MAINTENANCE OF STAFF QUARTERS AT DAFTARKHANA (OLD DAK BUNGALOW), FATEHPUR SIKRI, AGRA

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Rate Including G.S.T.).

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work. (Rate Including G.S.T.).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. (Rate Including G.S.T.).

Providing & installation of electric fittings & equipments in the Staff Quarter at Fatehpur Sikri, Agra. (Detail Enclosed & Rate Including G.S.T.).

Providing & fixing of water supply lines and fittings & equipments in the Staff Quarter at Fatehpur Sikri, Agra. (Detail Enclosed & Rate Including G.S.T.).

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.50 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.50 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil. (Rate Including G.S.T.).

Providing and laying in position cement concrete of proportion 1:4:8 (1Cement, 4 C. sand & 8 graded stone - aggregate nominal size 40mm ) excluding the cost of centering & shuttering all work up to plinth level. (Rate Including G.S.T.).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). (Rate Including G.S.T.).

Pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 C.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 C.sand) finished rough with sponge. (Rate Including G.S.T.).

Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) :Red sand stone slab 40 to 50 mm thick etc. Complete. (Rate Including G.S.T.).

Dismantling tile work laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm. (Rate Including G.S.T.).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. (Rate Including G.S.T.).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Rate Including G.S.T.).

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick. (Rate Including G.S.T.).

Providing and fixing of M.S. Angle iron 50x50x6 mm purlin for shed including nut-bolt with washer, screw, cutting, welding etc complete. (Rate Including G.S.T.).

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m². (Rate Including G.S.T.).

Providing and fixing 1 mm thick M.S. sheet door, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, including applying a priming coat of approved steel primer. (Rate Including G.S.T.).

Bankey Bihari Stone Merchant

M/S. R S SHARMA CONTRACTOR