PROVISION OF DEFICIENT FURNITURE OF MD ACCN AT BRD AF STN UNDER GE (AF) GURGAON NO.1

Amount

Schedule 'A' Part-I (Wooden Furniture)

BIN LINEN MULTIPURPOSE, FD/E6/MAP/09 DIMENSION: The overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high DESCRIPTION: a) It shall be made of BWR plywood of grade - A of thickness as specified in drg; in lieu of prelaminated particle board. b) 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of shutters and drawers. c) Each drawer shall be provided with 2 x Nos of 12 inch long stainless steel telescopic channels. d) Irrespective of what is shown on drg,the base of bin linen multipurpose shall be of size 1200mm long x 450mm wide x 75mm high, made of 1st class teak wood scantling 30mm thick. The bottom frame shall have four nos of 25mmx25mm stiffeners placed and fitted at equidistant positions inside the base frame. All wood to be used shall be 1st class hard teak wood. The base frame shall be fixed with 85mm long screws fitted from the bottom. e) Drawer and shutter shall be provided with 100mm long 8mm dia chrome plated handles. f) Shutter to be provided with magnetic catchers at inside. Rest all specifications and dimensions are as per drg. FINISH: All unlaminated plywood surface/wooden surface shall be polished in mat melamine finish of walnut shade.

SOFA SET FIVE SEATER (3+1+1),FD-281 DIMENSION: Overall size of three seater shall be 1730mm wide, 725mm deep and 530mm high up to arm level and one seater shall be 670mm wide and 725 mm deep and 530mm high up to arm. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood b) Sofa set five seater shall consist of one three seater and two single seats. c) 10 x Nos of foam cushions to each set each of size 530mm x 560mm x 100mm thick of 40 density covered with white lining cloth and best quality tapestry cloth of rate not less than 450 per mtr shall be provided with nylon zipper at one edge duly covered under the tapestry cloth flap. d) PVC hard rubber shoes of 25mm dia shall also be provided to bottom of each leg with 20mm long screws. Rest all specifications and dimensions are as per drg FINISH:- All wooden surface shall be polished with high gloss melamine polish in walnut shade after preparation of surfaces. .

CHAIR COMPUTER ,FD/E6/MAP/01 DIMENSION: The overall size of the chair shall not be less than 480mm wide and deep and 550mm high upto seat from ground level. DESCRIPTION: a) The Seat & Back shall be made of PU foam of density 45 ± 2 Kg/m3 upholstered with changeable fabric upholstery covers b) The base of chair shall have five prong with pneumatic up & down with one point locking mechanism. c) Handle arm shall be gas-assisted injection molded from black polypropylene. Revolving & tilt should have a full 360 degree revolving mechanism with 17 deg. d) Maximum and minimum height of gas lift shall be 930mm and 830 mm respectively. e) Color of seat upholster should be post office red, blue or black. FINISH: All metal parts shall be dry powder coated in thickness more than 50 microns.

CHAIR DINING,FD-279 DIMENSION: The overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890 mm high from back. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood b) PVC hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. C) caning shall be done in true godrej pattern with virgin plastic cane of 2mm wide,0.6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. Rest all specifications and dimensions are as per drg FINISH:-The chair shall be polished in high gloss melamine polish in walnut shade after preparation of surfaces.

CHAIR VERANDAH ,FD-256 DIMENSION:The overall size of the chair shall not be less than 460mm wide,600mm deep and 355mm high jupto seat from ground level and over all height 760 mm DESCRIPTION: a) The frame of the chair verandah shall be made up of 20mm dia conduit pipe of wall thickness 1.6mm. b) Seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0.6 mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. c) PVC hard rubber toes shall be provided to each leg of chair verandah. Rest all specifications and dimensions are as per drg FINISH:-The chair shall be dry powder coated in white after preparation of surface .

CHAIR WRITING OFFICERS,TP (FD/E6/MAP/12) DIMENSION: The overall size of the chair shall not be less than 475mm wide and deep and 580mm high at seat from ground level. DESCRIPTION: a) The seat and back are to be made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Melamine foam. The back foam is to be designed with contoured lumbar support for extra comfort. b) The foam is to be molded with density = 45 +/-2 kg/m3 and, Hardness = 20 +/- 2 at 25% compression. c) Arm rest shall be one piece FINISH: All metal parts shall be dry powder coated in thickness more than 50 microns.

MIRROR DRESSING GENTS,FD/E6/MAP/16 DIMENSION: Overall size shall be 1200mm high, 600mm wide and 100mm high. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood b) It shall be made up of BWR plywood of grade - A of specified thickness as per drg in lieu of prelaminated particle board. c) 1 mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of shutters and drawers. d) Looking mirror shall be 5 mm thick fixed inside the teak wood frame made out of 38mmx25mm section. e) 03 x glass shelves of 5mm thickness shall be fixed inside the box with glass holders as shown in drg. Rest all specifications and dimensions are as per drg FINISH: All unlaminated plywood surface/wooden surface shall be polished in high gloss melamine polish in walnut shade after preparation of surfaces.

TABLE PEG,FD-384 DIMENSION; Overall size shall be 450mm long,300mm wide and 380mm high. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood. b) Irrespective of what is shown on drg,the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading. c) Irrespective of what is shown on drg a center stiffener of size 20x40mm shall be provided at center of side bottom rails for extra support d) PVC hard rubber shoes of 25mm dia shall also be provided to bottom of each leg with 20mm long screws. Rest all specifications and dimensions are as per drg FINISH:- All wooden surface shall be polished with high gloss Melamine polish in walnut shade after preparation of surfaces.

TABLE CENTER,FD-274 DIMENSION:Overall size shall be 900mm long, 450mm wide and 400mm high. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood. b) Irrespective of what is shown on drg,the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading c) Irrespective of what is shown on drg, one center stiffener of size 20mmx50mm shall also be provided length wise at center in between the side bottom rails d) 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs with 20mm long screws Rest all specifications and dimensions are as per drg FINISH:All wooden surfaces shall be polished in high gloss Melamine finish of walnut shade after preparation of surfaces.

TABLE DINING 6 Per ,FD/MAP-II/03 DIMENSION:Overall size shall be 1500mm long, 900mm wide and 750mm high. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood b) Irrespective of what is shown on drg,the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading c) Irrespective of what is shown on drg ,the top shall be fixed over the frame with suitable screws from under neath. d) Eight wooden corner brackets made to shape of size 100mm x 100mm x 35mm thick shall also be fixed in between the legs and top rails with adhesive and wooden screws to make the table more strudy. e) 25mm dia hard plastic shoes shall also be provided to bottom of all legs with 20mm screws. Rest all specifications and dimensions are as per drg FINISH:All wooden surfaces shall be polished in high gloss Melamine finish of walnut shade after preparation of surfaces.

TABLE DRESSING LADIES INCLUDING STOOL,FD/MAP-II/07 DIMENSION: The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high and Overall size of the stool shall be 440mm wide 350mm deep and 425mm high. DESCRIPTION:- a) It shall be made up of BWR plywood of grade - A of specified thickness as per drg in lieu of prelaminated particle board. b) 1 mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of shutters and drawers. c) Drawers shall be provided with 2 x Nos of 12 inch long stainless steel telescopic channels. d) Drawer and shutter shall be provided with 90mm long recessed metal handles and shutter to be provided with magnetic catchers. e) Looking mirror shall be 5mm thick electro copper plated fixed over 6mm thick plywood back f) 04 x Nos heavy duty double wheel castors shall be provided at base ply . g) The seat of the stool shall be 75mm thick, 40 density foam cushion covered with best quality tapestry cloth of rate not less than 450 per mtr Rest all specifications and dimensions are as per drg FINISH: All unlaminated plywood surface/wooden surface shall be polished in high gloss melamine polish in walnut shade after preparation of surfaces.

Schedule 'A' Part-II (Steel Furniture)

ALMIRAH LARGE STEEL (MAP),FD/E6/MAP/18 DIMENSION:-The Overall size of almirah large steel is 1900mm high, 910mm wide and 490mm deep. DESCRIPTION:- a) It shall be made of 1mm thick mild steel sheet/CRCA . All joints shall be riveted and welded thoroughly. b) The almirah shall have three shelves, one locker and one drawers with two partitions at upper half with hanging arrangement. c) The almirah shall have one spring action recessed handle 150mm long with built in locking arrangement fitted to cut out space in one shutter or normal handle 120mm long having three way locking system with proper workmanship. d) The handle of inside drawer shall be made to "S" Shape by bending the MS sheet of front face of drawer to full length. e) The handle of inside locker shall be provided with two way bolt locking system having duplicate flat keys Rest all specifications and dimensions are as per drg FINISH:- The almirah shall be dry powder coated in double shade (shutter in off white and outer frame in steel grey) after preparation of surface.

ALMIRAH MEDIUM STEEL,FD-1032 DIMENSION: Overall size shall be 1270mm high, 765mm wide and 440mm deep. DESCRIPTION:- a) It shall be made of 1mm thick mild steel sheet/CRCA sheet . All joints shall be riveted and welded thoroughly. b) The almirah shall have three shelves. c) The almirah shall have one spring action recessed handle 150mm long with built in locking arrangement fitted to cut out space in one shutter with proper workmanship/normal handle 120mm with three way locking system. Rest all specifications and dimensions are as per drg FINISH:- The almirah shall be dry powder coated in double shade (shutter in off white and outer frame in steel grey after after preparation of surface .

RACK SHOE STEEL,FD/E6/MAP/02(R) DIMENSION: Overall size shall be 700mm long,300mm wide and 880mm high. DESCRIPTION: The legs of the shoe rack shall be of 25mm dia MS pipe of 18 gauge. The five shelves of the rack shall be of 20mm dia MS pipe of 18 gauge welded to legs. The shelves shall have 3mm dia MS rod 9 Nos in widthwise and 3 nos in lengthwise welded to 20mm dia shelf frame. FINISH: Pre treated with epoxy powder coated oven baked with ivory white colour/white/warm grey

TABLE BED SIDE STEEL,FD/E6/MAP/15(R) DIMENSION:The overall size of the table bed side 450mm x 450mm x 500mm DESCRIPTION: a) The frame shall be of 18mm square hollow pipe of 18 gauge. b) It shall be made up of BWR plywood of grade - A of specified thickness as per drg in lieu of prelaminated particle board. c) 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of drawers. d) Each drawer shall be provided with 2 x Nos of stainless steel telescopic channels. e) Drawer shall be provided with 100mm long 8mm dia chrome plated handles Rest all specifications and dimensions are as per drg FINISH: All metal surface shall be dry powder coated in black and all unlaminated surfaces shall be polished in satin/mat melamine finish of walnut shade after preparation of surfaces.

Rana Construction Co