C/o RCC Circular tank (36000 Lts)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.50 m, as directed by Engineer-in-charge All kind of siol / Ordinary rock

P/L cement Concret 1:5:10 (1 cement:5 Sand:10 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth carriage of material in all lead and lifts

P/F work with steel plates 3.15mm thick weldid with angle iron in frame 30x30x5mm so as to give a fair finish including sentring, shuttering , strutting and propping etc. with wooden battens and ballis, height of propping and sentring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concret and plain concret work in carriage of material in all lead and lifts vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster buttresses, plinth and string cources and the like

Providing and laying in position specified grade of reinforced cement Concret work 1:1.5:3( 1 cement:1.5 Sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth carriage of material in all lead and lifts

Wall ( any thickness but not less than 0.1 mtr thickness) attached pillasters, butresses, plinth and string courses etc. from top to foundation level upto floor two level :

Providing steel reinforcement for RCC work including straightening , cutting , bending, placing in position and binding all complete upto plinth & above level carriage of material in all lead and lifts Mild steel and Medium Tensile steel bars

Smooth finishing of the exposed surface of RCC work with 6 mm thick cement mortar 1:3 (1cement :3 sand ) carriage of material in all lead and lifts

Providing and fixing angle iron 35x35x5 mm post & strut of required size including bottom with G.I wire netting 4 mm of SWG 6 in 10 x 10 cm mesh etc. in all respect Complete carriage of material in all lead and lifts

P/F of MS wheel valve 40 mm dia with nipples and reducers in all respect complete carriage of material in all lead and lifts

Providing and fixing of GI pipe 40 mm dia in all respect complete carriage of material in all lead and lifts

Painting tank wall for sign board with writing etc. complete in all respect carriage of material in all lead and lifts

AMIT KUMAR