CA NO GE/ND66/202122 REPAIR/ MAINTENANCE OF CERTAIN ITEM OF JOINERY, ALUMINIUM DOORS, WINDOWS, FALSE CEILING IN CERTAIN BUILDINGS OF ABHM TPT UNIT ASC IN THE AOR OF AGE B/R SP MARG UNDER GE NEW DELHI

Amount

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each (Except PVC chowkhats) complete all as specified and as directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each (Except PVC chowkhats) complete all as specified and as directed.

Taking down PVC chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and as directed.

Taking down shutters of any description n. exc 1.00 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed.

M&L for plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F pressed steel frames for doors of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F pressed steel frames for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F for stainless steel fastener of size 200 to 250mm for fixing wooden door frame and like in position complete all as specified and as directed.

M&L for MS flat iron as in hold fast, bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains, hand made sliding bolts; clamps; hold fasts; wall ties, hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in anchoring holdfast, windows cills, jambs, bed plate and similar work, etc complete all as specified and as directed.

M&L for 2nd class hard wood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters complete all as specified and as directed.

M&L for 2nd class hard wood 30mm thick glazed and skeleton window and ventilators shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters complete all as specified and as directed.

S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter complete all as specified and as directed.

S&F 35mm thick plain framed, panelled shutter (two panel) 2nd class hard wood with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering both faces. The size of rail and stile as per IS : 1003 (part I), kinl seasoned and chemically pressure treated complete all as specified and as directed.

S&F aluminium sheet, plain, 0.5 mm thick , including taking down old sheet from doors all as specified.

M&L for Solid PVC Door frame of size 50 mm x 95 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing.

S&F for factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing.

S&F factory made solid PVC door shutter 30mm thick (stiles), wire gauzed i.e. panel will be of wire gauzed in lieu of PVC sheet panel both side prelam. The wire gauzed shall be wrapped an additional square 8mm mild steel solid tube & this tube shall be welded to mild steel tubes. The wire gauzed shall be steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40mm fixed and stretched to tighten firmly and drawing in SSR (Part - II) complete all as specified and as directed.

Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work or beads etc. complete all as specified and as directed.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and as directed.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and as directed.

M&L for beads of 2nd class hard wood, straight (any size) for glazed or gauged joinery, renewed, including mitres etc,. and removing old beads as in repairs complete all as specified and as directed.

S&F aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified and as directed.

S&F in repair for aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified and as directed.

S&F aluminium anodized barrel tower bolt of 150 mm length of extruded section complete all as specified and as directed.

S&F in repair aluminium anodized barrel tower bolt of 150 mm length of extruded section complete all as specified and as directed.

S&F aluminium anodized barrel tower bolt of 100 mm length of extruded section complete all as specified and as directed.

S&F in repair aluminium anodized barrel tower bolt of 100 mm length of extruded section complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt, of size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and as directed.

S&F in repair aluminium alloy anodised sliding door bolt, of size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and as directed.

S&F aluminium anodised sliding door bolt, of size 250mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and as directed.

S&F in repair for aluminium anodised sliding door bolt, of size 250mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and as directed.

S&F for aluminium alloy anodised sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and as directed.

S&F in repair for aluminium alloy anodised sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and as directed.

S&F stainless steel butt hinges of size 75mm complete all as specified and as directed.

S&F in repair stainless steel butt hinges of size 75mm complete all as specified and as directed.

S&F stainless steel butt hinges of size 100mm complete all as specified and as directed.

S&F in repair stainless steel butt hinges of size 100mm complete all as specified and as directed.

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open) shall be 40 mm complete all as specified and as directed.

S&F in repairs Double action spring hinges, of size 150mm, mild steel with steel wire spring, stove enamelled , black, complete all as specified and as directed.

S&F for 300mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate including welding work complete fixed to pressed steel frame complete all as specified. .

S&F in repairs 300mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate including welding work fixed to pressed steel frame complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised,100 mm long complete all as specified and as directed.

S&F in repairs Aluminium handles, cast type, anodised, 100 mm long complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised, 150 mm long complete all as specified and directed.

S&F in repairs Aluminium handles, cast type, anodised,150 mm long , complete all as specified and directed.

S&F in repairs for brass Wardrobe hooks (single) of size 50mm to 60mm , complete all as specified and directed.

S&F in repair Aluminium plate type II, hooks and eyes 150 mm size for gates and shutters as in fixed in repairs complete all as specified and directed.

S&F 40mm dia, cupboard knobs brass polished with nut, screw and washer complete all as specified and directed.

S&F in repair 40mm dia, cupboard knobs brass polished with nut, screw and washer complete all as specified and directed.

S&F in repair hasp and staples, size 100mm/150mm, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor overall length of cover plate 150 mm complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor overall length of cover plate 150 mm.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repair Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repairs aluminium door seal upto 1200 mm long on bottom of door,

S&F in repairs Magic eye for main door complete all as specified

S&F in repairs Double aluminium channel size 10x20x2mm including joining cleat for fixing etc. complete all as specified and directed.

S&F in repair MS roller with "C" shape stapple, chromium plated for 5.00 mm thick sheet glass, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L including taking down for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F including taking down door closer aluminium extruded section body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but n. exc 5 cm in length, thickness of metal to be welded exc 6mm but not exc 9mm thick complete all as specified and as directed.

M&L in repairs for 6mm thick plywood, grade BWR, type BB, fixed with screws to timber frame, etc. complete all as specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood lipping all around including polishing to lipping complete all as specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood lipping alround incl polishing to lipping complete all as specified and directed.

M&L for 18/19 mm thick PVC solid both side prelam celluca plyboard for cabinet boxes & shutter , cup boards, showcase etc with shelf and shutter incl lipping to edges of exposed surface including provision of fixing arrangement complete all as specified and directed.

M&L in repair for 25 mm thick block board, grade -2 quality, interior grade, commercial type fixed with screw to timber frame work as in CB shutter, shelves etc with 6 mm thick teak wood lipping all around incl polishing to lipping complete all as specified and directed.

M&L for 18 /19 mm thick block board, grade -2 quality, interior grade, commercial type fixed with screw to timber frame work as in CB shutter, shelves etc with 6 mm thick teak wood lipping all around incl polishing to lipping complete all as specified and directed.

Taking down cement plaster from brick/stone walls including racking out joints, hacking for keys and scrubbing down with water etc, complete all as specified and directed.

M&L for premix/readymix plaster 15mm thick on brick or concrete surfaces of walls in CM 1:4 finished even & smooth without using extra cement over a coat of ultratech seal (or equivalent from approved list of make and/or as approved by GE) and dry 5 plush as bonding agent (or equivalent from approved list of make and/or as approved by GE) including necessary formwork safety precautions up to six storey buildings complete all as specified and directed.

M&L for applying two coats of oil bound distemper over & including 2 coat of wall care putty to provide silky smooth finish after preparation of new or old undecorative plastered wall surface, finished the smooth surface of walls complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion (O.B.D) white or tinted over and incl one coat of primer on wall surface complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clip complete all as specified and as directed.

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F Glazing with 5.5mm thick sheet glass, ordinary quality, of any size including grinding of edges for showcase sliding shutter and shelves incl fixing brackets complete all as specified and directed.

S&F Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

M&L for solar control film 50 micron reflective type sticked to glass pane as per instructions of manufacturers exceeding 1.5 sqm complete all as specified and as directed.

Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxid primer.

M&L for Treating ends of posts, back of chowkhats etc area tarred exceeding 0.1 Sq.m but not exceeding 0.5 Sq.m each including preparation of surfaces of wood and wood based material, steel and iron work and treated with tar or coal tar black paint complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Brick work with old size sub class" B " bricks, straight or curved on plan, exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of bolts and nuts as required for smooth functioning of shutters and refixing the same incl hood cover complete all as specified and as directed.

S&F in repairs mild steel lock plate & handles made of of Flat iron 35 X 5 mm incl welding and painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F in repairs mild steel helical wire springs (confirming) to IS-6248-1970) for shutters not exc 12 Sqm of approved make complete all as specified and directed.

S&F in repairs 3.15mm thick mild steel bracket plate hexagonal or circular in shape incl welding complete all as specified and directed.

S&F in repairs MS Black pipe 40mm dia medium grade for rolling shutters shaft incl drilling holes for fixing springs and welding to MS brackets plate complete all as specified and directed. (Note : MS bracket plates shall be measured and paid for separately).

S&F in replacement of inter locking lath section formed from rolled MS strips 1.20mm thick for shutters above 3.5m width complete all as specified and directed.

S&F in replacement of steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position, manual type thickness of lath 1.00mm complete all as specified and directed.

S&F ball bearing for rolling shutter complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for as in grills, framed railing etc. complete all as specified and directed.

S&F in repairs pre-laminated PVC rigid foam sheet wall panelling of PVC sheet 1.15 x 595 and 5 mm thick stuck on inner frame work of 50 mm wide strips of 3.5Rmx30 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 600 mm C/C. The PVC strips to be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners complete all as specified and directed.

M&L for Providing & injecting chemical emulsion at points of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same complete all as specified and directed.

M&L incl dismantling of 1mm thick plain, galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed with screw) with grade of zinc coating 275 (for AC openings) complete all as specified and directed.

S&F including taking down powder coated aluminium window using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter including ornamental aluminium grill, 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc complete all as specified and directed.

S&F including taking down Powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size 02 Nos tower bolt 200 mm , sliding bolt 300 mm long 01 No, door handles 200 mm 2 Nos, aluminium butt hinges stainless steel 125 mm 04 Nos, hydraulic door closer heavy duty and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 1.00 mtr in width complete all as specified and directed.

S&F including taking down for aluminium anodized grill of bar size 6.25mm with square size 100mm fixed with suitable channel section complete all as specified and directed.

S&F including taking down aluminium anodized partition n.exc 1.2 sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board complete all as specified and directed.

S&F including taking down powder coated aluminium partition n.exc 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board complete all as specified and directed.

S&F 25 to 32 mm dia decorative powder coated drapery rod in assorted sizes, colour as approved including a pair of end brackets/finials, fixed to masonry/ concrete walls as required. Note : The provision of finial/end cap shall be as per site requirement and as directed. The cost of end cap/finial shall be deemed included in the per running meter cost as per the size of door / window.

Easing and adjusting aluminium doors incl replacement of small articles like rubber gaskets , aluminum beads screws etc incl taking down and refixing in same opening.

S&F in repairs chromium plated/ stainless steel body mortice lock vertical type size 100 mm MS 4 lever complete all as specified and directed.

Dismantling ceiling boarding/wall paneling board any description, fixed in any position with screw and removing rubbish out of MoD land complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

M&L 12 mm thick perforated particle board/tiles for insulation and accoustic purpose, 60X60cm in size fixed with nail on timber frame or snap grid complete all as specified and directed.

M&L for decorative fabric vertical blinds/louvers with complete fittings and fixtures channel or rails are made from high quality fabrics with strips or louvers, hang from the head rail and linked by chain at the bottom. Vertical blinds have two control. One allows the blind louvers to be tilted to the left or right and block the light out, let it in, or filter it by tilting the louvers to an angle and other one lets louvers fully black by pull either to the left, right or centre all blinds come with head rail with match to all component with complete accessories all as specified and directed. (complete fittings measured and paid in Sqm based on open area covered by blinds)

M&L providing and fixing Gypsum Board 12mm thick any size in ceiling fixed with screw to GI frame work such as ceiling application with sag resistant, superior finish by Gyproc jointing materials produced durable joint reinforcement and a smooth, continuous, crack-resistant surface ready for priming and final decoration firmly bonded with strong liners accoustic purpose in S/E and T/E edge type fixed with screw,nail timber frame or snap grid as per manufacturers instructions complete all as specified and directed.

S&F Gl frame work for fixing of Gypsum board (any size) seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

B S R Enterprises

M/S Sunil Steel Works

A N BUILDERS

R S CONSTRUCTION CO.