Annual Maintenance Plan for the year 2026-27 on Kuddi to Hobar Road Km. 0/00 to 3/150 (Village Road)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. as per the entire statisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidental. The rate including the octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 Kg (zero point eighty five killograme) per square metre using mechanical means as per technical specification Clause 502 and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying bituminous macadom with 40-60 TPH (forty- sixty tonne per hour) batch type HMP producing an average output of 75 (seventy five) tonnes per hour with using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5% (Four point five ) per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignmernt , rolling with smooth wheel , vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No 505 complete in all respect and to the entire satisfaction of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect.The rate is inclusive of octroi, royality ,Malkana, toll tax ,GST or any other taxes imposed by the Government .

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two hundred seventy five killograme) per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 and as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 30mm (Thirty millimetre) compacted thick bituminous concrete with min 40-60 TPH (forty- sixty tonne per hour) hot mix batch type/drum type plant with electronic control Grading-II using crushed aggregate 13mm (Thirteen millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity Grade-ten) @ 5.50% (five decimal five zero percent) of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth wheeled roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic type roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MORTH technical specification clause No. 509 and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound paint 2.5mm (two point five millimeter) thick including reflectrosing glass beads @ 300 gms (three hundred grams) per square meter area , thickness of 2.5mm (two point five millimeters) of surface applied glass bead, all by road marking machine. The finished surface to be level, uniform and free from streaks and holes, complete as per IRC:35 and MORTH technical specification clause 803.4 including carriage of materials within all leads and lifts and other incidental.The rate including the octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.