REPAIR TO ROAD AND ROAD FURNITURE UNDER AGE BR II GURDASPUR

Amount

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/track coat with bituminous primer (VG-10) @ 5kg per 10 Sqm, laying bituminous premixed carpet, 30mm thick consolidated thicknessWITH 5.5% BINDER (BITUMIN VG-30) content of total mix rolled and compacted to required camber and gradient complete all as specified and directed.

Material and labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber with 8 to 12 tonne road roller(consolidated thickness 75mm or less) and binder content of 4.0% by weight of total mix complete all as specified and directed.

Repair to pot holes of any depth, not exc 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed carpet rolled rammed and sealed with premixed sand and seal coat bituminous macadam well rammed and sealed with binder @ 6.80 Kg of binder with 0.06 cum of sand and again well rammed to true surface (including supply of premix macadam binder and chipping to uniform surface) depth of pot holes n exc 30mm complete all as specified and directed.

Material and Labour for preparation of road surfaces and painting marking lines dashes, arrows, letters etc on road pavement and the like of any width with using thermoplastic compound white paint hot applied1.25 mm thick including glass with machine confirming to BS3262 and according to the specification laid down IRC & MORTH (Ministry of Surface Transport) specification 20011(5th revision) complete all as specified. Note:- Marking shall be carried out with thermostat machine

Supply and fixing for repair of road solar stud size 125x125x25mm made from aluminium alloy and PC construction, solar powered by monocrystel solar panel alongwith high capacity rechargable battery (led - 10mm, 3 pieces each side and total 6 pieces are used for high brightness) water proof confirming to IS-67-1977 having load capacity of 40 tonnes complete all as specified and directed. Make :- Dark Eye Cat Part No DA-110 or equivalent of Makes specified in list of Makes

S & F in repair ABS Plastic cat eye Dynamically design having high impact strengrth and fitted with two numbers reflector on both side SIZE 110X 110 X 20MM make (Dark eye , Greenlite)

RATTAN CHAND CHANDAN AND CO

JAI DURGA CONSTRUCTION CO

Standard engineers

RAM CHAND SAINI & BROS.

DEEPAK AND CO

AGGARWAL ASSOCIATES

M/s kulwant singh and sons

KULBHUSHAN AGGARWAL