipe in 15mm and connections, etc complete all as specified and directed by Engr-in-Charge.

All as per item No 12 above but of 20mm bore, complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class 'B" bricks using old size bricks straight or curved on plan exceeding 6m mean radious built in CM 1:6 etc, complete all as specified and directed by Engr-in-Charge.

Ditto- all as per item No 14 above but except bricks etc, complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 etc, complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class 'B" bricks using old size bricks straight or curved on plan exceeding 6m mean radious built in CM 1:6 etc, complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type B-1, 1:2:4 (12.5mm graded stone aggregate as in surface channels and drains, complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete (1:2:4) in roof kerbs or mudstops, rounded or chamfered on edge of floor and similar works etc, complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces with water proofing compound, finished even and smooth without using extra cement etc including neeru finish to plastering complete all as specified and directed by Engr-in-Charge. Note:- Water proffing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:2:4 Type B-1 ( 200mm graded stone aggregate) as in bed blocks, coping, etc complete all as specified and directed by Engr-in-Charge.

M&L for providing reinforced cement concrete cast in situ Type B-1, 1:2:4 (20 mm graded stone aggregate) as in lintels upto 1.5m clear span including necessary formwork complete all as specified and directed by Engr-in-Charge. Note:- Reinforcement shall be measured and paid seperately.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in chajjas, complete all as specified and directed by Engr-in-Charge.

Use and waste for formwork to chullah hoods, Chajjas, troughs and similar items including edges complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-Charge.

Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work: not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed by Engr-in-Charge.

Ditto- all as per item No 28 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered surfaes and applying two coats of cement base paint over a coat of chalk whiting/priming on plastered surfaces of walls, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaes and applying two coats of cement base paint over a coat of chalk whiting/priming on plastered surfaces of walls, complete all as specified and directed by Engr-in-Charge.

M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectunglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7mm thick laid over 10mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame os size 50mmx47mm made out out of 5mm plain colour PVC sheet reinforced with M.S.Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

All as per item No 38 above but wire gauzed i.e panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrappd on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed by Engr-in-Charge.

S&F steel ventilator 1.25mm thick box type fixed type prepared for fixing of gauzed and glass (primer coated) ERW hollow P secton of size 60mmx25mm including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 four Nos for each vent) including following fitting welded to frame shutter: (a) shape-04 Nos per vent (b) Handles of Z Sec 20mm x 100mm long (c) Stay (d) Cleat 55mm long of hollow square 15mm x20mmx63mm welded to hinges - 01 No per leaf (e) Mild steel Pintal hinges of size 75mm x 75mm x 12mm - 02 Nos (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh/glass pane and painting shall be masure and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

Supply only 4mm thick figured glass, pinhead type in squares not exceeding 0.5 sqm each pane complete all as specified and directed by Engr-in-Charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed by Engr-in-Charge.

S&F 100mm size stainless steel but hinges, medium wight complete all as specified and directed by Engr-in-Charge.

S&Faluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed length of bolt 250mm complete all as specified and directed by Engr-in-Charge.

S&F aluminium handles, cast type anodised of size 125mm etc, complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorwith Overall length of cover plate 140mm, complete all as specified and directed by Engr-in-Charge.

S&F roof truss/framed works as in purlins, crane grantries, rails and fastening and heavy brackets framing beam (of tee, angle, pipes of flat section base plates and necessary welding, fixing with nut & bolt and confirming FE 410-W (Gde-E-250) Qualtiy B etc as per site requirement) including distance pieces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI baed corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washers, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI baed plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washer, complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed including 15mm dia pillar taps, cast copper alloy with capstan heads swan neck chromium plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type and fixed etc, complete all as specified and directed by Engr-in-Charge.

S&F in repair low level flushing system PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing brackets of MS angle of size (25mmx25mmx3mm), 30 cm long in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, scrwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed but fancy tye, brass chromium plated, complete all as specified and directed by Engr-in-Charge.

S&F in repair stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, scrwed down, high pressure, with crutch or but terly handle, screwed both ends for iron pipe and fixed but fancy tye, brass chromium plated with long shank and cup (concealed type) etc complete all as specified and directed by Engr-in-Charge.

M&L for chromium plated long body bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc, complete all as specified and directed by Engr-in-Charge.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, 20mm bore dia of pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repairs shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia, complete all as specified and directed by Engr-in-Charge.

S&F CP garting 100mm dia with waste hole of ec complete all a specified and directed, complete all as specified and directed by Engr-in-Charge.

S&F towel rail 600mm long of stainless steel fixed with and including Chromium plated bras screws and or cleats, complete all as specified and directed by Engr-in-Charge.

S&F CP soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge.

Disconnecting existing PVC water tanks, setting aside (or lowering if required) and cleaning and removing all scales and dust from PVC water tank manually and cleaning, scraping inner surfaces of tank by means of brush and then washing with clear water and cleaning of mouths of circulating pipes of capacity of tank exceding 250 litre but not exceeding 500 litre and reconnecting and refixing in position, complete all as specified and directed by Engr-in-Charge.

Supply and fixing rotational moulded polythelene water storage tank triple layered with (cylindrical vertical closed top) hoisted and fixed in position as per SSR Prat-I of 1000 Ltrs capacity including fittings complete all as specified and directed by Engr-in-Charge.

Cutting holes into or through brick walls superfacial area n.exc. 150 sqm bult in cement mortar or cement lime mortar and making good in c.m 1:3 or cement concrete 1:2:4 type B-1 including matching the surfaces with the existing surface finishes complete all as specified and directed by Engr-in-Charge.

S&F steel tubes medium grade bore of tube in 20mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc including cutting chases, pinning in brick walls making good to facings complete all as specified and directed by Engr-in-Charge.

Excavating in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m depth for foundation & getting out, complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in foundation, filling and mass concrete, sub base etc complete all as specified and directed by Engr-in-Charge.

Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25cm for soft/loose soil, complete all as specified and directed by Engr-in-Charge.

Removing excavated material (soil) to a distance not exceeding 50m and depositing where directed of a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

Supply & lay 200mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:3:6 type C-2 as in concrete bed to drain pipes for bore dia of 200mm including packing under, and haunching against the sides of pipes after they are laid and tested; in, complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete type B-1, 1:2:4 as in cover slabs over drain/manholes etc. including necessary formwork, complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down water closet "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding. complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), while (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices with recessed bottom, jet spray, etc complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC(SWR) bend any radius, complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal, complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap of 110mm outlet dia, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls as a vent pipe, complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR)vent cowl, complete all as specified and directed by Engr-in-Charge.

M&L for 50mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in plinth protection finished even and fair laid to a slope of 1 in 20 in alternate bays, each bay not exceeding 3m in length with joint to be filled with bituminous mastic filling comprising a mixture of 1 part of heated hot blown bitumen 85/25 penetration and three parts of heated sand, complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishin, treating the surface with bees wax polish, complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each not exceeding 0.50 cum, and getting out, returning filing in and ramming earth with broken rubble mixed with earth around in layers not exceeding 25cm, watering etc and removing surplus soil not rcvrrfomh 50m and making good surface in loose/soft soil, complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick PCC floor type B1, 1:2:4 (20mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge.

S&F MS pipes as in vertical posts, fixed with angle cleats or other connecting plates, rivets nut bolts etc, complete all as specified and directed by Engr-in-Charge.

M&L for sand filling under Machine pressed precast concrete interlocking paver block floors including watering and sonsolidation complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concerte interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 80mm thickness with grey cement and pigment, M-35 complete all as specified and directed by Engr-in-Charge.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- (a) One light point controlled by one, one way switch

(b) One fan point controlled by one, one way switch

(c) One socket outlet 3 Pin, 5 Amp on independent board

(d) One socket outlet 3 Pin, 5 Amp on same board.

M&L for point wiring with 2.5 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board, complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 5 Amp complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 15 Amp complete all as specified and as directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified and as directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and as directed by Engr-in-Charge.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof and Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W complete all as specified and as directed by Engr-in-Charge.

S&F in repair LED mirror light fitting 2 ft in 10 watt. along with all accessories, pre-wired fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed by Engr-in-Charge.

S&F LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape complete all as specified and as directed by Engr-in-Charge.

S&F in replacement Exhaust fans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specified and as directed by Engr-in-Charge.

S&F water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed by Engr-in-Charge.

S&F sheet metal enlosure single pole and neutral with two pin socket and earth plug complete with one MCB single pole 240 volts 20 amps complete all as specified and as directed by Engr-in-Charge.

S&F GI pipe medium grade with all fitting laid in trenches of size 15 mm bore complete all as specified and as directed by Engr-in-Charge.

M&L for Hot water tap of brass/gun metal 15 mm bore complete all as specified and as directed by Engr-in-Charge.

S&F gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of size 15 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F hot water PVC connections for geysers including necessary clamps, nuts and bolts etc complete all as specified and as directed by Engr-in-Charge.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 10 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

All as per item No 111 above but 16 sqmm 2 core

All as per item No 111 above but 16 sqmm 4 core

All as per item No 111 above but 50 sqmm 3.5 core

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed by Engr-in-Charge.

M&L or brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed by Engr-in-Charge.

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 12 way single pole and neutral link complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- (a) S & F of MCB, 10 to 32 Amp, SP, 240 Volt

(b) S&F of MCB, 25 to 32 to Amp, SPN, 240 Volt

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and directed by Engr-in-Charge.

Dismantling of PCC pole with foundation of any size complete all as specified and directed by Engr-in-Charge.

Dismantling/Taking out ACSR conductor/GI wire complete all as specified and directed by Engr-in-Charge.

M&L for tube light gread GI laid under road/culvert/drain fixed to pole wall with help of flat iron clamps etc for cable protection for the following sizes :- (a) 40mm nominal bore

All as per item No 123 above but 50mm nominal bore complete all as specified and directed by Engr-in-Charge.

S&F LED street light fitting 60 Watt 230 V AC Raptor NEO street lights are aerodynamically designed for weather conditions with excellent thermal management made with high pressure die cast housing with toughened glass and high power LEDs with secondery optical and IP 65 protection efficiency > 110LPW 10KV SPD included complete all as specified and directed by Engr-in-Charge.

Supply, fixing and installation of Octagonal poles hot dip galvanized steel (IS 5986 Gr. Fe 510) Octagonal pole model NJOP 7 of 7.0 mtr long, top top die 70 mm botom dia 130 mm having thickness 3 mm having door operating of size 500 mm above ground level with CI Base plate of size 220x12mm having PCD 205 mm foundation J bolts length 700 mm nuts and screwes, No's of bolts 4 x 20 and having hot dip galvanized Single plain arm bracket 1000 mm overhang on one side with 48.3 mm outer dia pipe of thickness 3.2 mm fixed on top with bolts and necessary earth work RCC/PCC work for the foundation of pole, including necessary form work and fare finish to exposed surfaces without using extra cement etc complete all as specified and directed by Engr-in-Charge.

S&F PVC junction box with hinged door and locking arrangements, weatherproof with IP 65 protection and facilited for cable entry in and out of size 150mmx100mm to be fixed on circular steel pole including fixing arrangements with 4 mm MS clamps and nut bolt of suitable size and comprising of PVC connector and MCB SP 10 KA, 6Amps for controlled two No's of LED Lights complete all as specified and directed by Engr-in-Charge.

kaushal builders

s.v and co

SONA BUILDERS