PROVISION OF CERTAIN MINOR WORKS AT SQAE (A) AND CQA (W) AND SPECIAL REPAIR TO BLDG NO 131 STORE AND SEALED DRAWING SECTIONS AT CQA (W) JABALPUR WITH CERTAIN MINOR WORKS UNDER GE (I) (P) FYS JABALPUR

Amount

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof & north light covering/cladding to wall, fixed with self tapping screws including dismantling the existing asbestos sheet complete all as specified.

S&F Pre-painted plain galvalume aluminium zinc coating GI based corrugated steel sheet 0.60mm of an colour having tensile strength of 550Mpa as in roof & north light covering/cladding to wall, fixed with self tapping screws including dismantling the existing plain or corrugated steel sheeting of any guage complete all as specified.

Dismantling of timber scantling 40 sqcm and over in section, in any position.

Dismantling mild steel work of any description not otherwise provided for including removing the dismantlrd material off the site complete all as specified and directed.

S&F mild steel flat iron as in wind ties for roof including securing bolts including all necessary drilling, bolting or riveting etc, and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

All as per item No. 07 here-in-before but except mild steel flat iron all as specified and directed. (retrieved serviceable mild steel flat iron obtained from item No 4 to be used)

M&L roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets frameing (Beam, tee, angles, channel or flat sections) includingdistance pieces, cleats etc conforming to Fe- 290-W (grade E165) all as specified and directed.

S&F Rolled mild steel plates (Plain or chequered) channels square cut or notched (ordinary & counter sunk) forming holes, without any attachment conforming to Fe- 290-W (grade E165) all as specified and directed.

M&L for preparation of new steel surface of any description, n exc 10cm in width or girth priming with red oxide and applying synthetic enamel paint all as specified and directed.

Preparing new surfaces of steel any description, over 10cm in width or girth not other wise described on New or old previously untreated surfaces priming with red oxide and applying two coats of synthetic enamel paint all as specified and directed.

S&F 3 mm thick figured , pin headed and glazed with oil putty in squares not exceeding 0.5 Sqm in each pane as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides)and hanging: also fastening and fixing confirming to Fe-290(Grage 165) all as specified and directed.

M&L 1mm thick mild steel, plain, black sheet in wall clading, steel gates and similar work, cut to size, holes, punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including beinding or turning up , itred angles etc all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar complete all as specified and directed.

M&L Brick work with sub class 'B' Bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as directed and specified.

All as per item No. 15 here-in-before but except bricks complete all as specified and directed.

Taking down cement or cement lime plaster, any description onbricks or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding joists etc in wall, ceilings, stanchions, beams etc including all laps, cutting and waste complete all as specified and directed.

M&L rendering 15mm thick on brick masonry surfaces or surface other than fair face/lathingetc of brickwork in CM (1:4) finished even and smooth complete all as specified and directed.

M&L rendering 15mm thick on brick masonry on fair surfaces brickwork or on concrete surfaces finished even and smooth without using extra cement in CM 1:4 complete all as specified and directed.

M&L rendering 15mm thick on brick masonry on brick surfaces on fiar face of brick work in CM 1:6 complete all as specified and directed.

M&L preparation of new plaster surfaes of wall and applying two coat of plastic emulsion paint over a coat of 3mm thick birla white wall care putty coplete all as specified and directed.

M&L complete removal of existing treatment on wall and applying 3mm thick birla white wall care putty and treated wth surface with two coat of plastic emeulsion over a coat of primer complete all as specified and directed.

M&L preparation of new plaster surfaces of wall and applying two coat of weather proof acylic emulsion paint over a coat of 3mm thick birla white wall care putty complete all as specified and as directed.

Complete removal of existing teatment on wall and applying two coats of weather proof exterior emulsion over a coat of primer and applying 3mm thick birla white wall care putty complete all as specified and directed.

Dismantling of wall and ceiling boards(fibre, pulp, insulations, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets).

S&F as in repair for suspended fase ceiling system using chicago metallic (E grid) exposed suspended system of grid section size 600mm x 600mm comprising of GI powder coated main 39mmx24mmx0.80mm thick (thickness comprising of GI/0.40+PPPCGS/0.30mm) cross Tee 29mmx24mmx0.80thick and wall angle 22.2mmx22.2mmx0.065mm thick with and including 6mm thick HPSC (High pressure stem curedP preprimed self imposed fixtured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dasg fasteners from purlins of the roof with clips with provn ofllight fixture complete all as specified and as directed.

Demolition of cement concrete in ground floors & pavings in any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 25mm thick cement concrete type B-1 (1:2:4) using 20mm graded stonge agg as in floor sub base complete all as specifed and directed.

M&LPCC type B1(1:2:4) using 20mm graded stone agg as in copping, filling gaps between roof sheeting and wall etc complete all as specified and directed.

M&L PCC type C1(1:3:6) using 20mm graded stone aggregate as in floors plinth protection/path etc 75mm thick finished even and smooth w/o using extra cement and laid in alternate bays system each bays n.exc 2.5m in length joint shall be filled with mastic bituminous all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L non skid jointless Ceramic colour tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc 0.11sqm but nexc 0.18sqm in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match with and including screed bed in CM 1:6 15 mm thick complete all as specified and directed.

All as per item No. 35 here-in-before but in skirting/dado including 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed bas laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over a screed bed in CM 1:6 20 mm thick complete all as specified and directed.

Ditto all as per item No. 37 above but in skirting/daddo including 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L chequered cement concrete chequered tiles 30cmx30cmx25mm thick prepolished set jointed and pointed in neat cement slurry in floors with grey ceemnt and pigment over a screed bed in CM 1:6 15 mm thick complete all as specified and directed.

M&L cement concrete type B1(1:2:4) using 20mm graded stone aggregate as in roof kerbs rounded or chamfered on edges complete all as specified and directed.

M&L for cement concrete type B1(1:2:4) using 20mm graded stone aggregate as in surface channel and drains complete all as specified and directed.

M&L 75mm thick cement concret in type D2 (1:4:8) using 40mm graded agg as in floor sub base.

M&L 40mm thick cement concrete type B1 in 1:2:4 using 20mm graded stone aggregate as in floor finished even and smooth using extra cement complete all as specified and directed.

Taking Down shutter of any description exceeding 1 Sqm But n.exc 2.00 Sqm Each including all irn mongry.

S&F 40 mm thick Flush shutters, solid core construction, with block board core and paticle board, commercial type on both sides.

Preparation of old wooden surface and applying one coat of synthetic enamel paint exceeding ocer 10cm width or girth complete all as directed.

Taking down chowkat or frames w/o taking off shutter from the frame not exceeding 1.5 Sqm each.

Taking down chowkat or frames w/o taking off shutter from the frame not exceeding 1.5 Sqm each.

M&L small fittings such as brackets of any type , latch and hinges blocks, shaped door and window stops and the like, including all necessary labours article n.exc 200 cu cm each comcplete all as specified and directed.

S&F aluminium sliding window frame of section 100mmx45mm, aluminium section weighing 1.08kg/RM, aluminium sliding shutter of sectionof size 61.85x31.75mm , section wighing 0.55kg/RM with and including double track No 2 fully glazed using aluminium section, including 4mm thick plain glass fixed to full window frame and hoining cleats, glazing clips, rubber packing anodised alumiium snap beading and aluminium mongeries, aluminium silicone sealant, anodised aluminium fitting complete , flush type handle come lock each shutter screws, diamond shape of aluminium deco grill (size of pitch 75mmx75mm)etc including making good disturbed portion with PCC or plaster and painting the surface to match with existing surfaces complete all as specified and as directed.

M&L Steel work in tubular trussess in post including special shaped washer etc complete ERW or induction but welded tubes conforming to I.S.I 1161-1979 graded St-240 complete all as specified and directed.

S&F MS butt hinges of 100mm medium weight, cold roled as in repair complete all as specified and directed.

M&L mild steel barrel tower bolts , stove enamelled blcak, with bright bolt and fixed 300mm long complete all as specified and directed.

S&F Mild steel pressed handles, oval type stove enamelled black 150mm long complete all as specified and directed.

S&F Mild steel door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F floor door stopper of aluminium body two legged over all length of cover plate 140mm as in repair.

M&L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed.

M&L Preparation of new steel surfaces exceeding 10 cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide Complete all as specified and directed

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F 5 mm thick sheet glass ordinary quality alongwith EPDM rubber all around the glass edges exc 0.5 sqm in each pane and fixed into aluminium frame work complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including all fixing aluminium arrangments complete all as specified and directed

S&F health faucet with flexible connection 1.5 mtr long chromium plated complete all as specified and directed.

S&F Aluminium Deco Grill of heavy quality with complete fitting and fixture as (aluminium flats, cleats and fixing arrangement) complete all as specified and directed.

E/M Portion :- Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed. Note : Taking out light fittings will be measured & paid separately

Taking down submain wiring any type and any size and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed.

Taking down Main switch/DB of any type/size complete with all accessories all as directed.

Taking out light fittings any type keep in safe custody for reuse or remove from site all as directed.

Material and Labour for concealed Point wiring with 1100-volt grade FRLS PVC insulated-unsheathed 1.5 Sq mm stranded copper conductor cable (ISI marked), with continuous earth wire of 1.5 Sq mm stranded copper conductor cable (ISI marked) PVC insulated-unsheathed, drawn in & including non-metallic rigid PVC conduit medium grade with fittings (ISI marked) not less than 19 mm dia & included sunken pressed steel terminal boxes for housing/ fixing switches suitable for modular switches and modular cover plate complete for mounting switch/sockets, regulators etc for one light/fan/Exhaust fan/Call bell point controlled by one switch. NOTE:- (i) Cost for cutting chases and concealing the conduit pipe in existing wall is deemed to be included in the item rate quoted. (ii) Conduit will not be concealed in ceiling and fixed on ceiling surface only.

All as per item No. 66 here-in-before but one switch socket outlet point 05 Amps on independent board.

All as per item No. 66 here-in-before but one socket out let 5 amps point on same baord with other switches.

All as per item No. 66 here-in-before but with 2.5 Sq mm copper cable for 5/15 Amps switch socket complete all as directed.

Material and labour for sub main wiring with two single core 6 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked including 6 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in concealed complete all as specified and directed. Note:- Two runs of 6 sqmm copper conductor cable, one run of 6 sqmm copper conductor and one run of PVC conduit will be measured as one unit. (Cost for cutting chases and concealing the conduit pipe in existing wall is deemed to be included in the item rate quoted.)

All as per item No. 70 here-in-before but using 4 Sqmm (Nominal Area) 2 single core PVC insulated unsheathed cable with stranded copper conductor incl 1 run of 4 Sqmm size PVC cable stranded copper conductor as earth continuity wire and connected to earth dolly. Note:- 2 runs of 4 sqmm copper conductor cable, 1 run of 4 sqmm copper conductor and one run of PVC conduit will be measured as one unit. (Cost for cutting chases and concealing the conduit pipe in existing wall is deemed to be included in the item rate quoted.)

All as per item No. 70 here-in-before but using 2.5 Sqmm (Nominal Area) 2 single core PVC insulated unsheathed cable with stranded copper conductor incl 1 run of 2.5 Sqmm size PVC cable stranded copper conductor as earth continuity wire and connected to earth dolly. Note:- 2 runs of 2.5 sqmm copper conductor cable, 1 run of 2.5 sqmm copper conductor and one run of PVC conduit will be measured as one unit.

Supply and fixing Modular switch 6 Amps, 230 volts flush button single pole one way complete.

Supply and fixing Modular Socket, outlet 5 pin, 6 Amps complete all as directed.

Supply and fixing Modular Socket, 16 Amps - 6 pin complete all as directed.

Supply and fixing Modular Switch, 16 A amps one way complete all as directed.

Supply and fix ceiling rose, 3 terminals of 28x50mm, PVC/ poly carbonate, isolated body.

Supply and fixing Modular fan regulator 2 module stepped type 120W, 230 volts complete all as directed.

S&F sheet metal enclosure for DBs when MCCB to be used, 4 way TPN, double door type 415 volts with 200 amps rated busbar suitable for MCCB, 63 amps, 4 pole incomer complete all as specified and directed. Note :- MCCB & MCBs will be measured separately.

Supply & Fixing MCCB, 4 Pole, 63 Amps, 415 Volt, 25 KA including connecting up using suitable size of lugs complete all as directed.

Supply and fixing MCB DB SPN 8 way with 200 Amps rated bus bar 240 V double door when MCBs to used complete all as specified and directed.

S&F MCB Single Pole Neutral of capacity 6 to 32 Amps 10KA breaking capacity C series.

S&F MCB SP 6 to 32 Amps, 230 Volts (as ordered) 'C' Series breaking capacity 10 KA complete all as directed.

Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 70 sqmm x 3.5 core, 1100 Volts grade all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for laying of cable and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out complete all as specified.

Returning, filling in, trenches including spreading leveling, watering and well ramming in layers not exc 25 cm.

Removing excavated material to a distance not exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point.

M&L for cushioning for protection of cable using dry river sand, or 'M' sand free from particles all as specified and directed.

M&L for Protection to cable with one layer of new bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks.

Cutting the existing hard standing/road and making good after laying of cable/pipe with 100mm thick PCC 1:2:4 mix, type B-I including finishing to match existing surfaces complete all as directed.

M&L for boring of holes under road/pavement /hard standing by trenchless technology using ultrasound technic with neccessary machineries including inserting GI Pipe up to 80 mm bore all as directed. Note : GI Pipe will be measured separately.

S&F light grade galvanized iron pipe 80 mm bore confirming to IS 1239 and ISI marked with all fittings fixed on walls/poles/insertion into bore under road etc for protection of cable complete , including suitable clamps nuts & bolts all as specified. Make-Tata/Jindal/Prakash Surya

Supply and fix single pole and neutral with 2 pin earth plug and socket complete with one single pole MCB 16 Amps complete all as specified and directed.

Taking down carefully ceiling fan/exhaust fan any size/make with cable and all accessoreis remove from site to store for repair/overhaulling complete all as directed.

Maintenance and checking of Ceiling/Exhaust fans obtained against item no 31 herein before, any size/type/make, checking the serviceability of safety pins, clamps, rubber bushes, nuts, bolts, canopies and electric connections etc. Preparation of old painted surfacere and painting with two coats of synthetic enamel paint of approved shade, connecting/hanging where directed, reconnecting the electric cables and testing complete, all as directed.

M&L for fan down rod made out of 15 mm MS tubing med grade of length as ordered duly painted and hanging the same etc all as specified and directed.

Supply & hanging of ceiling fan , BEE 5 star (ES-50) rated high speed 1200 mm sweep complete with blades, downrods, and all accessories as required and provision of 3 core flexible copper conductor cable of suitable size and connecting up from existing ceiling rose to fan complete all as specified and directed. Note : Down rod will be measured and paid under item no. 33 herein before.

S&F LED tube lamp fitting of capacity not less than 20 watts, 230 volts, internal type with extruded aluminium batten, 4ft long suitable for surface mounting including making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable complete all as directed. Make : Philips cat no. BN021LED25S6500PSUGRS1 or Equivalent.

Supply and fixing LED street light fitting 40 watt complete with Pressure die cast aluminum housing enclosed with Heat resistant glass cover in frame complete with IP 66 protection and making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable including 40 mm bore GI pipe bracket 1.2 mtr length bend to shape, fixing on wall using nuts, bolts & clamps as required complete all as directed. Make Philips Cat no. BRP409LED040CWHOMRFGS1PSUGR or Equivalent.

S&F LED bulk head luminaire 1x 6 watt, 23 volts AC Lamp complete with fitting, connecting cable PVC insulated and PVC sheathed copper flxible cable of size 16/0.20 mm necessary fixing arrangment all as directed. Make : Philips cat no. WT202WLED6SCWPSUS2PC or Equivalent.

Supply and fixing LED light fitting 42W slim energy saving channel luminaries sirface/recess mouting LED ceiling light with extruded aluminium and milky and making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable with complete accessories all as directed. Make : Philips cat no RC380BLED42S6500G4L60W60PSUOD OR Equivalent.

Supply and fixing industrial batten suitable for suspended on surface with iron downrod of length up to 1.5 mtr mounting rail for TLED lamps suitable for 2 x 18 watts LED tubelight fitting 2 x LED tube, T8, 18W, 2100 luman output, with built in driver, reflector and polycarbonate body including connecting cable PVC insulated and PVC sheathed copper flxible cable of size 16/0.20 mm necessary fixing arrangment all as directed. Make - Philips Cat Part no TMC 501P2xT-LED22WP3242 for fittng and cat part no of LED tube MASLEDTUBE1200MM18W865T8-I 2100lm. Note :- For item no 35,36,37,38 & 39 (a) LED chip, driver and housing of the LED fitting shall be of same make. (b) LED fitting/Lamp shall be provided with LM79 & 80 test certificate and eye certification bilogically tested.

Fixing serviceable light fittings received against item no. 4 and making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable with complete accessories all as directed.

Supply & Fix onload changeover switch in sheet steel enclosure, front handle operation, fixed on wall using suitable nuts, bolts and washers etc, 4 pole, 100 Amp, 415 Volts, including making connections complete all as directed.

TRISHLA CONSTRUCTIONS

Rai Construction Co

M/S N K SONKAR

SR ASSOCIATES

M K ENTERPRISES