Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹45.0 L+₹2.2 L (5.20%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹47.1 L+₹4.4 L (10.2%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹48.4 L+₹5.6 L (13.1%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest bid | |
| 5 | L5₹49.1 L+₹6.3 L (14.8%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹78,000
Closing Date
18 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
PROVN OF ONE SENTRY POST WITH TOWER AT WAVOORA COB AND SPL REPAIR TO BLDG NO T 334 AND T 320 OF DIV CAMP UNDER STATION HQ ZANGLI
2023_MES_614797_1
GE 874/EWS-50/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹78,000
Yes
10 Nov 2023
21 Aug 2023
25 Sept 2023
21 Aug 2023
18 Sept 2023
4 Sept 2023
21 Aug 2023 - 28 Aug 2023
Amount
BR and EM Portion
Surface dressing n.exc 15 cm deep and getting out in soft /loose soil complete all as specified and as directed by Engr-in-Charge.
Excavating over areas, n.exc 1.5 m deep and getting outin soft /loose soil as directed by Engr-in-Charge.
Excavating over areas, exc 1.5 m deep and getting outin soft /loose soil as directed by Engr-in-Charge.
Excavation in trenches exc 1.50mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out as specified & directed by Engr-in-charge.
Returning filling including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified.
Supply only liquid water proofing compound.
M&L for RCC M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.basement slabs, under-reamed piles and mass concrete etc complete all as specified.
M&L for RCC M-30 as in Columns, pillars, piers, posts and struts complete all as specified.
M&L for RCC M-30 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L for RCC M-30 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified.
M&L Bitumen blown any grade applied hot, two coats, to concrete surfaces at the rate of 1.5 kg/sqm per coat & apply Polythene film, black, 50 micron laid over roof treatment lap not less than 100mm on roof slab treatment Complee all as specified.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Rough finish
M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions Rough finished.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Rough finished.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips,
M&L for Mild steel TMT bars 5mm dia and over and up to and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Gde I IS 432 (part I)
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in wall/septic tank/soakage well all as specified and directed.
M&L Rendering 15mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:4 finished the surface even and smooth without using extra cement , complete, all as specified.
M&L Rendering 10mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete, all as specified.
M&L Rendering 10 mm thick on ceiling concrete surface, in cement mortar 1:3 finished the surface even and smooth without using extra cement complete all as specified
M&L for prepration of new plaster surface of wall and applying three coat of white wash complete all as specified and directed.
All as per item above but in ceilling.
M&L for two coat of Oil Bound Distemper over a coat of wall Putty complete all as specified and directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
M&L Hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders.
M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stoen aggregates as in sub base to floor/path/hardstanding etc. complete all as directed.
M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and finished even and fair, complete all as specified and as directed.
M&L 50 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded aggregate) as in flooring finishing cement concrete surface even and smooth w/o using extra cement complete all as specified and directed.
M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
M&L Glazed ceramic colour tiles in vertical surface 600X 450X 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile on 10mm thick screed in CM 1:4 complete all as specified and directed.
Machine cut kota stone slab flooring 20-25mm thick over 15 mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
Kota stone slab 20-25mm thick in riser of steps, skirting, dado, pillar laid over 10mm cement screed and jointed with ditto as specified and directed
S&F false ceiling E-Board 600x 600mm tile 10mm thick semi perforated coloured, Anodised aluminium snap grid frame work (Size of grid 605 x 605mm )with GI suspended system, metal frame work, G.I. wire mesh in flase ceiling complete. make Arms strong/ other ISI MARKED approved by GE . as specified and directed
S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw including necessary scaffolding, any type, any location/height complete all as specified and directed by Engr-in-Charge.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, any type, any location/ height complete all as specified and directed by Engr-in-Charge.
M&L Milld Steel works as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections )Fe -410-W(gde-E-250) Quality A including distance pieces, cleats etc.
Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
M&L Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed by Engr -in charge.
M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long, Diameter of neck in 11 to 15mm complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and all as specified and as directed.
S&F Steel rolling shutters,1mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type at site as per specification & drawing. all as specified and as directed.
S & F Plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.
M & L for second class soft wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.all as specified.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet all as specified and directed by Engr -in charge.
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all fitting items all as specified and directed by Engr -in charge.
S & F Mild Steel butt hinges 100mm long medium weight.
S & F Mild Steel butt hinges 75mm long medium weight.
S & F 200 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
S & F 150 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S & F Mild steel pressed handles, oval type, stove enamelled black
S & F Mild steel pressed handles, oval type, stove enamelled black
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded
All as above but without glazing bars.
Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples
M&L 25 mm dia curtain rod mild steel powder colour coated fancy type with fixing arrangement for window and door the length shall be 450mm longer than opening size all specified and directed by Engr -in charge.
S&F Waste pipe coupling of PTMT (Half of full thread ).(minimum weight 32mm 45gm/40gm-60gm)
S&F Grating doom 100 mm dia of PTMT (Minimum weight 25gms)
S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.
S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.
S&F Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore pipe,in repair.
S&F Bib taps cast copper alloy ,chromium plated, fancy type, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, in repair.
S&F 15mm dia Pillar taps Fancy type cast copper alloy with capstan head,CP screwed down high pressure, with or without lettered 'Hot'&'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S&F Vitreous China urinals half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe
S&F vitreous China squatting pan‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and pvc waste pip complete all as specified
S&F PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.
S&F 500Ltr capacity PVC water storage tank triple layer sintex, rotex, rhino, (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I.
S&F ball valves, high pressure,with polythene float and flynut, 20mm bore complete all as specified.
S&F 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete.
S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls
S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches
S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access
S&F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed.
S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door.
PVC (SWR) vent cowl 75mm dia.
M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement.
M&L for CI nahani trap 75 mm dia with grating including Each joint to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Engr-in-charge.
Dismantling wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation ards/slabs/blankets, any thickness including cover fillets. all as specified and directed by Engr-in-charge.
Dismantling boarding, any description, fixed in any position with nails all as specified and directed by Engr-in-charge.
Demolition of brick work built in cement mortar of any description.
Dismantling floor, hearth or wall tiles including cement mortar bedding complete.
Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters ) exc 1.5 sqm but n exc 4 sqm each and removing from site.
Taking down chowkats with shutters (without taking off shutters from the frame) n exc. 1.50 sqm each & removing from site.
M & L for 15 mm thick rendering on other fair faces of brick work or concrete surfaces in CM 1:6, rendering finishes even and smooth (without using extra cement) complete all as specified.
M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, on external wall finished even and fair mixer with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacture and in the propartion indicated all as specified.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete.
M&L for Vitrified ceramic tiles dark coloured area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in flooring, set & jointed in neat cement slurry and pointed in white or colured cement to match over and incl 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.
All as per item above but on vertical surface such as skirting, dados, risers to steps, etc., set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M & L for Second class clean sawn soft-wood in scantlings unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
All as per item above but except timber complete all as specified and directed.
M & L 2nd class soft wood wall/ceiling paneling of good quality wood planed one side and edge tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall paneling 15 mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. Note :- Frame work shall be measured & paid separately.
M & L pergo tiles wooden mat finish of size (1200x200x7-8mm) laid over & including PVC foam 5 mm thick with SR adhesive over & including 50 micron polythene sheet complete all as directed by Engr-in-Charge.
M & L PVC paneling for wall/ceiling complete all as specified and directd by Engr-in-Charge.
S & F for 12mm thick plain toughened glass fixed on aluminium frame with glass door handle(IGH-11),glass connector (IGC-1), patch fittings & door closing(IPF-2), device & locks ( all are made of high grade stainless steel grade S.S.304 ( make of fitting:Insta)) including, iteching , carving as directed by Engineer -in -Charge.
S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete.
S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area exc 0.5 Sqm in each pane complete.
S & F Mild Steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Eng-in-Charge.
Fabrication & fitting cabinet/ shelves & wardrobe/ cupboard made out of 18 mm thick PVC board plain colour & laminated sheet with piano hinges (sheet shall be laminated over PVC board with solvent adhesiv at external faces) with handles/ door shutters all as specified and directed. NOTE : PVC sheet fittings & fixture will be measured and paid seperately as supply only.
Supply only 18 mm thick solid PVC board one side prelam sheet colour (Saluca sheet) of Make : Rajshree or equivalent all as specified and approved by Accepting Officer laminated with suitable cement solvent adhesive for shutter/ kitchen cabinet/ cup-boards/ partition wall/ wall cabinet and similar complete.
Supply only 100 mm size Double action spring brass, with phosphor bronze wire spring, bright polished hinges complete all as specified and directed.
Supply only 150 mm dia brass handles, cast type, polished bright finish complete all as specified and directed.
Vitreous china counter top wash and basin, oval type, of size 560mm x 410mm with chromium plated waste coupling long shank type, PVC waste pipe 32 mm bore 600mm long, fixed in repairs, complete all as specified and directed.
Vitreous china one peice European type water closet of size 700mm x 370mm x 760mm and making necessary connection to drain or out going pipe fixed on floor, fixed in repairs, complete all as specified and directed.
Central hole basin/sink mixer, 15mm bore, with popup waste, chromium plated, screwed down for galvanised iron pipes, fixed in repairs, complete all as specified and directed.
Wall mixture, 15mm bore, with telephonic shower arrangement chromium plated, screwed down for galvanised iron pipes, fixed in repairs, complete all as specified and directed.
Chromium plated brass shower rose 125 mm long, fancy type with swivel joints fixed to 15mm bore pipe, fixed in repairs, complete all as specified and directed.
S& F in repair chromium plated towel rack with lower hanger ,brass raling , including brass screw complete all as specified and directed.
S&F in repair brass chromium plated toilet paper holde complete all as specified and directed
S& F in repair chromium plated towel ring including brass screw complete all as specified and directed.
S & F in repair Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc. complete all as specified and directed.
S & F for clean sawn 25mm thick 2nd class softwood with butt joints boarding, fixed with nails in any situation complete all as specified and directed
Grating round 100 mm dia of CP (minimum weight 100 gms) fixed in repair complete.
S & F stainless steel drappery or curtain rods, 25 mm dia, with end brackets, decorative type, cut to length as required size, colour coating including matching socketed brackets, complete all as specified and directed.
Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store
Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store
Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil all as directed and specified by Eng-in-Charge.
M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.
M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in CM 1:6 all as specified and directed by Eng-in-Charge.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
M & L PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggreate) as in coping incl necessary forwork weathering, slightly rounded or chamfered angles as directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.
Rough excavation not exc. 1.5 m deep and getting out in hard/ dense soil
Removal of excavated material and depositing where directed at a level n. exc. 1.5 m above the starting point beyond 500 m and upto a total distance of 1.5 Km.
Construction of 10 users septic tank (brick construction) including excavation in soft/ loose soil foundation in PCC 1:2:4, type B-1 ( using 20mm graded crushed stone aggregate) brick masonry in CM 1:4 RCC (M-30 design Mix) slab including cast iron manhole cover having 6mm plate embedded all around with angle iron frame vent shaft etc, complete, all as specified and shown on drawing No CESZ/TD-01/1086/2015
Construction of soakage well (brick masonry) of 1.2m internal dia and 3.00m deep below inlet level incl necessary earth work, filling with brick bats of gauge 40 to 80mm, SWG inlet pipe junction 150mm bore including all other relevant works, complete, all as specified and shown on drawing No.CESZ/TD-1104/2015
M&L SGSW 150mm dia SGSW pipe line laid in trenches and jointed all as specified.
M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe all as specified.
M&L for machine pressed precast concrete, rubberised finished, interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thick M-35 grade with grey cement and no pigment over 30mm thick sand filing under floors or pavers complete all as specified and directed.
Removing excavated material and depositng where directed at a level n.exc. 1.5 m above the starting point beyond 50m and upto a total distance of 1 Km
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, Bracke sketch fitting, ceiling roses, lamp holders, brackets, pendants, regulators, sockets, light fitting etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by EIC. Note:- The damaged surfaces to be made good with plastering (1:6). & applying colour wash in required coats to matching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible.
M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit ISI maked heavy duty for one light fan/bell point controlled by one switch including modular cover plate of suitable way matching with surrounding modular boxes with suitable size including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS cable as continous earthwire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
All as per item above but MODULAR call bell point complete all as specified and directed.
All as per item above but MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
All as per item above but MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed.
All as per item above but MODULAR 15/16 Amps socket outlet on inependent board with 2.5 sqmm copper conducter FRLS cale and 2.5 sqmm PVC insulated unsheathed coper onductor cable FRLS (Green Colour) as earth lead complete all as specified and directed.
S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.
M & L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals all as specified and as directed.
S & F Modular switch 1 way 6 A, 1 module complete all as specified and directed.
S & F Modular switch 1 way 16A, 1 module complete all as specified and directed.
S & F Modular Socket 6A/16A - 2/3 pin combined 3 module complete all as specified and directed.
S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular fan step regulator 120W- 2 module complete all as specified and directed.
S&F Modular bell push 6 A, 1 Module, Complete all as specified and directed
S & F Bell Ding Dong AC,230 Volts, Single pole complete all as specified and directed by E-in-C.
S&F in replacement mirror light 10 Watt LED 2' length prewired with all accessories including lamp and connected electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor 3core cable of size 0.50Sqmm.
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp complete with drivers, holders, x 7.5 W LED filament lamp LHFOAJD1TZ1I060 9405 including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing Decorative bed side lamp, brushed nickel finish fixture with acrylic diffuser suitable with complete with drivers, holders, 7.5 W LED filament lamp LHFOAJE1TN1I060 9405 1291.00 including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing Decorative, surface mounted conical shape fixture 7.5 W A60 LED Filament Lamp Black LHFXAGP1TN1K007 9405 drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and Install of the electric water heater storage 25 Ltr capacity 5 Star rated of Stainless Steel body vertical type glass lined of inner tank and heating element and having the wall mounting arrangement,thermostate,indicators and thermally insulated stainless steel tank of glass lined inside the tank and heating element, PTMT connection pipe of 15mm dia and mounting on wall with suitable size of anchor bolts with complete connection of water & testing and all as specified and directed. Make- Havells Puro Turbo DX/ Racold / Bajaj
S&F LED smart Lamp, B22 type, 14 watt, complete all as specified and directed.
S&F 20W surface / wall mounted batten LED luminair, extruded aluminium housing with PC diffuser and ind electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete including 20W LED tube rod with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directedories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete Make of LED Fitting:- CROMPTON DMLN1LT8-16 or Technocommercially equivalent to Philips/ GE.
S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified. Make :- CROMPTON CAT Part No. LBHP-10-CDL
M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
Supply and fixing, testing and connecting the star rated ceiling fan 230 volts,single phase of 1200mm sweep double bearing type with including down rod,canopy cover etc and connecting with 3core flexible copper conductor of 0.50 sq mm and including writing of MES No with black enamelled paint as per directed by engr-in-Charge.Make-Orient/Bajaj/CG
S&F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
S&F MCB SP 240V, 50Hz, 10 KA, 'B' curve of rating 6 to 32 Amp all as specified and directed.
S&F MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 6-32 Amp all as specified and directed.
M&L sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps complete all as spd and directed. Make:- Hager/ Legrand/ ABB
M&L for sub Main Wiring with 2 run of single core, 6 Sqmm FRLS PVC insulated and unsheathed, multi starndedcopper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm FRLS PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm (ISI marked) with and including all accessories complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed. Note: Two run of submain wire (phase and neutral), and one run of earth including PVC conduit and accessories will be measured as one run.
S&F building secuirty light fitting energy saving high efficiency LED street light fitting 30 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. Make: CROMPTON CAT REF. LSTS-30-CDL or technocommercially equivalent to Philips/ Wipro.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as showin in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregrate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. Note :- The rate quoted include cost of min 7.5 metre earthing wire.
M&L Point wiring with 1.5 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and incl PVC PVC casing and capping (ISI Marked) suitable size with all accessories having thickness not less than 1.8mm incl sheet steel/ CI terminal box of adequate size having thickness not less than 2mm including 3mm thick hylem/masonite sheet including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor multistranded cable of green colour as earth conductor connected to common earth dolly complete all as specified and directed for one light / fan point controlled by one switch 5 Amp, SP, one way, 240 Volts. Note: 1. Connections of cable with MCBs/Switch Sockets shall be done through proper size copper/brass thimbles. 2. Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit in not feasible. 3. Proper colour code will be used for wiring as per the electrical rule and as directed.
All as per item above but for one 5 pin 5 Amp socket outlet point on inependent board controlled by one switch SP, one way 5 Amp, 240Volts.
All as per item above but wiring with 2.5 Sqmm copper wire (FRLS) and 1.5 Sqmm earth wire for one 6 pin 15 Amp socket outlet point on inependent board controlled by one switch.
Supply and fixing LED light fitting 1 x 18 W, 220 Volt AC decorative box type with driver, holders, LED tube light suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
S & F switch piano flush button single pole one way 5 Amp AC 240 volts, all as specified and as directed.
S & F Switch socket combination 5 in 1, 5 pin 15 amps flush type 240 volts complete all as specified and directed.
S & F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.
S&F of sheet metal enclosure MCB distribution board, Single door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
S&F in replacement of 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 10 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:L4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.
M/S RJ BUILDERS
M/S ASMATULLAH SHAH
M/S SAJAA CONSTRUCTION COMAPNY
M/S LONE CONSTRUCTION COMPANY
M/S AK CONSTRUCTION
Bidder Name
M/S RJ BUILDERS
M/S SAJAA CONSTRUCTION COMAPNY
M/S ASMATULLAH SHAH
POPULARHARDWARESTORE
M/S AK CONSTRUCTION
M/S LONE CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .