Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹40 L
EMD Value
₹40,000
Closing Date
15 Jun 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
THE COMMISSIONER, ERODE CITY MUNICIPAL CORPORATION
246, MEENAKSHI SUNDARANAR SALAI, ERODE - 638001.
Construction of 2 Class Room Building at Periyavalsu Primary School at Valliammai Street-1 in Ward No-20.
2023_MAWS_325622_1
E1-1989-2022.
Open Tender
Civil Works
Works
90 days
ERODE CITY MUNICIPAL CORPORATION
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹40,000
16 Jun 2023
10 Jun 2023
16 Jun 2023
10 Jun 2023
15 Jun 2023
10 Jun 2023
Amount
Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum a) ORDINARY SOIL (SS20A) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand , silt or other loose soil, wet Sand y loam and ordinary soil including excavated earth etc., complete .(PWD Sch. No. 49 Pg.No. 25)3
Removing of Hard Rock by weding Cheselling and trimming to proper shape Where blasting is Prohibited,with initial lead and lift of 10 metres and initial lift of 2 metres etc complete as per standard specification
Supplying and filling in foundation with clean dry river sand from the approved quarry in layers of not exceeding 15cm thick well rammed watered and consolidated including cost and conveyance of sand to site and all labour charges and other incidental charges etc., complete complying with standard specification
Cement concrete 1:4:8 mix (One cement four M sand and eight metal) using 40mm ISS hard broken granite stone jelly for foundation and flooring including dewatering wherever necessary and laid in layers of not exceeding 15cm thick to required thickness including cost and conveyance of all materials to work site and labour charges etc., complete complying with standard specification
Refilling in basement with excavated earth in layers of not more than 15cm thick well rammed and consolidated etc., Complete as per standard Specifcation
Supplying and filling in Well Gravel from the approved quarry in layers of not exceeding 15cm thick well rammed watered and consolidated including cost and conveyance of sand to site and all labour charges and other incidental charges etc., complete complying with standard specification
Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc. Centering for soffits of RCC slabs plain surface including strutting upto 3 meter height using mild steel sheet of size 90cmx60cmx10 gauge with MS angles of size 25mmx2mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced upto 90cm c/c and supported casurina props or 10cm to 13cm dia spaced at 0.750cm c/c complying with standard specification and as directed by the departmental officer
a) Grade beam and Side wall
b) Rectangular and Square Column
c) Slab and Beams
Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of M sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)
a) Below 1.50m Depth From G.L
B) G.F Up to 4.50M From G.L
Reinforced cement concrete 1:2:4 mix (One cement two M sand and four aggregate) for all reinforced cement concrete works using 20mm ISS gauge hard broken granite stone metal including cost and conveyance of all materials at site including all labour charges for concrete mixing laying concrete finishing the surface neatly watering curing property laid excluding the cost of steel reinforcement and centering etc., complete complying with standard specification
A) G.F Up to 4.50M From G.L
Supplying, fabrication and placing in position of mild steel or ribbed tar steel for reinforced cement works including cost of steel binding wire all labour charges for cutting fabrication and placing of rods and other incidental charges etc., complete as per standard specification
Plastering with cement mortar 1:3 mix (One cement and three sand) 10mm thick concrete surface cleaning, curing etc., complete including cost of materials to site etc., complete as per standard specification
Fly ash Brick work in cement mortar 1:5 mix using (One cement and five M sand) using best quality of Fly Ash bricks of size(22cmx11cmx7cm) for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
a) Basement up to 1.50M From G.L
b) Ground Floor up to 4.50M From G.L
Plastering with cement mortar 1:5 mix (One cement and Five M sand) 12 mm thick Over Brick wall including cost of materials to site etc., complete as per standard specification
Weathering course concrete broken brick jelly20mm size in pure slacked lime over RCC roof slab in proportion 32:12.5 for required depth of the giving required slope and thickness of roof well beaters by the wooden beaters etc., complete as per standard specification
Paving the floor with Solar Reflective ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three M sand ) 20mm thick laid in-situ and pointed with same coloured cement
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bends, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.160mm dia PVC Pipe [4 Kg/SqCm]
Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three M sand) to 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work
Painting two coats white Janathacem including all labour charges cost and conveyance of all materials to site etc., complete as per standard specification-
Painting two coats with ready mixed Plastic Emulsion /Weather Shiled Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
Painting two coats over New iron work including Cost of paint cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
Supply and fixing of RCC precast slab in cement concrete 1:1.5:3 mix (One cement ne point five M sand and three aggregate) using 20mm ISS metal including cost of moulding charges mixing, laying and curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification but excluding cost of reinforcement
a)75mmThick
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the oncealed portion with suitable colour for PVC oncealed light / fan Point (for electronic regulator) (5 points per coil) SD 25
Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point- SD-40 /Rs1206.20
Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet SD138
Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour -SD-55/Rs116.80
Supply and run of 2 of 4sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour-SD-57/Rs 164.30
Supply and fixing osf single box type 4"36w flu. Fitting complete with copper choke and condenso with TW round blocks on wall or ceiling with flu. Tube with PVC unsheathed leads from terminals to the fitting.[SD 87]
Supplying and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 1 m down rod with fan clamp, side plates and cross arm of size departmental officers. (18") etc., complete as directed by the Departmental officers-SD 106
Roofing With Galvalume 0.5mm thick ( PVDF coating Sheet -Colour Off White)-(The composition of theGalvalume sheet coating is typically 55% aluminum, 1.6% silicon and the balance zinc,nominal percentages by weight. The Sheet is described in ASTM Specification A 792 Triple Spot Average Minimum oz/sq ft 0.50 0.55 0.60 Single Spot Minimum oz/sq ft 0.43 0.50 0.52 A nominal coating weight of 0.50 oz/sq ft (total both sides) is equivalent to 0.8 mil thickness per side. The coating is available as regular spangle or extra smooth surface, with or without chemical treatment. An oil coating may also be specified on bare Galvalume sheet). Including Cost and conveyance of all materials to site and labour for laying including cost of bolts and nuts and other tools and plants etc complete as per standard specification
Supply and Fixing UPVC ( Un-Plasticized Polyvinyl Chloride) windows of casement tybe (Open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered section with wall thick of 2mm. The EPDM rubber ( Block Colour) Converted with over all the edges of frame and shutter the shutter will be provided with Esoag muti power point locks and also it operates as handle,the corners and joints should be welded and cleaned,Radiation free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action security protective hinges storng locking systems and as per size for arresting noise and energy loss, The connection mechanism between sash and outer frame that enable opening of the window. The windows should be fixed to the wall with 100% packing with Screw and Silicon Packing all round the frames. Thw window should be got approved from the Executive Engineer before use on work.
Supplying & fixing door shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,double leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete.
Supply and fixing of country wood scantling wrought and put up for frames of door and windows including fixing holdfast and all labour charges cost and conveyance of all charges etc., complete as per standard specification
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
Supplying and fixing CUDDAPAH SLAB 20/30 mm thick in both side polished for cubboard self and kitchen plat forms including fixing in position with all necessary accessories etc.,complete complying with standard specification and as directed by the departmental officers.
stage.html
html • 0.02 MB
finance_386265.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .