MLA FUND 2025-2026-SOLAR LIGHT Roc.132/2025

Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO1461 with thickness of 65 Micron

Cost and Supply of UTL 335 (wp) Class A Solar Photovoltaic Modules / Panels - Crystalline Silicon Terrestrial UTLR Specifications Application class as per Cl. 3 of IS/IEC 61730-1 : 2004Class A PV Module rating (in Wp) 335 Efficiency for PV Modules>14% PV Module manufactured inINDIA BIS CRSas per IS:IS 14286 (for Crystalline Silicon Terrestrial Photovoltaic (PV) modules )

30 Watt White LED type (NES-LIFE-30-Semi integrated Solar LED Street light) Specifications Power output of PV Module≥ 75 Wp at 16.4 ±0.2 Volt at STC Battery capacity≥ 12.8 V (nominal), 30 Ah at STC (1 day autonomy) Type of LED (Light source)30 Watt White LED type Ingress protectionIP65 or better Indicators on the systemProvided with 2 LED indicators: a green light to indicate charging in progress and a red LED to indicate deep discharge condition of the battery. The green LED glow only when the battery is actually being charged. Battery box included in the luminaire enclosure, with water proof (IP65 or better) and corrosion resistant

Supply of PVC insulated and sheathed 3 core 6Square mm flat type copper cable conforming to IS 694/1990 including cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications.

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B

Plain cement cement 1:4:8 Mix using 40 mm ISS Gauge HBG Metal including cost and conveyance of all materials to the work site including all labour charges for mixing,laying,ramming,consolidation and curing etc., complete as per standard specifications.

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. as per TNDSS NO: 30&86

Cement concrete Using 1:2:4 mix ( One cement two sand and four aggregates) using 20 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications.as per TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII