SPL REP TO BLDG NO P-6/8 SINGLE OR LIVING ACCN OF DOU UNDER AGE B/R-II OF GE SATWARI

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

Demolition of brick tiles , built in mud mortar on roof and removing unserviceable material from work site to outside defence premises complete all as specified and directed

Dismantling wall and ceiling boards (fibre,pulp, insulation) or insulation boards/ slabs/ blankets, any thickness, including cover fillets etc complete all as specified & directed.

Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the rubbish from the work site to outside defence premises complete all as specified and directed.

Dismantiling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed

All as per Srl item No -08 here-in-before but except bricks complete all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface,surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over two coats of wall care putty 1 mm thick each and one coat of primer complete all as specified and directed.

M&L for preparation of new plastered/ concrete surfaces of walls and applying two coats of premium acrylic emulsion exterior paint, alkali & fungal resistance, dirt resistance of required shade over a coat of primer including 1 mm thick weather proof external putty 1 to 2 mm thick to make wall surface even and smooth complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls, pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coats of oil emulsion distemper over two coats of wall care putty 1 to 2 mm thick each on uneven surface (where ever required) complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

M&L for factory made box type steel windows, double shutter,outer frame made out ERW TUBE 'P section (60x35x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) openable shutters side hung including pintle hinges with two nos MS tower bolts 150mm size on each shutter, steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required .Steel windows will be double shutter (external glazed and internal wire gauzed) complete all as specified in Drg No CEPZ/C-TD/27/13 of sheet No 1/4 to 4/4 complete all as specified and directed. Note: - The quoted rate shall be deemed to include :- (i) Provn of one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS steel lugs of MS flat 20 x 5mm & 20 cm long over all welded to frames (iii) PCC block for embedding lugs. .(iv) Provn of 10 mm square bar as guard bar, spacing 100 mm c/c all as per drg and including 4 mm thick flat iron for fixing of guard bars all around .

S&F pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight of required nos and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight of required nos and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to distributed surface of walls complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed .

S&F 35 mm thick 2nd class hard wood , glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers size of members of shutters as specified in SSR Part-I Section-8 clause 8.24 (a) fitted to chowkats complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F galvanised mild steel wire cloth , 0.56 mm normal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 125mm long mild steel butt hinges, medium weight,fixed with screws complete all as specified and directed

S&F 100mm long stainless steel butt hinges, fixed with screws complete all as specified and directed

S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F aluminium anodised , fabricated type handle 100mm size complete all as spcified and directed.

S&F aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F aluminum hanging floor door stopper ,twin rubber of size 100mm, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws complete all as specified and directed

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with welding complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for 125mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, finishing surfaces even and fair complete all as specified and directed.

M&L for 50mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, finishing surfaces even and fair complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floor, laid, bedded and pointed in any mortar complete all as specified and directed,

M&L for glazed ceramic coloured digital tiles,300x450x7 to 8 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed.

M&L for 8 to 9 mm thick vitrified ceramic double charged, edge cut, joint free, coloured or printed any shade tiles (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 8 to 9 mm thick vitrified ceramic double charged, edge cut, joint free, coloured or printed any shade tiles (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , as in vertical surfaces such as skirting / dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 12 mm thick non skid dura stone coloured digital vitrified joint less tiles (heavy duty) matt finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed.

M&L for granite work (Z-black) 16 to 18 mm thick any colour (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinging and 'P' or 'S' trap complete all as specified and directed

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rest, cast iron 'P' or 'S' trap of size 100mm, including provision of plain cement concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good the floors complete all a specified and directed

S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float 32mm PVC 'L' bend and handle including brackets complete all as specified and directed

S&F in repair vitreous china counter wash basins, size 560x470x190mm, oval shape,white to be fixed on counter/ RCC slab including CP waste coupling & PVC waste pipe complete all as specified & directed.

S&F Vitreous china urinal of size 375x390x590mm, white including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe and chromium plated spreader including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore complete all as specified and directed.

S&F in repair bib tap with flange,long body, chromium plated, fancy type, cast copper alloy , screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair pillar taps, chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair angle valve with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed

S&F in repair chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Taking up or down 15mm dia GI tubing and conncetions including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 25mm dia GI tubing and conncetions including cleaning for refixing or removal to store complete all as specified and directed

M&L for dismantling of water tank of capacity exc 500 but n. exc 1000 ltrs and removing complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, triple layered, white hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall/ceiling or laid in floors complete all as specified and directed.

S&F Galvanised steel tubing, 25mm bore, medium grade with all fittings, fixed to wall/ceiling or laid in floors complete all as specified and directed.

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed.

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends complete all as specified and direced.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings and removing from site complete all as specified and directed

S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) bends any radius, 75 mm bore complete all as specified and directed

S&F UPVC (SWR) bends with access door any radius, 75 mm bore complete all as specified and directed

S&F UPVC (SWR) bends any radius, 110 mm bore complete all as specified and directed

S&F UPVC (SWR) bends with access door any radius, 110 mm bore complete all as specified and directed

S&F in repair UPVC (SWR) floor trap plain with grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed.

M&L for providing Reinforced cement concrete M-25 (design mix), (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams, columns,landings, balconies, canopies,deck slabs and in shelves and other similar works complete all as specified and directed and directed .

M&L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. and finishing surface rough complete all as specified and directed.

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia,in stirrups,spacers and binders including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for preparation of surface free from dirt , dust & washing with water and water proofing treatment to roof surface (in four coat) with fibre reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110 having minimum elongation of 350%, tensile strength 2.9 MPa and shall have rack bridging ability upto 2.55 mm and shall resist 10 bars of hydrostatic pressure reduce temperature upto 10 degree celcius to RCC roof slabs, roof treatment shall be carried out in four coats to newly plaster roof surface as per the procedure given below :- (a) Apply first coat of fibre reinforced elastometic liquid water proofing membrane as described above with 33% dilution as priming coat as directed and allow it to dry before next coating. (b) Laying second coat of fibre mesh 0.3 mm thickness weave in leno pattern having weight 45 gms per sqm and pasting it properly with overlap of 50 mm as directed and allow it to dry before next coating. (c) Apply third coat of fibre reinforced elastometric liquid water proofing membrane as described in para (a) above but undiluted @ 0.45 litre per sqm of roof surface as directed. (d) Apply fourth and final coat of fibre reinforced elastometric liquid water proofing membrane as described in para (a) above but undiluted @ 0.45 litre per sqm of roof surface as directed. (e) Work shall be carried out by the authorised applicator of manufacturer and contractor shall submit a triparty agreement MoU (between contractor ,said manufacturer and their authorities appicator ) on Non judicial stamp paper to GE and shall be approved by the GE before commecement of work at site.

M&L for 10mm thick rendering in cement mortar 1:4 on concrete surfaces as in roof, finished even & fair and including mixing of water proofing compound complete all as specified and directed . Note:-WPC shall be measured and paid separately

M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S&F in repair 15mm dia stop valve,fancy type, cast copper alloy ,chromium plated, concealed type with long shank and cup, screwed both ends for iron pipe complete all as specified and directed.

Demolition of cement concrete (un-reinforced) ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish from the work site to out side defence premises complete all as specified and directed

M&L for 75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, finishing surfaces even and fair complete all as specified and directed.

M&L for providing and laying 60 mm thick factory made charmfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in surface channel and drain including necessary form work complete all as specified and directed

M&L for plain cement concrete1:2:4, type B 1 (using 20mm graded crushed stone aggregates) as in walls or, retaining walls, any thickness, size or shape including pilasters, buttresses, columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed .

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed.

M&L for framed work such as grills , gratings etc with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters: walk ways , railings frame work of water tanks and similar work confirming to Fe290, Gde E-165 complete all as specified and directed

Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells etc & making good the disturbed surfaces of walls/ceiling, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.

Taking down of unserviceable MCB DB, SPN /TPN along with MCB's complete all as specified and directed

Taking down of unserviceable sub main wiring of any size complete all as specified and directed

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed medium grade conduit of suitable size with all accessories such as bend, reducers, MS hooks including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications.

All as per Srl item No 97. here-in-before but for one socket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed

All as per Srl item No.97 here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed

All as per Srl item No 97 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed

S&F modular type switch, one way 6 Amps , 1 module complete all as specifieds and directed .

S&F modular type socket 3 pin, 6 Amps, 2 module complete all as specifieds and directed .

S&F modular type switch, one way, 16 Amps, 1 module complete all as specifieds and directed .

S&F modular type socket 3 pin, 6 A/16 Amps, 2 module complete all as specifieds and directed .

S&F modular type fan regulator step down 120 watt, 2 module complete all as specified and directed .

S&F ceiling rose, surface backelite, two/ three terminal, 240 volts complete all as specifieds and directed .

S&F LED light fitting 1 x 18Watt, 220V, Integrated batten type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with all fixing arrengenment complete all as specified and directed.

S&F energy saving new generation 10W LED bulk head luminaire with opal diffuser, IP 65 and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 Hz complete all as specified and directed.

S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 230 Volts,8 ways with 100 amps rated copper bus bar complete all as specified and directed

S&F MCB SPN, 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .

S&F MCB Single pole, 6 to 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .

S&F Submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathed FRLSH copper wire 6 Sqmm for continous earth wire drawn into and including concealed PVC conduit of suitable size complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)

Taking down existing ceiling fan of any size/sweep including oiling, greasing, cleaning and applying two coats of synthetic enamel paint after preparation of surface and refixing the same complete all as specified and directed .

S&F factory made epoxy polyester powder coated distribution board TP&N ,4 ways (VTPN DB), double door,(concealed flush to wall) (IP-43 protection) fabricated from minimum 1.2 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 250 Amps bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with space for provision for 4 pole MCCB as incommer and outgoing MCBs as required at site and conforming to IS: 8623 along with cable end box including making good disturbed surface complete all as specified and directed. NOTE: (a) MCCBs and MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of BoQ..

S&F MCCB, 4 Pole,adjustable type ,415 V, 100 Amps with breaking capacity 16 KA including making good the disturbed surfaces complete all as specified and directed.

M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed ..

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 50 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil all as specified and directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm any type of soil complete all as specified

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M&L for factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

S&F Galvanised steeI tubing, light grade, 40mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed.

M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed.

J P TECHNO (BID ID -3407944)

M/S SHAKTI STEEL INDUSTRIES (BID ID -3419403)

CELMAC REGD (BID ID -3419437)

M/S Shesh Paul Gupta (BID ID -3413158)