Providing Maintenance and adding other Infrastructure Facilities at Art park

Amount

CIVIL WORKS

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. a. All kinds of soil

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering,shuttering and finishing : a. All works upto plinth level

Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in foundation and plinth size of blocks (40 x 20 x 15)

Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. (b) In tees, angles, flats and channels

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

18mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) 1 meter long, 1 cm wide

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield , APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. (b) Cherry Red

Providing & laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or/and residual bitumen applied hot at 1.45 1.20 and 1.7kg., per sq.m. of area respectively second and fourth course of roofing felt type 3 grade 1 (hessian based self finished bitumen felt ) & sixth and final course of stone grit 6 mm and down size or grade gravel spread at 0.008 cu.m per sq. m excluding grading complete.

Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations.

Providing and fixing 15cm wide 45cm overall semi-circular plain G.I. sheets gutter with iron brackets 40 x 3 mm bolts nuts and washers etc., including making necessary connection with rain water pipe complete as per design.

Providing flashings 35 cm overall in plain G.I. sheet fixed with gavalnized iron j or l hooks, bolts and nuts G.I. limpet & bitumen washer complete bent to shape and fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand).

Proving ridges or hips of width 60 cm over all in plain G.I. sheet fixed with galvanized iron J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

Providing & fixing Two Track sliding window in economical section made out of 60mm x 45mm x 2.5mm Upvc multi cavity track section & Shutter made out of 57mm x 31mm x2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Economical) is 12.25 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Repainting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work of statues of human sized musicians along with Musical instruments of fiber material such as ,Ghumod, Tabla, Harmonium, Veena Violin etc as well as of 3D wall murals on walls of the required shape and design of cement or fibreglass material on walls as directed as the engineer in charge. including cleaning the surface with water etc. complete.

Repainting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work of abstract form made of concrete of different sizes as mentioned as per the directions of the engineer incharge. (a)4 feet, 3 feet, finger on lips 5ft, big sculpture 4mtr

Supplying,providing & applying of special paint for Tree House using scaffolding and Minor Repair Work as designed by the architect in charge

Repainting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work of existing pergola by the architect in incharge

Repainting and touch up of Existing Wall Painting on Exposed walls of Security Room Front and Back with one coat of paint including painting of new walls to the entrance of the rooms

Providing a Adjustable ladder 10ft for cleaning pergola and tree house etc, as directed by the architect in charge.

Replace of existing door and windows for ease in access and closure .

Supplying and fixing of Drinking water cold and normal water cooler of USHA stainless steel(Ss4080)etc

Supplying of furniture for Art Park (a) Chairs & tablels

Provding and fixing of Chain Fencing with lock for tree house stairs

Providing & applying of special paint & repair of entrance top ART PARK name using scaffolding as directed by the architect in charge

Supplying of whiteboard Drywipe magnetic with pen tray and aliminium trim, includes 6 magnets, 1 eraser, and 2 dry erase markers 2.95 ft x 1.96 ft(W x H)

ELECTRICAL WORKS

Supplying of high pressure washer pump for cleaning purpose such as above shades/ during rains. (model of - Bosch 06008A7DF0 advanced aquatek 140 high pressure washer, 2100watt)

Supplying, Providing of Lawn cutting machine (Sharpex 1800W Electric lawn mover 16inch blade) as directed by the architect in charge.

Supplying and providing of 2HP booster pump along with accessories for gardening work

Supplying of water fountain cleaning equipments

Supply, installation, testing and commissioning of LED BUSH SPOT LIGHT WITH SPIKE LUMINARES IP-65 CODE NO (112146, BGSBL 9 WATTS LED WW WARM WHITE.BAJAJ MAKE or equivalent

Supply, installation, testing and commissioning of 10W LED floodlight fixture with pressure die cast housing with individual LEDs with modular secondary optics and IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device,CCT(K) 3000K. Make Havells,wipro, phillips, legero as required and directed by engineer incharge.

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete of make Wipro, Phillips, Havells, Panasonic as directed by the engineer incharge.

Supply of Can Lights for Art park Output Power 164W Combination Lighting 3W 54 (3-IN-1) RGB LED

Supply ,Installation,Testing & Commisioning of 3W step light IP Rating : IP 65 complete with all accessories, driver / power supply (if any), connecting wire, including gear box and junction box for cable connection Complete with all required accessories Similar to Phillips, havells, wipro, Legero as directed by the engineer incharge.

Supply, installation, testing and commissioning of 12W Underwater Lights near fountain pool. Light colour Blue

Supply, installation, testing and commissioning of 40W LED floodlight fixture with pressure die cast housing with individual LEDs with modular secondary optics and IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device,CCT(K) 3000K. Make Havells,wipro, phillips, legero as required and directed by engineer incharge.

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size 4 Core 2.5 sq.mm.

Supply, testing and commissioning of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel PVC conduit or casing caping, including dismantling, removing old wires as required. (a) 3 x 1.5 sq.mm

Supply, testing and commissioning of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel PVC conduit or casing caping, including dismantling, removing old wires as required. (a) 3 x 2.5 sq.mm

Supply,testing and commissioning of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (a) Cat 6

Supply,testing and commissioning of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size 4 Core 10 sq.mm

Supply, installation, testing and commissioning of Panel Box Contactor. rating 4A 415V 50Hz

Supply, installation, testing and commissioning of following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) (b) 8 way single door Cat A

Supply, installation, testing and commissioning of 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required (a) SP, Cat A

Supply, installation, testing and commissioning of 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (c) DP, Cat A

Supply, installation, testing and commissioning of 12 inch (300mm sweep) exhaust fan, 1400 rpm, complete with all accesorries (a) Cat A.

Supply, installation, testing and commissioning of following piano type switch/ socket on the existing switch box/ cover including connections etc. as required (a) 5/6 A switch.

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (d) 3 pin 5/6 A socket outlet Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (e) 6 pin 15/16 A socket outlet Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (c) 6 Module (200mm x 75 mm) Cat A.

Supply, installation, testing and commissioning of Wall mount Fan

SITC of Cable Junction Boxes IP 66/67 “weather proof”(Size - 450 x 300 (LXB)mm + Cable termination upto 25 Sqmm size.), for outdoor installation(with knockouts for cable entry) with bracket for mounting andall accessories of make hensel as directed by the engineer incharge.

Supply of 12W Underwater Light Driver near fountain pool Driver Rating - Input 180-265V AC, 50Hz Output 24vdc 5 Amp

Supply, installation, testing and commissioning Dome camera, Switch TP-Link 8 PORT (LS100810/100MBPS)

Supply, installation, testing and commissioning of Havells Light 36W Driver. driver Make Philips

Supply, installation, testing and commissioning of Panel Box near Fountain Pool. Lenth 2*2 ft.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required (a) In soily strata/.

abdul khadar