REPAIRS, RECANNING AND POLISHING OF WOODEN FURNITURE AT AIR FORCE STATION PATHANKOT, JANDWAL AND DALHOUSIE UNDER GE AIR FORCE PATHANKOT

Amount

ALMIRAH MESS UTENSILS : FD-93 :- Replacement of unserviceable aluminum handle with new aluminium handle of 100mm long ISI marked. complete all as specified by GE/Engr-in-charge

All as per item No 1.00 above but replacement of aluminum hasp and staple of 100mm long ISI marked complete all as specified by GE/Engr-in-charge.

All as per item No 1.00 above but replacement of unserviceable hinges with 50 mm long MS butt hinges medium grade ISI Marked complete all as specified by GE/Engr-in-charge.

All as per item No 1.00 above but replacement of unserviceable back of almirah mess utensil with 9 mm thick BWR plywood one side teak vaneer of suitable size complete as directed by GE/Eng-in-Charge.

All as per item No 1.00 above but aking out old unserviceable shutter of almirah utensil as existing complete all as specified and directed by GE/Engr-in-charge

All as per item No 1.00 above here-in-before but rreplacement of unserviceable Ball spring catch with magnetic catcher of superior quality all as specified and directed by GE/Engr-in-charge

All as per item No 1.00 above here-in-before but replacement of legs with new of suitable size 50mm x 50mm at top and 40mm x 40mm bottom all as specified and directed by GE/Engr-in-charge

All as per item No 1.00 above here-in-before but eplacement of shelves of suitable size made of 18mm thick both side prelaminated particle board exterior grade all as specified and directed by GE/Engr-in-charge

ALMIRAH LARGE SHELVES (W) : Replacement of front shutter of almirah large with shelves with new suitable size complete as existing as directed by GE/Eng-in-Charge

All as per item No 2.00 above but replacement of unserviceable planks of the shelf with a new plank of the shelf of suitable size as existing as directed by GE/Eng-in-Charge

All as per item No 2.00 above but but replacement of unserviceable butt hinges 75mm long with 75mm long butt hinges med grade ISI marked as directed by GE/Eng-in-Charge

All as per item No 2.00 above but replacement of hasp and staple of 100 mm with new chrome plated mild steel hasp and staple of 100 mm as directed by GE/Eng-in-Charge

All as per item No 2.00 above but replacement of unserviceable long front stiffner at the base of almirah of suitable size complete as directed by GE/Eng-in-Charge

All as per item No 2.00 above but replacement of unserviceable short stiffner at the base of almirah of suitable size as existing complete as directed by GE/Eng-in-Charge

ALMIRAH SMALL SHELVES (W) : Replacement of front shutter of almirah small with shelves with new suitable size complete as existing as directed by GE/Eng-in-Charge

All as per item No 3.00 above here-in-before but replacement of unserviceable planks of the shelf with a new plank of the shelf of suitable size as existing as directed by GE/Eng-in-Charge

All as per item No 3.00 above here-in-before but replacement of unserviceable butt hinges 50mm long with 50mm long MS butt hinges med grade ISI marked as directed by GE/Eng-in-Charge

All as per item No 3.00 above here-in-before but replacement of hasp and staple of 100 mm with new chrome plated mild steel hasp and staple of 100 mm as directed by GE/Eng-in-Charge

All as per item No 3.00 above here-in-before but replacement of unserviceable long front stiffner at the base of almirah of suitable size complete as directed by GE/Eng-in-Charge

All as per item No3.00 above here-in-before but replacement of unserviceable short stiffner at the base of almirah of suitable size complete as directed by GE/Eng-in-Charge

BENCH WORKSHOP (1800x900x760) FD-42, 43, 145, 301) : Replacement of unserviceable plank of the Table top without damaging the adjacent parts with a new plank of teakwood of suitable size complete as existing/specified and directed by GE/Eng-in-Charge

All as per item No 4.00 above but Replacement of unserviceable legs with new Ist class teak wood legs of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item 4.00 above but replacement of unserviceable long rail as psecified and directed by GE/Eng-in-Charge

All as per item No 4.00 above but replacement of short rail complete as specified and directed by GE/Eng-in-Charge

All as per item No 4.00 above but replacement of side stiffner of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 4.00 above but replacement of long stiffner of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 4.00 above here-in-before but replacement of long stiffner below the bottom of the table top of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 4.00 above here-in-before but replacement of hasp and staple of 100 mm with new chrome plated mild steel hasp and staple of 100 mm as directed by GE/Eng-in-Charge

All as per item No 4.00 above here-in-before but Replacement of unserviceable bottom of drawer made from 6mm plywood BWR of suitable size as existing/directed by GE/Eng-in-Charge.

All as per item No 4.00 above here-in-before but tightening of all parts/joints of Bench workshop with bamboo pins.

BENCH WORKSHOP OF VARIOUS SIZES/TYPE ( FD-42, 43, 145, 301) : Replacement of unserviceable plank of the Table top without damaging the adjacent parts with a new plank of teakwood of suitable size complete as existing/specified and directed by GE/Eng-in-Charge

All as per item No. 5.00 above but Replacement of unserviceable legs with new Ist class teak wood legs of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No. 5.00 above but replacement of unserviceable long rail as specified and directed by GE/Eng-in-Charge

All as per item No. 5.00 above but replacement of short rail complete as specified and directed by GE/Eng-in-Charge

All as per item No. 5.00 above but replacement of side stiffner of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No. 5.00 above but replacement of long stiffner of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No.5.00 above but replacement of long stiffner below the bottom of the table top of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No5.00 above here-in-before but tightening of all parts/joints of Bench workshop with bamboo pins.

BENCH WORKSHOP 7-10" x 3-4" with 3"thick top covered with hard board (TP) : Replacement of unserviceable plank of the Table top without damaging the adjacent parts with a new plank of teakwood of suitable size complete as existing/specified and directed by GE/Eng-in-Charge

All as per item No 6.00 above but Replacement of unserviceable legs with new Ist class teak wood legs of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 6.00 above but replacement of unserviceable long rail as specified and directed by GE/Eng-in-Charge

All as per item No 6.00 above but replacement of unservicable short rail complete as specified and directed by GE/Eng-in-Charge

All as per item No 6.00 above but replacement of unservicable side stiffner of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 6.00 above but replacement of unservicable long stiffner of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 6.00 above but replacement of long stiffner below the bottom of the table top of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 6.00 above but tightening of all parts/joints of Bench workshop with bamboo pins.

Bin Soiled Linen (Drawing No FD-244/15):- Taking out old unservicable back bin soiled linen side and supply & fixing new back made out of 4 mm thick teak vaneer plywood suitable size complete all including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No 7.00 above here-in-before but taking out old broken unserviceable stiffner/battens of bin solid and supply & fixing new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No 7.00 above here-in-before but taking out old broken unserviceable leg of bin solid and supply & fixing new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No 7.00 above here-in-before but removing all/broken plywood from the top of bin soiled linen with out damaging the frame and in lieu of providing/fixing 4 mm thick one side teak vaneer plywood including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No7.00 above here-in-before but removing all damaged or broken cane of bin solid linen and recaning with oval/half round cane of 2mm of superior quality made from virgin PVC, of the Bin Soiled linen in Godrej pattern as per drawing/as directed by GE/Engr-in-Charge.

All as per item No 7.00 above here-in-before but removing unservicable/damaged batten of the top/frame of bin solid linen and supply and fixing of batten of suitable size complete in all respect per drawing/as directed by GE/Engr-in-Charge.

All as per item No 7.00 above here-in-before but removing unservicable 75 mm butt hinges of bin solid linen and fixing of new MS butt hinges as existing/as directed by GE/Engr-in-Charge.

Bed Plywood Top ( FD-247, 246) : Removing old damaged/unserviceable head rest of bed plywood and supply & fixing new head rest (of suitable size and as existing) with 4.0 mm thick one side teak faced plywood including prepration of surface & applying high gloss french polish on newly fixed head rest so as to match the colour with existing surface complete all as specified and directed by GE/Engr-in-charge

All as per item No 8.00 above but unserviceable foot rest complete.

All as per item No 8.00 above but removing old damaged/unserviceable long rails of bed plywood top and supply and fixing new long rails made of Ist class hard wood (MP teak) minimum size 1920x100x35 mm and applying high gloss French polish on newly fixed long rails to match the colour with existing surface complete all as specified and directed by GE/Engr-in-charge

All as per item No 8.00 above but removing old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick BWR, ISI marked complete all as specified and directed GE/Engr-in-charge.

All as per item No 8.00 above but removing old damaged stiffner 40mmx60mm and supply and fixing new stiffner of teak wood Ist class suitable size as per drawing all as specified and directed by GE/Engr-in-charge

All as per item No 8.00 above but removing old damaged Leg and supply and fixing of new leg of length 660mm of section 60mm x 30mm from 400mm to 660mm and section 60 x60 at 400mm and 30 x30 at bottom of the leg of teak wood Ist class suitable size as per drawing all as specified and directed by GE/Engr-in-charge

All as per item No 8.00 above but removing old damaged leg at the foot and supply are fixing new leg of length 500 mm of section 60mm x30 mm from 500mm to 400mm and section 60x60 at 400mm and 30x30at bottom of the leg of teak wood Ist class suitable size as per drawing all as specified and directed by GE/Eng-in-Charge.

All as per item No8.00 above here-in-before but painting of the MNF set with two coats of synthetic enamel paint of superior quality of black colour after preparation of the surface of MNF set as specified and diected by GE/Engr-in-charge

All as per item No 8.00 above here-in-before but Supply and fixing of teak wooden corners of 50'x50'x40' size joining legs with top rails complete all as specified and directed by GE/Engr-in-charge

All as per item No8.00 above here-in-before but removing old damaged top/bottom batten of headrest /footrest of 22mm thick and supply and fixing new softwood batten of headrest /footrest of suitable size as existing all as specified and directed by GE/Engr-in-charge

All as per item No 8.00 above here-in-before but tightening of all parts/joints of whole bed plywood with bamboo pins.

BOARD SOFT WITH FRAME 6x4 (FD-99) : Removing the unservicable cloth Baize green from soft board and supply and fixing new cloth baize green of superior quality as existing as specified by GE/Engr-in-Charge.

All as per item No 9.00 above but removing the unservicable soft board and supply and fixing new soft board of superior quality as existing as specified by GE/Engr-in-Charge.

All as per item No 9.00 above but removing the unservicable/damaged/broken glass and supply and fixing new plain glass of superior quality as existing as specified by GE/Engr-in-Charge.

All as per item No 9.00 above but replacement of unservicable hasp and staple with a new hasp and staple of suitable size made of stainless steel as directed by GE/Eng-in-Charge

All as per item No 9.00 above but removing the unservicable/damaged/broken side rail of main frame and supply and fixing a new short rail of frame made from teakwood as existing as specified by GE/Engr-in-Charge.

All as per item No 9.00 above here-in-before but removing the unservicable/damaged/broken long rail of main frame and supply and fixing a new long rail of frame made from teakwood as existing as specified by GE/Engr-in-Charge.

All as per item No 9.00 above here-in-before but removing the unservicable/damaged/broken top/bottom rail of door frame and supply and fixing a new long rail of frame made from teakwood as existing as specified by GE/Engr-in-Charge.

All as per item No 9.00 above here-in-before but removing the unservicable/damaged/broken side rail of door frame and supply and fixing a new long rail of frame made from teakwood as existing as specified by GE/Engr-in-Charge.

BOARD SOFT WITH FRAME 8x4 (FD-99/TP) : Removing the unservicable cloth Baize green from soft board and supply and fixing new cloth blaize green of superior quality as existing as specified by GE/Engr-in-Charge.

All as per item No 10.00 above but removing the unservicable soft board and supply and fixing new soft board superior quality as existing as specified by GE/Engr-in-Charge.

All as per item No 10.00 above but removing the unservicable/ damaged/ broken glass and supply and fixing new plain glass of superior quality as existing as specified by GE/Engr-in-Charge.

All as per item No 10.00 above but replacement of unservicable hasp and staple with a new hasp and staple of suitable size made of stainless steel as directed by GE/Eng-in-Charge

All as per item No 10.00 above but removing the unservicable/damaged/broken short rail of mainframe and supply and fixing a new short rail of mainframe made from teakwood as existing as specified by GE/Engr-in-Charge.

All as per item No 10.00 above but removing the unservicable/ damaged/ broken long rail of mainframe and supply and fixing a new long rail of mainframe made from teakwood as existing as specified by GE/Engr-in-Charge.

All as per item No 10.00 above butremoving the unservicable/ damaged/broken top /bottom rail of frame of the door and supply and fixing a new top rail of frame of the door made from teakwood as existing as specified by GE/Engr-in-Charge.

All as per item No 10.00 above but removing the unservicable/damaged/broken side rail of frame of the door and supply and fixing a new side rail of frame of the door made from teakwood as existing as specified by GE/Engr-in-Charge.

BOOK CASE SECTIONAL: Removing the unservicable /damaged /broken long rail of base and supply and fixing a new long rail of base made from teakwood as existing as specified by GE/Engr-in-Charge.

All as per item No 11.00 above but Removing the unservicable /damaged /broken short rail of base and supply and fixing a new short rail of base made from teakwood as existing as specified by GE/Engr-in-Charge.

All as per item No 11.00 above but Removing the unservicable/ damaged/ broken glass and supply and fixing a new glass as existing/as specified by GE/Engr-in-Charge.

All as per item No 11.00 above but Removing the unservicable/damaged/broken handle and supply and fixing a new handle as existing as specified by GE/Engr-in-Charge.

All as per item No 11.00 but Removing the unservicable/damaged/broken door and supply and fixing a new door made from teakwood as existing as specified by GE/Engr-in-Charge.

CHAIR DINNING LONG BACK FD-357/Chair dinning cuhioned : Replacement of unserviceable tapestry cloth of back and seat both, of chair dinning with new tapestry cloth with minimum rate not less than Rs 250 per Sqm as approved by GE/Eng-in-Charge.

All as per item No 12.00 above but replacement of cushion 32 density of 50mm thickness superior quality of suitable size of seat and back made to size all as specified and directed by GE/Engr-in-charge

All as per item No 12.00 above here-in-before but replacement of unserviceable front legs complete all as specified and directed GE/Engr-in-charge

All as per item No 12.00 above here-in-before but replacement of rear legs of suitable size complete all as specified and directed by GE/Engr-in-charge

All as per item No 12.00 above here-in-before but replacement of side rails with of teak wood 40mmx20mm made to size as existing all as specified and directed by GE/Engr-in-charge

All as per item No 12.00 above here-in-before but replacement of side/centre stiffner all as specified and directed by GE/Engr-in-charge

All as per item No 12.00 above here-in-before but replacement of Back/Front rail of seat with new teak wood rail of complete all as specified and directed by GE/Engr-in-charge

All as per item No 12.00 above here-in-before but replacement of batten of the back of the chair with new teak wood batten of the back complete all as existing/specified and directed by GE/Engr-in-charge

All as per item No 12.00 above here-in-before but replacement of Batten of the seat with new teak wood batten 70mmx10mm all as specified and directed by GE/Engr-in-charge

All as per item No 12.00 above here-in-before but Tightening of all parts/joints of whole chair dinning long back with bamboo pins/as directed by GE/Engr-in-Charge.

CHAIR EASY WITH CUSHIONED : Replacement of unserviceable tapestry cloth with new tapestry cloth of shade and seat, arms and back with minimum rate not less than Rs 250 per Sqm as approved by GE as directed by Eng-in-Charge

All as per item No 13.00 above but treplacement of unserviceable foam of seat with new foam of 75mm thickness 32 density duly upholstered as directed by GE/Eng-in-Charge.

All as per item No 13.00 above here-in-before but replacement of unserviceable foam of back with new foam of 50mm thickness 32 density duly upholsteredas as directed by GE/Eng-in-Charge.

All as per item No 13.00 above here-in-before but replacement of arm with new teak wood arm of 65x25mm of suitable size/as existing complete as directed by GE/Eng-in-Charge

All as per item No 13.00 above here-in-before but replacement of unserviceable front legs as directed by GE/Eng-in-Charge

All as per item No 13.00 above but replacement of unserviceable rear legs as directed by GE/Eng-in-Charge

All as per item No 13.00 above here-in-before but replacement of plywood seat with 6mm thick commercial plywood as directed by GE/Eng-in-Charge

All as per item No 13.00 above here-in-before but replacement of side/centre stiffner all as specified and directed by GE/Engr-in-charge

All as per item No 13.00 above here-in-before but replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as dircted by GE/Engr-in-charge

All as per item No 13.00 above here-in-before but Tightening of all parts/joints of chair easy cushioned with bamboo pins.

Chair Dinning (Drawing Nos FD-16, 279, 228): Taking out old broken unserviceable front leg of chair dining and supply & fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as specified and directed by GE/Engr-in-charge

All as per item No 14.00 above but rear legs complete as existing.

All as per item No 14.00 above but side rails complete as existing.

All as per item No 14.00 above here-in-before but rear rails complete as existing.

All as per item No 14.00 above here-in-before but front rails complete as existing.

All as per item No 14.00 above here-in-before but side stiffeners complete as existing.

All as per item No 14.00 above here-in-before but center stiffeners complete as existing.

All as per item No 14.00 above here-in-before but Back Rest complete as existing.

All as per item No 14.00 above here-in-before but Removing old damaged canning chair dinning, supply & re-canning with white virgin plastic cane 2.0 mm wide, oval shape (half round) as per Godrej pattern complete all as specified.

All as per item No 14.00 above here-in-before but Tightening of all parts/joints of whole chair dinning with bamboo pins.

All as per item No 14.00 above here-in-before but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as dircted by GE/Engr-in-charge

Chair writing (Drawing No FD-250, 280) :- Taking out old broken unserviceable front leg of chair writing and supply and fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including prepration of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete.

All as per item No 15.00 above but rear legs complete as existing.

All as per item No 15.00 above but side rails complete as existing.

All as per item No 15.00 above but rear rails complete as existing.

All as per item No 15.00 above but Front rails complete as existing.

All as per item No 15.00 above but side stiffeners complete as existing.

All as per item No 15.00 above but centre stiffeners complete as existing.

All as per item No 15.00 above here-in-before but Back Rest complete as existing.

All as per item No 15.00 above here-in-before but arm complete as existing.

All as per item No 15.00 above here-in-before but Removing old canning from existing chair writing and supply & re-canning with white virgin plastic cane 2 mm wide, oval shape (half round) as per Godrej pattern complete all as specified.

All as per item No 15.00 above here-in-before but Tightening of all parts/joints of whole chair writing with bamboo pins.

All as per item No 15.00 above here-in-before but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by GE/Engr-in-charge

Chair Wooden Bottom (Drawing No FD- 56, 225, 285): Taking out old broken u/s front leg and of chair with back without arm and supply & fixing new front leg of suitable size, made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete all as specified and directed by GE/Engr-in-charge

All as per item No 16.00 above but rear leg complete as existing.

All as per item No 16.00 above but side rails complete as existing.

All as per item No 16.00 above but rear rail complete as existing..

All as per item No 16.00 above but front rail complete as existing.

All as per item No 16.00 above but side stiffeners complete as existing.

All as per item No 16.00 above but centre stiffeners complete as existing.

All as per item No 16.00 above but broken seat complete and supply & fixing new suitable seat of 6 mm thick BWR grade plywood with perforations complete specified and directed by GE/Engr-in-charge

All as per item No 16.00 above but back rest complete.

All as per item No 16.00 above here-in-before but Tightening of all parts/joints of whole chair wooden bottom with bamboo pins.

All as per item No 16.00 above here-in-before but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by GE/Engr-in-charge

Chair Easy (Drawing No FD-229):- Taking out old broken unserviceable front leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete specified and directed by GE/Engr-in-charge

All as per item No 17.00 above but rear leg complete as existing.

All as per item No 17.00 above but front rail of seat complete as existing.

All as per item No 17.00 above but rear rail of seat complete as existing.

All as per item No17.00 above but side rail of seat complete as existing.

All as per item No 17.00 above but top rail of back complete as existing.

All as per item No 17.00 above but bottom rail of back complete as existing.

All as per item No 17.00above but side rail of back complete as existing.

All as per item No 17.00 above but arm complete as existing.

All as per item No17.00 above but Removing old canning from existing chair easy and supply & re-canning with white virgin plastic cane 2 mm wide, oval shape (half round) as per Godrej pattern complete all as specified.

All as per item No 17.00 above but Tightening of all parts/joints of whole chair writing with bamboo pins.

All as per item No 17.00 above here-in-before but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by GE/Engr-in-charge

HAT STAND FD-46, 363, 364: Replacement of unserviceable mirror of hat stand without damaging the adjacent parts with new mirror 5mm thickness 300mm x 460mm complete including fixing of teakwood beading as existing/specified of quality approved by GE and as directed by Eng-in-Charge

All as per item 18.00 above but replacement of unserviceable pegs of hat stand with new peg so as to match the existing peg of quality approved by GE as directed by Eng-in-Charge

All as per item 18.00 above but replacement of teak wood beading 6mm x 35mm edges round all round well chamfered complete as specified and directed by Eng-in-Charge

All as per item 18.00 above but replacement of unserviceable metal key plates of suitable size as specified and directed by GE/Eng-in-Charge

Locker for flying kit wooden : Taking out old unserviceable a panel shutter of Locker flyingkit and providing a new spanel shutter right or left or both side as required, including mild steel cold rolled "medium grade" 50 mm size ISI marked butt hinges duly screwed complete all as existing/specified and directed by GE/Engr-in-charge

All as per item No 19.00 above but providing 6mm thick BWR ply wood, on back side of lockers, fixed with wood screws complete.

All as per item No 19.00 above emoving existing unserviceable stiffener (Long/Short) and providing new teak wood stiffener of suitable size complete as existing

All as per item No 19.00 above here-in-before but removing existing unserviceable legs and providing new teak wood legs 50x50 mm at top and 40x40 mm at bottom complete

All as per item No 19.00 above here-in-before but replacement of plank of shelf with a new shelf made to sizeas existing/directed and specified by GE/Engr-in-charge

All as per item No 19.00 above here-in-before but replacement of unservicable aluminium handle of 100mm with a new handle as approved by GE/Engr-in-charge

Locker Bed Side (Drawing No FD-54 M, FD-222) : Taking out old unserviceable panel shutter of locker bed side and providing panel shutter right or left or both side as required, made to shape and size as existing/complete in all as specified and directed by GE/Engr-in-charge

All as per item No 20.00 above but providing 6mm thick BWR ply wood, on back side of lockers, fixed with wood screws complete.

All as per item No 20.00 above but providing hasp and staple of size 75mm of aluminum to be fixed with screws complete.

All as per item No 20.00 above but providing 19 mm dia conduit pipe with socket as shown in drawing

All as per item No 20.00 above removing existing unserviceable front stiffener and providing new teak wood stiffener 40 x 25 mm size complete

All as per item No20.00 above but removing existing unserviceable legs and providing new teak wood legs 50x50 mm at top and 40x40 mm at bottom complete

All as per item No 20.00 above but replacement of shelf of 18mm thick prelaminated particle board exterior grade of teak wood shade made to size as directed and specified by GE/Engr-in-charge

All as per item No20.00 above but providing aluminium handle of 100mm (ISI marked) as approved by GE/Engr-in-charge

RACK FOR RECORDS 6x2x6 /RACK STATIONARY Removing the unservicable/damaged/broken Leg of Rack for record and supply and fixing a new Leg of Rack for record made from teakwood as existing as specified by GE/Engr-in-charge

All as per item No 21.00 above here-in-before but replacement of unserviceable long rail as existing/specified and directed by GE/Eng-in-Charge

All as per item No 21.00 above here-in-before but replacement of unserviceable short rail as existing/specified and directed by GE/Eng-in-Charge

All as per item No 21.00 above here-in-before but replacement of unserviceable planks of the shelf as existing /specified and directed by GE/Eng-in-Charge

All as per item No 21.00 above here-in-before but Tightening of all parts/joints of rack record with bamboo pins alongwith supply and fixing of suitable corners as specified and directed by GE/Eng-in-Charge

SIDE BOARD (Drawing No FD- 26, 241, 371, 372):- Taking out old broken unserviceable leg of side board and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surfaces complete all as specified.

All as per item No 22.00 above but front and rear long stiffener complete

All as per item No 22.00 above but side stiffener complete

All as per item No 22.00 above but taking out old unserviceable back ply of side board and supply & fixing new back made out of 6 mm thick BWR grade ply wood of suitable size complete

All as per item No 22.00 above but taking out broken/unserviceable top/bottom of side board and in lieu of supply & fixing new top of side board suitable size, made of 18 mm thick pre-laminated particle board and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high class french polish complete

All as per item No 22.00 above but shutter complete as directed by GE/Engr-in-charge

All as per item No 22.00 above here-in-before but replacement of old unserviceable knobs and supply and fixing by aluminium anodised knobs with machine screw and washers of approved quality by GE/Engr-in-charge

All as per item No 22.00 above here-in-before but by replacement of unserviceable lock with new brass lock 50 mm isi marked

All as per item No 22.00 above here-in-before but replacement of unserviceable 75mm butt hinges with new 75mm MS medium grade as existing butt hinges ISI marked

All as per item No 22.00 above here-in-before but replacement of old unserviceable Ball catch spring supply and fixing magnetic catcher of approved quality by, GE/Engr-in-charge

All as per item No 22.00 above here-in-before but sides complete

Sofa Set 5 Seater (Drawing No FD- 373, 281,258):- Taking out old Unservicable arm of sofa set 5 seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete.

All as per item No 23.00 above but broken front/rear leg complete.

All as per item No 23.00 above but broken long rail of three seater complete.

All as per item No 23.00 above but broken side/front rail of seat complete.

All as per item No 23.00 above but broken side/top/bottom rail of back complete.

All as per item No 23.00 above but unservicable wooden bearers of seat/back complete.

All as per item No23.00 above but unservicable wooden rail long 30mm x 50mm between back legs to support back frame complete as directed by GE/E-in-Charge

All as per item No 23.00 above here-in-before but removing old unserviceable ‘U’ foam along with tapestry cloth of existing sofa set and supply & providing new 100 mm thick ‘U’ foam, 40 density, size 530 x 560 mm with tapestry cloth of approved quality minimium rate not less than Rs 250 per square meter complete.

SAFE MEAT FD-47, 369 : Replacement of unserviceable wire mesh from the safe meat and supply and fixing of wire gauage 12 mesh 20 gauge of superior quality approved by GE from all sides as existing /directed by GE/Engr-in-charge

All as per item 24.00 above but replacement of legs of with new of suitable size are as existing as directed by GE/Eng-in-Charge

All as per item 24.00 above but replacement of unserviceable aluminum hasp and staple size 75mm directed by GE/Eng-in-Charge

All as per item 24.00 above but replacement of aluminum handle 100mm directed by GE/Eng-in-Charge

All as per item 24.00 above but replacement of unserviceable bottom long rail of 50mm x 19mm of teak wood complete as directed by GE/Eng-in-Charge

All as per item 24.00 above but top rails complete directed by GE/Eng-in-Charge

As per item 24.00 above but replacement of 19mm thick teak wood planks not less than 10 inches in width of suitable size at the back as per requirement as directed by GE/Eng-in-Charge

All as per item 24.00 above but replacement of teak wood plank 19mm thick of suitable size at the bottom as directed by GE/Eng-in-Charge

All as per item 24.00 above but painting two coat of white synthetic paint superior quality over a coat of preimer to all wooden surface with spray machine as per standard workmanship as directed by GE/Eng-in-Charge

As per item 24.00 above but replacement ofunservicable top safe meat and milk of suitable size as existing/with marble of thickness of 25 mm with edges well smothened as directed by GE/Eng-in-Charge

Sofa Set 4 Seater (FD-258/281/373):- Taking out old Unservicable arm of sofa chair of set 4 seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete.

All as per item No 25.00 above but broken front/rear leg complete.

All as per item No 25.00 above but broken front/side rail of the seat complete.

All as per item No 25.00 above but unservicable wooden bearers of seat or back complete.

All as per item No 25.00 above but broken side/top/bottom rail of the back complete.

All as per item No 25.00 above but unservicable wooden 30mm x 50mm between back legs to support back frame complete as directed by GE/Engr-in-charge

All as per item No 25.00 above but removing old unserviceable ‘U’ foam along with tapestry cloth of existing sofa set and supply & providing new 100 mm thick ‘U’ foam, 40 density, size 530 x 560 mm with cloth of approved quality minimium rate not less than Rs 250 per square meter complete.

STOOL DRESSING Ladies (FD 252, 282) :- Taking out old broken unserviceable any leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete specified and directed by GE/Engr-in-charge

All as per item No 26.00 above but front rail of seat complete.

All as per item No 26.00 above but side rail of seat complete.

All as per item No 26.00 above but side/central stiffner of seat complete.

All as per item No 26.00 above but here-in-before Removing old canning from existing stool dressing ladies and supply & re-canning with white virgin plastic cane 2 mm wide, oval shape (half round) as per Godrej pattern complete all as specified.

Table Peg (Drawing No FD- 25, 236, 227,384 ):- Taking out old broken unserviceable leg of table peg and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by GE/Engr-in-charge

All as per item No 27.00 above but taking out broken/un-serviceable top of table peg and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 27.00 above but top rail complete.

All as per item No 27.00 above but bottom rail complete.

All as per item No 27.00 above but Replacement of old unserviceable PVC Buffers/Rings and supply and fixing by screw PVC buffers/rings of suitable size as directed by GE/E-in-Charge

Table Centre ( FD-29, 274, 235): Taking out old broken unserviceable leg of table centre and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing polished surface complete all as specified by GE/Engr-in-charge

All as per item No 28.00 above here-in-before but taking out broken/un-serviceable top of table centre and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 28.00 above here-in-brfore but rbroken long rail complete.

All as per item No 28.00 above here-in-brfore but short rail complete.

All as per item No 28.00 above but broken side stiffener complete.

All as per item No 28.00 above here-in-brfore but replacement of center stiffner 20 mm x50 mm joining the two long rails by dovetailed joint as directed by GE/Engr-in-charge

All as per item No 28.00 above here-in-brfore but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by GE/ Engr-in-Charge.

Teapoy ( FD- 64, 232, 278) : Taking out old unserviceable leg of teapoy and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed to match the colour with existing polished surface complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No. 29.00 above here-in-brfore but taking out broken/un-serviceable top of teapoy and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 29.00 above here-in-brfore but unserviceable top front/side rail.

All as per item No.29.00 above here-in-brfore but unserviceable bottom stiffner.

All as per item No.29.00 above here-in-brfore but replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by GE/ Engr-in-Charge.

Table Dining 6 Person ( FD- 30, 239, 273, 376):- Taking out old unserviceable leg of table dining and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size as existing including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 30.00 above but unserviceable long rail of suitable size complete as exisitng.

All as per item No 30.00 above but unserviceable short rail of suitable size complete as exisitng.

All as per item No 30.00 above but taking out broken/un-serviceable top of table dining and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 30.00 above here-in-brfore but unserviceable 100mm x 25mm stiffners below the top and supply and fixing the new stiffner of suitable size in dovetailed joint between long rails size complete as directed by GE/Engineer-in-charge.

All as per item No 30.00 above but unserviceable 25mm x 30mm stopper below the top and supply and fixing the new stopper of suitable size between long rails of size as exisiting complete as directed by GE/Engineer-in-charge.

All as per item No 30.00 above here-in-brfore but Supply and fixing of teak wooden corners of 50'x50'x40' size joining legs with top rails complete all as specified and directed by GE/E-in-Charge.

All as per item No 30.00 above here-in-brfore but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 20mm height as directed by GE/E-in-Charge

Table Dining 8 Person ( FD- 30, 239,269, 273, 376):- Taking out old unserviceable leg of table dining and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 31.00 above but unserviceable long rail of suitable size complete.

All as per item No 31.00 above but unserviceable short rail of suitable size complete.

All as per item No 31.00 above but taking out broken/un-serviceable top of table dining and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 31.00 above here-in-brfore but unserviceable 100mm x 25mm stiffners below the top and supply and fixing the new stiffner of suitable size in dovetailed joint between long rails size complete as directed by GE/Engineer-in-charge.

All as per item No 31.00 above here-in-brfore but unserviceable 25mm x 30mm stopper below the top and supply and fixing the new stopper of suitable size between long rails of size as exisiting complete as directed by GE/Engineer-in-charge.

Supply and fixing of teak wooden corners of 50'x50'x40' size joining legs with top rails complete all as specified and directed by GE/ Engr-in-Charge.

Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 20mm height as directed by GE/ Engr-in-Charge.

Table 3' X 2' with Drawer ( FD- 283, 224): Replacement of leg of table 3’X2’ with drawer and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 32.00 above but unserviceable long rail complete as existing

All as per item No 32.00 above but unserviceable short rail complete as existing

All as per item No 32.00 above but unserviceable side bottom stiffnercomplete

All as per item No 32.00 above but unserviceable Central stifnner complete

All as per item No 32.00 above but unserviceable bottom of drawer with 6mm plywood BWR of suitable size complete.

All as per item No 32.00 above but unserviceable side of drawer with new side of suitable size complete.

All as per item No 32.00 above here-in-brfore but replacement of front of drawer of suitable size with 18mm thick prelaminated particle board exterior grade teak wood shade complete with knob duly fixed complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 32.00 above here-in-brfore but replacement of drawers made to size as per drawing complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 32.00 above here-in-brfore but taking out broken/un-serviceable top of table 3x2 and supply & fixing new top of suitable size, made of 18 mm thick MDF board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 32.00 above here-in-brfore but replacement of 25mm x 25mm section track rail with grooves of 12mm x12mm in section complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 32.00 above here-in-brfore but replacement of knob per existing complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 32.00 above here-in-brfore but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 25mm height as directed by GE/ Engr-in-Charge.

Table 3' X 2' without Drawer (Drawing No FD- 284, 223): Taking out old unserviceable leg of table 3’X2’ without drawer and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 33.00 above but unserviceable long rail complete.

All as per item No 33.00 above here-in-brfore but unserviceable short rail complete.

All as per item No 33.00 above here-in-brfore but unserviceable central stiffner complete.

All as per item No 33.00 above here-in-brfore but unserviceable short stiffner complete.

All as per item No 33.00 above here-in-brfore but raking out broken/un-serviceable top of table 3x2 without drawer and supply & fixing new top of suitable size, made of 18 mm thick MDF board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 33.00 above here-in-brfore but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 25mmx15mm height as directed by GE/ Engr-in-Charge.

Table Dressing Ladies (Drawing No FD- 32, 251,378): Taking down old unserviceable looking mirror of table dressing ladies and S&F new looking mirror 5 mm thick of suitable size with edges well smothened complete all as specified.

All as per item No 34.00 above but Replacement of unserviceable bottom of drawer made from 6mm plywood BWR of suitable size as per drawing.

All as per item No 34.00 above but Replacement of unserviceable sliding glass shutter with new sliding glass shutter complete with edges smooth round moulded of 5mm thickness of suitable size as per drawing.

All as per item No 34.00 above but Replacement of old and unserviceable bottom side of dressing table with 18mm thick prelaminated particle board exterior grade of suitable size with 4mm x 18mm beading on all size as specified and directed by GE/ Engr-in-Charge.

All as per item No 34.00 above here-in-brfore but Replacement of old and unserviceable front of drawers of dressing table with 18mm thick prelaminated particle board exterior grade of suitable size including knobs as specified and directed by GE/ Engr-in-Charge.

All as per item No 34.00 above here-in-brfore but Replacement of old and unserviceable bottom of drawers of dressing table with 6 mm thick BWR plywood as specified and directed by GE/ Engr-in-Charge.

All as per item No 34.00 above here-in-brfore but Replacement of old and unserviceable sides of drawers of dressing table with 12 mm thick plywood BWR as specified and directed by GE/E-in-Charge.

All as per item No 34.00 above here-in-brfore but Replacement of old and unserviceable knob of dressing table knobs as specified and directed by GE/E-in-Charge.

All as per item No 34.00 above here-in-brfore but Replacement of old unserviceable of aluminium channel with new aluminium channel of suitable size and shape duly fixed complete as specified and directed by GE/E-in-Charge.

All as per item No 34.00 above here-in-brfore but Replacement of old and unserviceable 6mm thick ply at the back of the mirror of dressing table with 6mm thick ply BWR suitable size fixed with screws as specified and directed by GE/E-in-Charge.

All as per item No 34.00 above here-in-brfore but rReplacement of old and unserviceable back of box of dressing table ladies with 12 mm thick plywood BWR as specified and directed by GE/E-in-Charge.

All as per item No 34.00 above here-in-brfore but Replacement of old and unserviceable teakwood vertical at back of box of dressing table ladies with new teakwood vertical as exixsting/specified and directed by GE/E-in-Charge.

Table Dressing Gents (Drawing No FD-31, 230, 278, DB- 3980) :- Taking down unservicable looking mirror of table dressing gents and S&F new looking mirror 5mm thick of suitable size complete all as specified.

All as per item No 35.00 above here-in-brfore but taking out un-serviceable side of looking mirror gents(box) and S&F new side of suitable size made of 18 mm thick pre-laminated particle board, exterior grade of suitable size, one side with approved shade complete all as specified.

All as per item No 35.00 above here-in-brfore but taking out un-serviceable top/bottom of looking mirror gents(box) and S&F new side of suitable size made of 18 mm thick pre-laminated particle board, exterior grade of suitable size, one side with approved shade complete all as specified.

All as per item No 35.00 above here-in-brfore but supply and fixing of knob as approved by GE/Eng-in-Charge

All as per item No 35.00 above here-in-brfore but replacement of front of drawer with 18mm thick prelaminated particle board of teak wood shade alongwith konb as directed by GE/Eng-in-Charge.

All as per item No 35.00 above here-in-brfore but replacement of bottom of drawer of table dressing gents with 6mm thick plywood as directed by GE/Eng-in-Charge.

All as per item No 35.00 above here-in-brfore but Alignment and refixing /Tightening of all parts/joints of table dressing gents.

All as per item No 35.00 above here-in-brfore but Replacement of old and unserviceable teakwood vertical battens at back of box of dressing table gents with new teakwood vertical as exixsting/specified and directed by GE/E-in-Charge.

All as per item No 35.00 above here-in-brfore but Replacement of old and unserviceable key plate at back of box of dressing table gents with new key plate as existing/specified and directed by GE/E-in-Charge. Further four numbers of L clamps be fixed on the internal joints of back and sides to give more strength to the box

All as per item No 35.00 above here-in-brfore but unservicable back of box of suitable size made of 12 mm thick teakwood plank complete as specified and directed by GE/E-in-Charge.

Table Bed Side (FD- 28, 276, 210, DB- 3956, 4049) : Taking out old unserviceable side of table bed side and S&F new side of suitable size made of 18 mm thick pre- laminated PVC board, exterior grade, both side with teak shade fixed with 4mm x18mm teak wood beading to the front side and bottom of side/as existing in FD 210. Further fixing two PVC rings at the bottom of each side in FD 276. All as specified and directed by GE/E-in-Charge

All as per item No 36.00 above but taking out old unserviceable bottom and S&F new bottom of suitable size made of 18 mm thick pre- laminated PVC board, exterior grade, both sides with teak shade and bottom shall be covered with 4mm size teak wood beading fixed with panel pins on front sides complete/as exisitng, all as specified and directed by GE/E-in-Charge.

All as per item No 36.00 above but unserviceable top made of 18 mm thick pre- laminated PVC board, exterior grade of suitable size, both side with teak shade of suitable size complete all/as existing, as specified and directed by GE/E-in-Charge.

All as per item No 36.00 taking out old unserviceable Center shelf of table bed side and supply and fixing new center shelf of suitable size, made out of 12 mm thick pre- laminated particle board, exterior grade, one side with teakwood shade fixed with 4mm thick beading on the front duly polished complete.

All as per item No 36.00 above but aking out old U/S back of table bed side and supply and fixing new back made out of 4 mm thick teak veneer plywood inside of suitable size complete.

Table Writing/Table writing JCO Modified (Drawing No FD- 249, 275 DB 3959):- Taking out old unserviceable leg of table writing and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No. 37.00 above but unserviceable side stiffener complete.

All as per item No.37.00 above here-in-brfore but unserviceable centre stiffener complete.

All as per item No. 37.00 above here-in-brfore but taking out broken/un-serviceable top of table writing/JCO modified and supply & fixing new top of suitable size, made of 18 mm thick MDF board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No.37.00 above here-in-brfore but Taking out old unserviceable top long rails of table writing and supply & fixing new long rail of suitable size made of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No. 37.00 above here-in-brfore but Taking out old unserviceable top short rails of table writing and supply & fixing new long rail of suitable size made of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No. 37.00 above here-in-brfore but unserviceable handle and S & F of handle ISI marked as existing/as approved by GE/E-in-Charge.

All as per item No. 37.00 above here-in-brfore but unserviceable lock and S & F of Brass locks 50 mm four levers ISI marked as approved by GE/E-in-Charge.

All as per item No.37.00 above here-in-brfore but replacement shutter of table writing and S&F new shutter of suitable size complete on all respect , made of 18 mm thick pre-laminated particle board, exterior grade teakwood shade and including fixing of teak wood beading of 4 mm x 18 mm with adhesive and panel pins on three sides and 10mm x 18mm on the fourth wherein shutter is to be fixed with piano hinge of medium quality to the cabinet duly given a coat of high gloss French polish alongwith magnetic catcher as specified and directed by GE/E-in-Charge. .

All as per item No. 37.00 above here-in-brfore but replacement of bottom of the drawer with 6 mm thick plywood BWR of suitable size as directed by GE/Eng-in-Charge

All as per item No. 37.00 above here-in-brfore but replacement of front of the drawer with 18mm thick prelaminated particle board exterior grade of suitable size as directed by GE/Eng-in-Charge

All as per item No.37.00 above here-in-brfore but replacement of side of cabinet with 18mm thick prelaminated particle board exterior grade of suitable size as directed by GE/Eng-in-Charge

All as per item No. 37.00 above here-in-brfore but replacement of shelf with 18mm thick prelaminated particle board of suitable size as existing directed by GE/Eng-in-Charge

All as per item No.37.00 above here-in-brfore but replacement of bottom of cabinet with 18mm thick prelaminated particle board of suitable size as existing directed by GE/Eng-in-Charge

All as per item No. 37.00 above here-in-brfore but replacement of old unserviceable knobs and supply and fixing by teak wood finished knobs with machine screw and washer of approved quality by GE/E-in-Charge

All as per item No. 37.00 above here-in-brfore but replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by GE/E-in-Charge

STAND WASH HAND FD-12 : Replacement of unserviceable teak wood plank of the top with new teak wood plank Ist class suitable size complete as directed and specified by Eng-in-Charge

All as per item No. 38.00 above but legs as existing suitable size as directed by Eng-in-Charge

All as per item No. 38.00 above but 12mm thick teak wood batten at the bottom complete as directed by GE/Eng-in-Charge

All as per item No.38.00 above but side stiffner complete as directed by GE/Eng-in-Charge

TABLE 5' X 2' 10" (W) FD-498 : Replacement of unserviceable legs with new Ist class teak wood legs 50mm x 50mm in section of top 40mm x 40mm in section of bottom complete as specified and directed by GE/Eng-in-Charge

All as per item No 39.00 above but replacement of unserviceable long rail 25mm x 100mm as psecified and directed by GE/Eng-in-Charge

All as per item No 39.00 above but replacement of short rail complete as specified and directed by GE/Eng-in-Charge

All as per item No 39.00 above but replacement of unserviceable plank of the Table top without damaging the adjacent parts with a new plank of teakwood of suitable size duly french polished complete as existing/specified and directed by GE/Eng-in-Charge

All as per item No 39.00 above but replacement of side stiffners 25mm x 50mm of suitable size existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 39.00 above but Tightening of all parts/joints of whole table 5'x2'10" with bamboo pins.

All as per item No 39.00 above but replacement of centre stiffner 25mm x 50mm of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

TABLE DRAUGHTSMAN FD- 6(M), 303, 211 : Replacement of unserviceable bottom of drawer large with 6mm thick plywood BWR complete as specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of unserviceable bottom of drawer small with 6mm thick plywood BWR complete as specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of 25mm x 50mm stiffner at the bottom to support the drawer complete as specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of old unserviceable 100mm long brass handle completer as specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of hasp and staple of aluminum of 75mm long completer as specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of legs of with new leg of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of unserviceable plank at the table top with a new plank of teakwood as complete as exisiting/specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of unserviceable side stiffners complete as specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of unserviceable centre stiffners complete as specified and directed by GE/Eng-in-Charge

All as per item No 40.00 above here-in-before but replacement of unserviceable foot rest with new teak foot rest 75mm x 50mm complete as specified and directed by GE/Eng-in-Charge

TABLE 12' X 2' : Replacement of unserviceable legs of with new Ist class teak wood legs made to shape as existing of suitable of size 100mm x 100mm section at top and 75mm x 75mm at bottom duly french polished to match existing colour as specified and directed by GE/Eng-in-Charge

All as per item No 41.00 above here-in-before but replacement of long rails with new teak wood long rails of size 40mm x 150mm of suitable length french polished to match existing colour as specified and directed by GE/Eng-in-Charge

All as per item No 41.00 above here-in-before but replacement of short rails with new teak wood short rails of size 40mm x 150mm of suitable length french polished to match existing colour as specified and directed by GE/Eng-in-Charge

All as per item No 41.00 above here-in-before but replacement of stiffner with new teak wood stiffner of size 40mm x 50mm complete joing two long rails with dove tailed joint as directed and specified by GE/Eng-in-Charge

All as per item No 41.00 above here-in-before but Tightening of all parts/joints of whole table 5'x2'10" with bamboo pins.

All as per item No 41.00 above here-in-before but rreplacement of unserviceable planks/prelaminated top of the table top with new a planks of teakwood/ prelaminated particle board complete as existing/directed and specified by GE/Eng-in-Charge

TABLE COMPUTER (Wooden/Particle board) : Replacement of unserviceable top of computer table and supply and fixing of new top of prelaminated particle board 18mm thick exterior grade to computer table complete all asexisting/specified and directed by Engineer-in-Charge.

All as per item No 42.00 above but replacement of unserviceable side of computer table and supply and fixing of new prelaminated board 18mm thick exterior grade to computer table complete all as existing/specified and directed by Engineer-in-Charge.

All as per item No 42.00 above but replacement of key board stand/tray and supply and fixing of new key board made of prelaminated particle boardexterior grade of 18mm thick complete all as existing/specified and directed by Engineer-in-charge.

All as per item No 42.00 above here-in-before but replacement of Drawer and supply and fixing of complete all including brass lock of 50 mm with duplicate keys as existing/specified and directed by Engineer-in-charge.

All as per item No 42.00 above here-in-before but replacement of Self and supply and fixing of new prelaminated particle board 18mm thick to computer table complete all as existing/specified and directed by Engineer-in-charge.

All as per item No 42.00 above here-in-before but replacement of Bottom and supply and fixing of new prelaminated particle board 18mm thick to computer tablecomplete all as specified and directed by Engineer-in-charge.

All as per item No 42.00 above here-in-before but replacement of unserviceable supply and fixing caster wheel of superior quality complete all as specified and directed by Engineer-in-Charge.

TV TROLLEY (FD-E6/MAP/04(R) : Replacement of unserviceable broken glass and supply and fixing new glass door 5.5 mm thick with edges well smoothened complete all as specified and directed by Engineer-in-Charge.

All as per item No 43.00 above but replacement of unserviceable supply and fixing Magnetic catcher of supperior quality complete all as specified and directed by Engineer-in-Charge.

All as per item No .43.00 above but replacement of unserviceable supply and fixing Caster wheel of supperior quality complete all as specified and directed by Engineer-in-Charge.

All as per item No43.00 but replacement of unserviceable Top of TV Trolly and supply and fixing of new prelaminated mdf board exterior grade both side teak shade 18mm thick to TV Trolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 43.00 above here-in-before but replacement of unserviceable Side of TV Trolly and supply and fixing of new prelaminated mdf board exterior grade both side teak shade 18mm thick to TV Trolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 43.00 above here-in-before but replacement of unserviceable Bottom of TV Trolly and supply and fixing of new prelaminated mdf board exterior grade both side teak shade 18mm thick to TV Trolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 43.00 above here-in-before but replacement of unserviceable stainless steel fitting for glass shutter and supply and fixing of new stainless steel fitting for glass shutter complete all as specified and directed by Engineer-in-Charge.

All as per item No 43.00 above here-in-before but replacement of unserviceable frame of the shutter of TV Trolly and supply and fixing of frame of the shutter of prelaminated mdf board exterior grade both side teak shade 18mm thick to TV Trolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 43.00 above here-in-before but replacement of unserviceable Self of TV Trolly and supply and fixing of new prelaminated mdf board exterior grade both side teak shade 18mm thick to TV Trolly complete all as specified and directed by Engineer-in-Charge.

TABLE OFFICE CLERK WOODEN DRG NO F, WDF: Replacement of unserviceable planks of Table top of table office clerk wooden, and S&F of new teakwood plank as existing complete as per standard workmenship as per drawing.

All as per item No 44.00 above but replacement of unserviceable leg, supply & fixing of new leg of first class Teak wood, as per Drg.

All as per item No 44.00 above but replacement of unserviceable top long rail, supply and fixing of new top long rail of first class Teak wood, as per Drg.

All as per item No 44.00 above here-in-before but replacement of unserviceable top short rail, supply and fixing of new top short rail of first class Teak wood, as per Drg.

All as per item No 44.00 above here-in-before but replacement of unserviceable drawer, supply and fixing of new drawer of deodar except bottom which shall be of 6mm ply wood commercial and front portion of drawer shall be of Teak wood with knob as approved by GE/Engr-in-Charges. ISI Marked

All as per item No 44.00 above here-in-before but replacement of unserviceable plywood of drawer, supply and fixing of new plywood of bottom of drawer which shall be of 6mm ply wood commercial as approved by GE/Engr-in-Charges. ISI Marked

All as per item No 44.00 above here-in-before but replacement of unserviceable long stiffener, supply and fixing of new stiffener complete type of first class hard wood Teak as per Drg.

All as per item No 44.00 but replacement of unserviceable short stiffener, supply and fixing of new stiffener complete type of first class hard wood Teak as per Drg.

TABLE OFFICE OFFICER WOODEN DRG NO WDF : Replacement of unserviceable planks of Table top of table office clerk wooden, and S&F of new teakwood plank as existing complete as per standard workmenship as per drawing.

All as per item No 45.00 above but replacement of unserviceable leg, supply & fixing of new leg of first class Teak wood, as per Drg.

All as per item No 45.00 above but replacement of unserviceable drawer, supply and fixing of new drawer of deodar wood except bottom which shall be of 6mm ply wood commercial. Front portion of drawer shall be of Teak wood with knob as approved.

All as per item No .45.00 above but repairs to the unserviceable parts (battens, rails, pannels,stiffners, shutters) in the mainframe of the cabinet of table officers as per Drg.

All as per item No 45.00 above here-in-before but replacement of unserviceable lock, supply and fixing of new new brass lock 50 mm ISI marked as per Drg/directed by GE/Engr-in-charge.

TABLE ONE PIECE ALL PURPOSE: ( FD- 284, 223): Taking out old unserviceable leg of Table one piece all purpose and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by GE/E-in-Charge.

All as per item No 46.00 above but unserviceable long rail complete.

All as per item No 46.00 avove but unserviceable short rail complete.

All as per item No 46.00 above but unserviceable short stiffner/bottom rail complete.

All as per item No 46.00 above but replacement un-serviceable table top of Table one piece for all purpose and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, exterior grade, one side with teak wood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as specified and directed by GE/E-in-Charge..

All as per item No 46.00 above but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 15mm height as directed by GE/E-in-Charge

TABLE 2'-6"x2'-6": (Drawing No FD- 284, 223): Taking out old unserviceable leg of table 2'-6"x2'-6" and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by GE/E-in-Charge.

All as per item No 47.00 above but unserviceable long/short rail complete.

All as per item No 47.00 above here-in-before but taking out broken/un-serviceable top of Table 2'6"x2'6" and supply & fixing new top of suitable size, made of 18 mm thick MDF board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 47.00 above here-in-before but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 10mm height as directed by GE/E-in-Charge

POLISHING :- Preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces with sand paper, removing pluck marks with wooden scraper, cleaning of dirt and pluging of holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surface with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish of Ist quality as per manufacturer’s instructions till glossy finish is achieved for the following furniture items complete all as specified and directed :- (a) Almirah medium/Small with shelf

All as per item No 48.00 above but Almirah large with shelf

All as per item No 48.00 above but Almirah large with glass panel door

All as per item No 48.00 above but Bed Newar/Bed Plywood Top (Drawing No FD-21,245,246, 247,214,3970)

All as per item No 48.00 above but Book Shelf open Small

All as per item No 48.00 above but Book Shelf open Large

All as per item No 48.00 above but Book case sectional

All as per item No 48.00 above but Bin soiled linen small/large

All as per item No 48.00 above but Board notice 6x3/6x4

All as per item No 48.00 above but Board notice 8x4

All as per item No 48.00 above here-in-before but Bench workshop of various sizes(6x3,6x4,7x3,8x3,8x4)

All as per item No 48.00 above here-in-before but Bench workshop of 12x3x3

All as per item No 48.00 above here-in-before but Chair Bkb

All as per item No 48.00 above here-in-before but Chair Dining (Drawing Nos FD-16/262/279/228/203)

All as per item No 48.00 above here-in-before but Chair Dinning Long Back/cushioned/similar pattern

All as per item No 48.00 but Chair Easy (Drawing No FD-229)

All as per item No 48.00 above here-in-before but Chair Easy Cushioned

All as per item No 48.00 above here-in-before but Chair writing (Drawing No FD-250, 280)

All as per item No 48.00 above here-in-before but Cabinet with Glass Door

All as per item No 48.00 above here-in-before but Console Table with Glass

All as per item No 48.00 but Charpoy Cotton Newar with MNF

All as per item No 48.00 above here-in-before but Desk With Dias

All as per item No 48.00 but Display Board with Various Sizes

All as per item No 48.00 above here-in-before but Dressing Mirror Gents

All as per item No 48.00 above here-in-before but Hat stand with mirror

All as per item No 48.00 but above here-in-before but Hat Stand with Mirror and Drawers with 45 Pegs

All as per item No 48.00 above here-in-before but Hat Stand with Mirror and Drawers with 10/20 Pegs

All as per item No 48.00 above here-in-before but Locker Fliying Kit wooden

All as per item No 48.00 above here-in-before but Mirror with frame 5'x2'

All as per item No 48.00 above here-in-before but Mirror with Shelf

All as per item No 48.00 above here-in-before but newspaper stand

All as per item No 48.00 above here-in-before but Peg table

All as per item No 48.00 above here-in-before but Rack 3 Spaces

All as per item No 48.00 above here-in-before but Rack 4 Spaces

All as per item No 48.00 above here-in-before but Rack for Record/stationary

All as per item No 48.00 above here-in-before but Side Board/Wooden

All as per item No 48.00 above here-in-before but Sofa Set 4 Seater FD-373/281

All as per item No 48.00 above here-in-before but Sofa Single Chair FD-281/373

All as per item No 48.00 above here-in-before but Sofa Set 5 Seater (Drawing No FD- 373, 281/378)

All as per item No 48.00 above here-in-before but Stool Dressing CB (Drawing No 27,252,274)

All as per item No 48.00 above here-in-before but Stool 2' high

All as per item No 48.00 above here-in-before but Table Bed Side (Drawing No FD- 28, 248, 276, 210, DB- 3956, 4049)

All as per item No 8.00 above here-in-before but Table Cards with four chairs

All as per item No 48.00 above here-in-before but Table Writing (Drawing No FD- 249, 33,276, DB 3959)

All as per item No 48.00 above here-in-before but Table Writing med

All as per item No 48.00 above here-in-before but Table Office Officer wooden

All as per item No 48.00 above here-in-before but Table Office Clk wooden

All as per item No 48.00 above here-in-before but Table Dining 8 Person (Drawing No FD- 30, 239, 273, 376)

All as per item No 48.00 above here-in-before but Table Dining 6 Person (Drawing No FD- 30, 239, 273, 376)

All as per item No 48.00 above here-in-before but Table Draughtsman

All as per item No 48.00 above here-in-before but Table one Piece All purpose

All as per item No 48.00 above here-in-before but Table Dressing gents (Drawing No FD-230/ )

All as per item No 48.00 above here-in-before but Table Dressing Ladies (Drawing No FD-251,378)

All as per item No 48.00 above here-in-before but Table Centre (Drawing No FD-29, 274, 235)

All as per item No 48.00 above here-in-before but Table 5'x2'10''

All as per item No 48.00 above here-in-before but Table 3' X 2' with/without Drawer (Drawing No FD- 283, 284, 223, 224)

All as per item No 48.00 above here-in-before but Table 6'x3'6''

All as per item No 48.00 above here-in-before but Table 900mmx600mm with Drawer

All as per item No 48.00 above here-in-before but Mirror Dressing Gents MAP

All as per item No 48.00 above here-in-before but Locker for flying kit wooden

All as per item No 48.00 above here-in-before but Teapoy wooden

All as per item No 48.00 above here-in-before but TABLE 2'-6"x2'-6" Note: - The BOQ Comprises of quantities of items of furniture to be repaired/painted/recanned at site in Pathankot, Jandwal and Dalhousie as directed by Engr-in-Charge/GE. Bifurcation wrt item of furniture can be confirmed from BSO office.

KALSI CONSTRUCTION CO

M/S HEAVEN BUILDERS AND ENGINEERS

Harson Enterprises