GEU(N) 76 2021 22 SPECIAL REPAIRS TO SINGLE JCO LIVING AT BLDG NO P63 AND P64 OF GE (NORTH) UDHAMPUR

Amount

M&L for taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar 1:6 complete all as specified.

M&L for 5mm thick rendering on fair faces of concrete surfaces, finished even and smooth,as in ceiling in cement mortar 1:3complete all as specified.

M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar 1:4 complete all as specified.

M&L 10mm thick cement plaster on fair face of concrete surface in CM 1:3 finished even and smooth without using extra cement over and including brushing neat cement slurry @3Kg of cement per Sqm complete all as specified and directed

M&L for preparing RCC roof slab top by wire brushing and cleaning the dust and forign materail etc complete and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm over a coat of bitumen primer @ 0.40 ltrs/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing not less than 3.5 kg/Sqm and reinforced with polyster non woven fabric (wt. not less than 150 gms/Sqm) laid on bituminous surface by press application method with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch application and overlaps sealed and finished neat, after that applying one coat of bitumen 85/25 grade on top surface @ 1.20 kg/Sqm and blinded with premier dry sand @ 0.5 kg/Sqm dusted over bitumen coat, complete all as specified and as directed.

M&L for preparing treated roof surface and applying two coats of aluminium paint over roof treatement complete all as specified and as directed by Engr-in-Charge.

M&L for taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified and as directed by Engr-in-Charge.

Fixing only steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, all as specified.

S&F Rotational moulded PVC water tanks of Cap 1000 Ltrs cylindrical verticle with closed top hoisted and fixed in position all as spd in SSR Part incl fixing of 20mm PTMT float valve medium grade dismanteling of existing unserviceable water tanks and removal from site complete all as specified and as directed by Engr-in-Charge.

S&F in repair 18 mm thick prelaminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in shelves , cup board shutters etc, complete all as specified and directed.

Extra over rates of MDF board 18/19mm wide for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed by Engr-in-Charge.

M&L for pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including supply and fixing necessary fixing lugs, hinges, lock strike plate, hold fast etc. complete, of frame size 105 mm x 60 mm, including one shop coat of red oxide zinc chrome primer,complete all as specified and as directed by Engr-in-Charge.

M&L for pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including supply and fixing necessary fixing lugs, hinges, lock strike plate, hold fast etc. complete, of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer,complete all as specified and as directed by Engr-in-Charge.

M&L for factory Made PVC Moulded Door Shutter of wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, fix in frame at site as per specification & drawing as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.

M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam wall nut colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.

M&L for 35mm thick, factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters shall be as per IS:1003 ; supplied and fitted to chowkats complete, all as specified and directed by Engr in Charge.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face pannels, commercial type on both sides to match with both face covered with decorative face veneer & including matching lipping all around to match, complete all as specified and directed by Engineer-in charge.

M&L for steel windows & ventilators/box type comprised of tubular frame and shutters made out of 1.58mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (Grill,wire Mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed of welded incl 2 Nos tower bolts 150mm long for each leaf incl other fittings, hinges, handles tarred hold fasts etc. all as shown on drg No CEUZ TD-1517/15 sheet1/3 to 3/3 incl a coat of red oxide primer complete all as specified.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of new iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M & L for providing Chequred cement concrete tiles 25cm x 25cm x22 mm thick tiles set , jointed and pointed in neat cement slurry in floors with grey cement ant pigment laid over & incl 20 mm thk screed bed in CM 1:4 all complete all as specified and as directed by Engr-in-Charge.

M&L for treatment of sunken floor surfaces with 0.488 kg/Sqm first layer of slurry of cement mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer shall be allowed to be cured for 4 hours and then applying in second layer slurry of cement @ 0.242 Kg /Sqm mixed with acrylic based polymer based modified cementitiousc omposite compound @0.126 Kg/Sqm. This layer shall be allowed to be cured for 4 hours incl fixing of 32 mm dia GI spout pipe 450mm long complete all as specified and as directed by Engr-in-Charge.

M&L for dismantling cast iron work of any description etc complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4 of size 200mm x200mmx250mm, fixed in repair , complete all as specified and directed by Engineer-in-Charge.

M&L for 150 x 150mm size salt glazed stoneware gully traps, square or round mouthed type ‘P’ , fixed in repair , complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm bore cast iron traps P or S fixed in repair , complete all as specified and directed by Engineer-in-Charge.

M&L for Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M&L for Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joint fixed to walls with mild steel Clamp including takind down of existing pipe complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joint fixed to walls with mild steel Clamp including taking down of existing pipe complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm bore cast iron branch pieces, single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable for cast iron soil waste discharge pipe fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm bore cast iron branch pieces, single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches suitable for cast iron soil waste discharge pipe fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm bore cast iron bend (any radius) with duck's foot or heel rest fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm bore cast iron bend (any radius) with duck's foot or heel rest fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm bore cast iron diminishing pieces/junction plain any radius fixed as reducer, suitable for CI spun pipes fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm bore cast iron diminishing pieces/junction plain any radius fixed as reducer, suitable for CI spun pipes fixed in repair, complete all as specified and directed by Engineer-in-Charge.

M&L for demolition of brick work or stone masonary, built in cement mortar or cement lime mortar complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks st or curved on plan exc 6m mean radius built with cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

Description all as per item no 42 above but except bricks complete all as specified and as directed by Engr-in-Charge.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced concrete pipes, class NP2 of 150 mm bore laid in trenches and jointed with collars incl demolition & breaking of old unserviceable pipes all as specified & dir by Engr-in-charge.

M&L for concrete bed to drain pipes including packing under, and haunching against theNsides of pipes after they are laid and tested cement concerete type D2 1:4:8 all as spd & dir by Engr-in-Charge

M&L for drapery/Curtain rods of coloured aluminnium anodised alloy 25 mm dia (curtain rod) with fixing of domes, with matching brackets, fenules etc complete all as specified and as directed fixed in repairs complete all as specified and as directed by Engr-in-Charge.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.11 Sqm but n.exceeding 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface laid over & incl 10 mm thk screed bed in CM 1:4 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.18 Sqm but n.exceeding 0.38 Sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface laid over & incl 10 mm thk screed bed in CM 1:4 complete all as specified and directed.

Ditto all as per item above but as in skirting over vertical surfaces & including 10 mm thick cement mortar 1:3 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified.

M&L for LIght shade coloured vitrified tiles 10 mm thick (square/ractangular) polished area of each tiles not exceeding 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface laid over & incl 10 mm thk screed bed in CM 1:4 complete all as specified and directed.

Ditto all as per item above but as in skirting over vertical surfaces & including 10 mm thick cement mortar 1:3 rendering, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified.

M&L for 450mm x 300mm x 7 mm thick first quality coloured glazed ceramic tiles as in skirting/dado including 10 mm thick cement mortar 1:4 screed, set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

M&L for brass chromium plated towel ring round 200mm dia, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

M&L for 20mm dia brass chromium plated tubular towel rails, D type,60 cm long between flanges, fixed in repair, complete all as specified and as directed.

M&L for glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed by Engr-in-Charge.

M&L for corner Glass self ( With CP brakets) 225 x 225 mm complete all as specified and as directed.

M&L for single lever wall mixer 3 in 1, with provn of over head shower & hand shower, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over head shower, fixed in repair, complete all as specified and directed.

M&L for centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.

S&F hand shower 90mm round shape (telephonic shower), chromium plated, with 1500mm long 15mm bore chrome finish flexible pipe with hook, fixed in repair complete all as specified and directed.

S&F shower rose, brass, chromium plated, with CP arm 120mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.

S&F angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed

S&F angle valve,Twin type brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

S&F bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

S&F health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed.

S&F jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed complete all as specified and as directed.

S&F PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed

S&F PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

S&F soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repair complete all as specified and directed.

S&F CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed.

S&F CP brass grating 100mm dia, fixed in repair complete all as specified and as directed.

S&F toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.

S&F tumbler holder, brass, chromium plated, heavy duty, having suitable recesses made for hanging necessary bath items complete fixed with brass screws as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge.

S&F PVC valve less symphonic action type flushing cistern low level white inlet, ball valve, float and handle including brackets., Flush pipe and PVC connection, capacity of tank 10 Ltr complete all as in repairs complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain and flush pipe, fixed in repair complete all as specified and as directed by Engr-in-Charge.

S&F Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all all as specified.

S&F in repairs Vitreous china wash hand basin white flat back size 580x450mm including waste chain and plug and porcelain stopper but incl bracket CP waste coupling & waste pipe fixed in repair complete all as specified and as directed by Engr-in-Charge.

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in floors, sub base complete all as specified.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth without using extra cement complete all as specified.

S&F 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and rough to receive tiles without using extra cement complete all as specified.

M&L for machine cut kota stone slab flooring 20-25 mm thk over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including laying over 20mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar jointed with ditto as per item above & including 20mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall by applying 1 to 1.2mm thick Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying 1 to 1.2mm thick Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion incl complete removal of existing treatment all as specified and directed.

M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered surfaces of wall upto 7m height from ground level and at all locations as directed including scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge.

M&L for preparation of old plastered surfaces of wall and applying 1 to 1.2mm thick external wall care Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of weather proof exterior emulsion incl complete removal of existing treatment all as specified and directed.

M&L for granite (of any type) 18 mm to 20 mm thk work (table rubbed & polished) as in steps, jambs, pillars, window cills, cooking platforms and like ,machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over & incl 20 mm thk screed bed in CM 1:4 all as spd & dir

S&F magnet catchers 50mm steel plate MS body and striking plate incl letting in & fixed complete all as specified and as directed by Engr-in-Charge.

S&F 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, all as specified.

S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.

S&F mild steel, 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate in repair complete all as specified.

S&F door door stopper of aluminium power coated alloy long body (as per sample kept in GE's office) and tongue, anodised, with hard drawn steel spring, fixed in floor, 140mm overall length of cover plate complete all as specified and directed.

S&F 100mm long, stainless steel butt hinges for PVC door, complete all as specified and directed by Engr-in- Charge.

S&F continuous (piano) hinges width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

S&F 125mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified.

S&F 100 mm aluminium handles, cast type anodised in repair complete all as specified and directed. (ISI Mark)

M&L for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregates as in surface channels & drainsdirected complete, all as specified.

M&L PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregates as in copings, the like including weathering, slightly rounded or chamfered angles and throating, as directed complete, all as specified.

S&F powder coated aluminium door with powder coated anodized frame made of size 100x45mm of sheet thickness 1.5mm with one or more rebate including jointing cleats hinges etc for fixing powder coated anodized aluminium door shutter fully paneled )two NOs of panel on each shutter) with 5.5 mm thick tinted plain glass shutter rail made of 80x45mm of sheet thickness 1.5mm (top, bottom, middle and side rail). Single/double leaf side hung type including necessary joint cleats, anodized aluminium fitting/aluminium fitting such as aluminium butt hinges 100mm long 4 NOs on each shutter, aluminium anodized tower bolt 200mm long 3 NOs for each door, aluminium anodized handle 150 mm 2 NOs ‘D’ type for each. Shutter & locking 6 lever of make Harrison one on each door, bottom door spring one on each shutter. All door fitting except cleat shall be Ist marked (size of each door shall be as per site requirement) complete all as specified and as directed by Engr-in-Charge.

S&F powder coated aluminium windows air tight anodized frame made of size 100x45mm of sheet thickness 1.5mm with shutter stiles made of 80x45mm of sheet thickness 1.5mm with or without rebates, with 5.5mm thk tinted glass fixed with aluminium beads,incl necessary jointing cleats/ anodised aluminium fillets/ aluminium glazing clip with rubber gasket, with aluminium fitting such as aluminium butt hinges 100mm long 3 NOs on each shutter, aluminium anodized tower bolt 100mm long 2 NOs , aluminium anodized bow handle 100 mm 1 NOs ‘D’ type for each, aluminium hook and eye 150mm 1 no in each shutter incl aluminium grill 5 to 6 mm dia, size of mesh not exc 7.5 cm in either direction as approved by GE complete all as spd & as directed by Engr-in-Charge.

S&F Stainless steel pipe 50mm size square / round 16 gauge and grade 304 fixed to wall or in floors including necessary cutting holes and fixed with suitable epoxy resin in vertical / horizontal position cut to length required and welded all as directed and as specified.

S&F Stainless steel pipe 35mm size square / round 16 gauge and grade 304 fixed to wall or in floors including necessary cutting holes and fixed with suitable Epoxy resin in vertical / horizontal position cut to length required and welded all as directed and as specified.

S&F Stainless steel pipe/square 16 mm dia 16 gauge and grade 304 fixed in vertical/Horizontal position cut to length required and welded all as directed and as specified.

S&F Stainless steel grade 304 foot caps and top caps of 50 mm dia and 16 gauge thickness for baluster fixed to vertical pipes including necessary welding etc complete all as specified and as directed by Engr-in-Charge.

S&F Stainless steel grade 304 foot caps and top caps of 35 mm dia and 16 gauge thickness for baluster fixed to vertical pipes including necessary welding etc complete all as specified and as directed by Engr-in-Charge.

S&F Stainless steel grade 304 foot caps and top caps of 35 mm dia and 16 gauge thickness for baluster fixed to vertical pipes including necessary welding etc complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1.6 complete all as specified and as directed by Engr-in-Charge.

M&L for RCC type BO 1:2:4 (using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span) complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel bars 10mm dia and over,cut to length , bent to shape required, including cranking, bending spirally for hoopingfor columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing withclips complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel bars 6 to 8 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less tham 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

Taking down chowkat or frames with shutters (without taking each off shutters from the frames) n.exc 1.5sqm each complete all as specified and as directed by Engr-in-Charge.

All as per item no 105 above but exceeding 1.5sqm and not exc 4 sqm each.

M&L for preparation new decorated surfaces of walls surfaces and applying two coat of cement base paint over one coat of wall care putty over one coat of cement primercomplete all as specified and as directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over one coat of birla wall care putty complete all as specified and as directed by Engr-in-Charge.

S/F steel rolling shutter, without ball bearing, as specified including top cover, anchoring rod, hasp & staple and one shop coat of primer erected in position as indicated , complete gear operated type with chain wheel & hand chain complete all as specified and as directed by Engr-in-Charge.

S&F powder coted aluminium door sliding type with bottom/ top sliding railing complete air of powder coted aluminium frame made of size 100 mm x 45mm of section thickness - 1.50 mm thick with one or more rebates including jointing cleats etc for fixing aluminium anodised door shutter fully panelled (or two no of panels on each shutter) with 5.5mm thick tinted glass as in panels shutter rail made of 80mm x 45mm of sheet thickness 1.50 mm (top and bottom rails and stiles) single/ double/ leaf side hung type including necessary jointing cleats/ aluminium fillets/ glazing clips with rubber gasket with aluminium fittings such as aluminium tower bolt 200mm long 03 Nos for each dor, aluminium bow handles 150 mm 'D' type 02 nos for each door, door shutter mounted on bottom double action floor spring hydrailically regulated made up of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing mild steel heavy duty and door shutter top mounted on aluminium alloy pivot -01 No on each shutter, bottom and floor stoppers, complete all as speified. Note : All fitting shall be of ISI marked except cleats) sizes of each door shall be as per site requirement all as directed and specified.

S&F venition blinds for aluminium windows/ doors of superior quality complete all as specified and as directed by Engr-in-Charge.

Taking down carefully point wiring copper/aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regtulators sockets etc tobe measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as specified and as directed.

M&L for point wring for one light/ceiling fan controlled by one switch with 1.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3 complete all as specified and directed. (a) One light point /bell point controlled by one switch

(b) All as per Si No 124 but for one 3/5 pin socket outlet, 5 Amp independent

(c ) All as per Si no 124 but for one socket outlet 3 Pin, 5 Amps, SP on same board.

M&L for point wiring with 1.5 Sq. mm PVC Insulated unsheathed FRLS multistranded copper conductor, medium grade ISI meraked drwan into and including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor wire drwan in to and including suraface PVC rigid non metalic conduit for one ceiling fan point controlled by one switch with and also including 1.5 sqmm continious earth wire connected to common earth dolly complete all as specified and directed by engineer incharge.

M&L for point wring for power point controlled by one switch with 2.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLSH in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 sqmm copper conductor cable FRLSH connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3 complete all as specified and directed.

All as per item No 124 above but for one light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement modular switch single pole one way 10Amps 1 module complete all as specified and directed

Supply and fixing inreplacement modular switch single pole one way 16 Amps 1 module complete all as specified and directed

S&F Modular switch Piano flush type single pole 5 Amps two way, all as specified and directed .

Supply and fixing in replacement modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing in replacement modular Bell push 6 amp 01 module complete all as specified and directed.

Supply and fixing in replacement modular socket 6 /16 Amps 2/3 pin flush type complete.

Supply and fixing in replacement of ceiling rose.3 face/PVC/polycarbonate,isolated body all as specified and directed.

Supply and fixing in replacement modular electronic fan regulator, step type, two module 60 watt 230 volt and making all necessary connections complete all as specified and directed.

S&F Bell ding dong AC 23Volts single pole all as complete all as specified and as directed by Engr-in-Charge.

Taking down existing serviceable tube light fittings any type any wattage and keep in safe custody for refixing the same after rewiring complete

Fixing only Slim linear LED lighting fixture 4/5W watt LED batten, with full base of extruded poly carbonate isolated driver, complete making all connection from ceiling rose to fittings including testing complete all as per the direction of Engr-in-Charge.

Fixing only decorative ultra slim linear Aluminium Extruded LED lighting fixture 10/12 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceilingrose to fitting complete all as per directed by Engr-in-charge.

Fixing only Slim linear LED lighting fixture 20 Watt LED batten, P.F greater than 0.9, input voltage range from 90 Volts to 280Volts with full base of polycarbonate extruded section acting as a heat sink with closed back isolated driver complete making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable with from ceiling rose to fitting complete all as specified and as directed by Engr-in-Charge.

Fixing only LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testingcomplete all as specified and as directed by Engr-in-Charge.

S&F LED light fitting PLUTO NEO PANEL 2'x2' PLR 36 watt LED 857S environmental friendly , new generation , aesthetically designed ,ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong /grid /ceiling all as spesified and directed.

S&F in replacement Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge.

S&F in replacement E-Lite LED Curve lighting fixture 10/12 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge.

S&F in replacement E-Lite LED Curve lighting fixture 05 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge.

S&F in replacement security (street) light fitting 25/35 watt, new generation energy saving & environmental friendly long life versatile pressure die cost aluminium IP 66 with acylic, powder coated, pressure die cast aluminium compact high power LED street light with heat resistant toughed glass, corrosion resistant, isolated driver, including provision of GI tubing bracket of suitable size and fixed on wall including clamps, nut, bolts and washer for fixing of security (street) light complete all as per direction of Engr-in-Charge.

M&L in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6 Sqmm PVC FRLS ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 6.00 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and as directed by Engr-in-Charge.

M&L for sub main wiring with 2 single core PVC insulated FRLS unsheathed stranded copper conductor cable of Size 4 Sqmm with and including PVC concealed conduit "ISI" marked with all fittings and accessories and one single core PVC insulated FRLS single core stranded copper conductor cable 4.0 sqmm as contineous earth wire and connected to earth dolly all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below Normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following:- complete all as specified and as directed by Engr-in-Charge. (a) Test point GI wire 4mm dia . (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

M & L for replacement of DB0Xx MCB protected socket with sheet steel enclosure complete WITH MCB SP 25 Amp complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 4mm dia GI wire as earth continuty conductor or main earth strip fix to wall on batten or recess or chess or burrid in ground or any other indicated situation for loop earthing complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Exhaust fans steel body,AC ingle phasee 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and as directed by Engr-in-Charge.

Supply and fix electric water heater, storage type steel body with stain less steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways.

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways.

S&F 'C' series SPN MCB 40 to 63Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc complete all as specified and as directed by Engr-in-Charge.

S&F 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc complete all as specified and as directed by Engr-in-Charge.

S & F sheet metal VTPN DBs - DPX3 160 MCCB DBs 04 way (DPX3 160+ 12) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge.Make Legrand Cat part No : 5077 50 or equivalent to Shnieder as per sample Approved by Accepting Officer

S&F in switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal.

S&F socket outlet 2 in 1, 3 pin, 5 Amp flush type universal.

S&F in switch 5 Amp flush type 230 Volts, AC complete.

S&F LED CLEAN ROOM BOTTOM OPENING MS FRAME 2X2 36 WATT IP65, dust free & zero maintanence LED clean room bottom opening luminaire fcilities, all as per the direction of Engr-in-Charge. Make Havells Cat No. BOCR2X2R36WLED857SPCSSGEN or equivalent makes in wipro/ Philips/ CG.

S&F Electric bell(Ding dong) AC 230/250 volts grade single pole ISI marked fixed in replacement, complete all as specified and as directed.

Supply and lay in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as directed by Engr-in-Charge.

Excavation in trenches in any type of soil n exc 1.5m deep and not exc 1.5m wide for laying of under ground cable, electric pole and getting out complete all as directed.

Returning filling in including spreading leveling watering and well ramming 25cm in thickness in any type of soil complete all as directed by Engr-in-Charge.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as directed by Engr-in-Charge.

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt complete all as directed by Engr-in-Charge.

M&L GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia complete all as directed by Engr-in-Charge.

M&L wiring for circuit / submain wiring in PVC surface conduit not less than 40 mm dia with 4 x 10sqmm main wire and 2 x 6 sqmm earth wire of FRLS, PVC insulated copper conductor, single core cable complete all as directed by Engineer-in-Charge.

M&L wiring for circuit / submain wiring in PVC surface conduit not less than 25 mm dia with 2 x 10sqmm main wire and 1 x 6 sqmm earth wire of FRLS, PVC insulated copper conductor, single core cable complete all as directed by Engineer-in-Charge.

S&F sheet metal TPN DBs - DPX3 60 MCCB DBs 4 way (DPX3 160+12) with metal door 415 volts grade IP 43 protection grade fixed flush to wall complete including connections should be provide with necessary reduce lugs all as specified and directed by Engr-in-Charge.

S&F and connecting with necessary copper lugd DPX3 thermal magnetic MCCB 4 pole 100 Amps 415 volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by engineer in charge for MCCB DB. Make Legrand, cat part No. 4200 15 or equivalent to shnieder.

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, Neutrallink, Earth bar and din rail suitable for use on 240V,complete all as directed by Engineer-in-Charge.

S&F Ekinorx3 Metra plug & socket DBs 20Amp FP MCB, arrangement suitable for flush mounting and surface mounting for protection of appliances with neutral link for mounting modular devices complete with MCB TPN 32Amp all as specified and directed by engineer in charge.

S&F single pole and neutral enclosure with a twopin and earth plug and socket complete with one single pole MCB of 20 Amp 240V Complete all as specified and as directed by engineer incharge.

M/S JANDIAL ENTERPRISES

HANS RAJ SHARMA

M/S BHARAT LIGHT ELECRIC.CO