Construction work of 5x4 m span RCC box culvert and 1-90 km additional approach road on Samaspur drain in the middle of village Samaspur Kanhaua road

Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Including all Taxes and Labour cess but Excluding GST.

Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 I. Sand filling. Including all Taxes and Labour cess but Excluding GST.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I.P.C.C grade M 10 (i)Nominal mix 1:3:6 Including all Taxes and Labour cess but Excluding GST.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications Including all Taxes and Labour cess but Excluding GST.

RCC Grade M25 Plain/Reinforced Cement Concrete, in Well Foundation complete as per Drawing and Technical Specification. Including all Taxes and Labour cess but Excluding GST.

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications Including all Taxes and Labour cess but Excluding GST.

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 I)Granular material Including all Taxes and Labour cess but Excluding GST.

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.Including all Taxes and Labour cess but Excluding GST.

TRAFFIC SIGNS - HAZARD MARKER (LEFT & Right) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing Including all Taxes and Labour cess but Excluding GST.

Road Marking with HotApplied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. Including all Taxes and Labour cess but Excluding GST.

Road Delinator Supplying and instalation of delinators (road way indicators, hazard markers, object marker) 80-100 cm. high above ground level, painted black and white in 15 cm. wide strips, fitted with 80x100 mm rectangular or 75 mm dia circular reflectorised panel at the top buried or pressed into the ground and conforming to IRC:79 and the drawing. Including all Taxes and Labour cess but Excluding GST.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 iv)800 mm x600 mm rectangular Including all Taxes and Labour cess but Excluding GST.

Reflective Raise Pavement Markers (Road Studs/Cat Eye) Supply and fixing of reflective rasised pavement marker with its body surface made of though ASA (acrylic styrene acroniline or HIPS (Hi impact polystyrene) or acryloninle butadiens styrence (ABS) the marker shall supported a load of 1333 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses confanining single or dual prismatc cubes of providing total internal feflection of the light entering the lens face Retro reflecting surface shall preferably be 35d 4th to base and area of each retro- reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of idenfification of the manufacturer dimensions of road studs should not be less than 100 mm x 100 mm x10 mm. RPM (with shank) as per ASTM Including all Taxes and Labour cess but Excluding GST.

Construction of embankment with approved material obtained from availble land as permitted and approved by Engineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1, with all lifts and leads, spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 Including all taxes and labour cess but excluding GST

Granular Sub-base with Well Graded Material (Table 400.1) (A)By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. Including all taxes and labour cess but excluding GST

Cement Treated Subbase (GSB)- Providing, laying and spreading Material on a prepared sub grade, adding cement @ 2% by weight to the spread Material manually, mixing in place with rotavator and compaction with the road roller at OMC to achieve the desired unconfined ompressive strength and to form a layer of sub-base.( By Manual) Including all taxes and labour cess but excluding GST

Cement Treated Base (W.M.M.) Providing, laying and spreading material on a prepared sub base,adding Cement at site @ 4% by weight to the spread material manually mixing in place with rotavator and compacting with road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of Base (By Manual). Including all taxes and labour cess but excluding GST

Construction of Shoulder (Parti) with approved material obtained from availble land as permitted and approved by Engineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1, with all lifts and leads, spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 Including all taxes and labour cess but excluding GST

Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. Including Biumen, all taxes and labour cess but excluding GST

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per Technical Specification Clause 508. Including Biumen, all taxes and labour cess but excluding GST

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 A.By Manual Means Including Biumen, all taxes and labour cess but excluding GST

Plain cement concrete 1:3:6 norminal mix in foundation with crushed aggregate 40 mm nominal size mechanically mixed placed in foundation and compected by vibration including curing for 14 days complete & Technical Specification as per Section 2100 of MoRD specification. Including all taxes and labour cess but excluding GST

Brick masonry work in 1:3 cement mortar in foundation complete excluding pointing and plastering as per drawing and technical speficiations as per Section 1300,2200 of MoRD Specification. Including all taxes and labour cess but excluding GST

Pointing with cement and fine sand of 1.25 fineness modulus morter on stone work in proportion of 1:3 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.as per MoRD specification 1312. Including all taxes and labour cess but excluding GST

Laying 350 mm dia reinforced cement concrement pipe for culverts on first class bedding of granular material in single row including fixing collar with cement motar 1:2 but excluding excavation,protection works,back filling,concrete and masonary works in head walls and parapetsIncluding all taxes and labour cess but excluding GST

Laying 1000 mm dia (NP-3) Laying reinforced cement concrement pipe for culverts on first class bedding of granular material in single row including fixing collar with cement motar 1:2 but excluding excavation,protection works,back filling,concrete and masonary works in head walls and parapets Including all taxes and labour cess but excluding GST

Please Enable Macros to View BoQ information