Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹47,141 Per unit ₹9.43 · 5,000 Nos. |
Tender Value
Refer Docs
Closing Date
9 Oct 2026, 11:00 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
RDSO
60 days
Expenditure
General
83
1 condition
This item is restricted to be procured from RDSO approved sources only Item ID 3100249.The quantity allocation shall be as under:- 1 Developmental Vendors shall be eligible for developmental order of up to 20 % of NPQ in regular tenders. 2.Approved sources shall be eligible for bulk order 3. Where there are not more than three Indian suppliers categorized as Approved source for the tendered item , developmental vendors can be considered for placement of bulk order without any quantity restrictions. However, developmental vendors to upload the documents regarding their past performance for the tendered item and documents regarding their capacity/capability to manufacture and supply the tendered of stores.
20 conditions
Make In India Preference policy :- In keeping with the Public Procurement (Preference to Make in India) Order, 2017 as amended, procurement of the item is restricted to Class I and class II local suppliers. Minimum local content requirement for Class-I local supplier is minimum 50 % . For Class-II local supplier is minimum 20 % . Non local suppliers: The bidders offering imported products will fall under the category of Non- local suppliers- As per MINISTRY OF RAILWAYS - RAILWAY BOARD letter ..2020/ RS(G)/779/2-Part-1 Dated: 17/05/2021. The vendors with local content less than 20% should not quote in the tender who do not qualify to be Class I and class II local suppliers, as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I and class II local supplier for tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
By consignee
DELIVERY TERMS : FREE AT DESTINATION.
Warranty clause : As per IRS terms and condition of contract.
Single use plastic should not be used in packing of material to be supplied otherwise it will be rejected.
3 locations across Madhya Pradesh · 11,000 Numbers · 600 Set total
HEX HEAD BOLT & HEX HEAD SCREW
83266775~WR
83266775
Limited - Indigenous
Goods
Madhya Pradesh
₹0
Exempted
13 Oct 2026
26 Sept 2026
7 items · 11,000 Numbers · 600 Set total
HEX HEAD BOLT M16X65 HIGH TENSILE AS PER IS:1364 PART-1-2002, CE-WITH PROPERTY CLASS-10.9 TO IS:1367 PART-3-2002, COATING AS PER MDTS-057. NOTE: ITEM SHALL BE PROCURED FROM RDSO APPROVED SOURCES OF AXLE END HIGH TENSILE CAP SCREWS TO BE USED IN END HOLES OF BG FREIGHT AXLES. [ Warranty Period: 30 M onths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) MHOW, WR | Madhya Pradesh | 2000.00 Numbers |
| Total | 2,000 Numbers | |
HEX HEAD BOLT M16X65 HIGH TENSILE as per Drg. No. IS: 1364(PART-1)-2002, CE-WITH PROPERTY CLAS S- 10.9 TO IS : 1367(PART-3)-2002, COATING AS PER MDTS-057.ITEM TO BE SUPPLIED BY RDSO APPROVED VENDORS O NLY [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) INDORE, WR | Madhya Pradesh | 1500.00 Numbers |
| Total | 1,500 Numbers | |
HEX HEAD SCREW M16X50 HIGH TENSILE AS PER IS: 1364 PART-2-2002, CE-WITH PROPERTY CLASS-10.9 TO IS:1367 PART-3- 2002, COATING AS PER MDTS-057 [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) INDORE, WR | Madhya Pradesh | 500.00 Numbers |
| Total | 500 Numbers | |
Set of fasteners for Installation lever where one set consist of 05 items (1) Hex Head Bolt M10x60MM (hav ing 40 MM Thread) as per Is 1364 (Part -1) Class 8.8 Qty, = 02 Nos, (60 mm length with hole for inserting split pin at en d), (2) Nut M10 as per IS 1364 (Part -3) Class 8, Qty 4 Nos, (3) Lock Nut M10 as per IS 1364 (Part -4) Class 8, Qty. = 2 No s, (4) Split pin Size 2.5x25mm as per IS 549 Oty.= 02 Nos. (5) Plain Washer for M10 bolt as per IS 2016-1967 Qty. =02 Nos. Fasteners shall be zinc passivated to grade A3L of IS: 1367 (1367) (Part - 11) for fasteners. [ Warranty Period: 3 0 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) INDORE, WR | Madhya Pradesh | 600.00 Set |
| Total | 600 Set | |
HEX HEAD SCREW M10X16 conforming to IS 1364 (Part 2) : 2002, IS 1367 (Part 3) : 2002, Grade 10.9,CE, ZINC COATING TO MDTS-057, ITEMS SHALL BE PROCURED WITH STANDARD MARKINGS AND PACKING. ACCEPTED MAKE/ BRAND - TVS/DFL/UNBRAKO/TUFF AND AS PER LATEST APPROVED BRANDS BY RAILWAY FOR THIS ITEM [ Warranty Per iod: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) MHOW, WR | Madhya Pradesh | 1000.00 Numbers |
| Total | 1,000 Numbers | |
HEX HEAD SCREW M10X30 HIGH TENSILE IS:1364(PART-2)-2002,CE-WITH PROPERTY CLASS-10.9 TO IS:13 67(PART-3)-2002, COATING AS PER MDTS 057Spec: [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) MHOW, WR | Madhya Pradesh | 1000.00 Numbers |
| Total | 1,000 Numbers | |
Hex Head screw M10x25 confirming to IS 1364 (Part 2) : 2002, IS 1367 (Part 3) : 2002, 10.9, CE, MDTS-05 7, RDSO approved sources of Axle End High Tensile Cap Screws. [ Warranty Period: 30 Months after the date of delive ry ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) INDORE, WR | Madhya Pradesh | 5000.00 Numbers |
| Total | 5,000 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
01.11.2025LetterforImprovementinReliabilityofStiffenerplateofCBC.pdf 01.11.2025LetterforImprovementinReliabilityofStiff
ATTACHMENT
01.11.2025LetterforImprovementinReliabilityofStiffenerplateofCBC.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .