Renovation work of Tea Lounge and recording studio in library at ground floor IIPA

S.No. Description of Works

(DSR in Rs.) (MR in Rs.)

A Renovation work of Tea Lounge at

II Electrical 2,97,535.00 6,09,570.50

III Fire & PA 2,16,634.00 -

B Renovation work Recording Studio in

library at ground floor

II Electrical 2,26,932.00 3,71,808.74

IV Funitur - 4,15,980.46

GRAND TOTAL A+B 92,75,130.92

GRAND TOTAL A+B 92,75,130.92

Digitally signed by AMIT

BOQ FOR RENOVATION WORKS OF TEA LOUNGE AT IIPA, NEW DELHI

Sr. No. DSR No. Description Unit Quantity DSR Rate NDSR Rate DSR Amount NSDR Amount

Dismantling steel work in built up sections in angles, tees, flats and channels

1 15.18 including all gusset plates, bolts, nuts, cutting rivets, welding etc. including KG 299.05 5.65 1,689.63

dismembering and stacking within 50 metres lead.

Dismantling C.I. pipes including excavation and refilling trenches after taking out

the pipes, manually/ by mechanical means breaking lead caulked joints, melting of

lead and making into blocks including stacking of pipes & lead at site within 50

metre lead as per direction of Engineer-in-charge:

Dismantling stone slab dado laid in cement mortar including stacking of

serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantalling of PVC/ plywood wall panelling including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead.

Demolishing brick work manually / by mechanical means including stacking of

5 15.7 serviceable material and disposal of unserviceable material within 50 metres lead

as per direction of Engineer-in-Charge.

15.7.4 In cement mortar CUM 2.20 2,060.20 4,532.44

Dismantling doors, windows and clerestory windows (steel or wood) shutter

6 15.12 including chowkhats, architrave, holdfasts etc. complete and stacking within 50

15.12.2 Of area beyond 3 sq. metres EACH 3.00 502.75 1,508.25

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to

approved municipal dumping ground or as approved by Engineer-in-charge,

beyond 50 m initial lead, for all leads including all lifts involved.

Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

2 11.3 aggregate) finished with a floating coat of neat cement, including cement slurry, but

excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 140.00 614.20 85,988.00

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half

brick wall of mix.

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm

4 MR-3 thick POP Punning over cement plaster in line & plumb finished smooth to receive SQM 420.00 301.40 0.00 1,26,588.00

paint. (Internal surfaces of walls).

Providing and applying fibre reinforced elastomeric liquid water proofing

membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105

on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1)

1 22.22A and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of sqm 140.00 563.10 78,834.00

complete application/system not less than 500 microns). The operation shall be

carried out after scrapping and properly cleaning the surface to remove loose

particles with wire brushes, complete in all respect as per the direction of Engineer-

Providing & Applying polymer modified, flexible cementatious negative side

waterproofing coating with elastic waterproofing polymers on interior wall plaster

surface in three coats @14.35 kg /10 sqm. one coat of self priming of

cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two

coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 )

after scrapping and properly cleaning the surface to remove pre-existing paint film

& loose particles till plaster is visible, complete in all respect as per the direction of

Engineer-in-Charge.

Marble stone flooring with 18 mm thick marble stone, as per sample of marble

approved by Engineer-in-charge, over 20 mm (average) thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry,

including rubbing and polishing complete with :

11.23.1 Makrana white second quality SQM 100.00 3,737.45 3,73,745.00

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20

mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with white cement and matching

pigments etc. The tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm

1 7.38 thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in

white cement with an admixture of pigment to match the stone shade.

7.38.1 8mm thick (mirror polished and machine cut edge)

7.38.1.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble SQM 60.00 2,766.45 1,65,987.00

Providing and fixing of terracota jaalis on wall as per approved design and sample

2 MR-4 at all levels complete including all fixing accessories as required complete in all SQM 20.00 2,700.00 54,000.00

respects as per instructions of engineer-in-charge.

Providing and laying Vitrified tiles in dado in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours and

shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing

3 MR-5 with grey cement slurry @3.3 kg/sqm including grouting the joints with white SQM 48.00 1,900.00 91,200.00

cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for placing the tiles

gently and easily.

Digitally signed by AMIT

Sr. No. DSR No. Description Unit Quantity DSR Rate NDSR Rate DSR Amount NSDR Amount

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive)

as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with

1 12.45 nuts & bolts of required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,

to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

Including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the cost of

painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing S4 multi perforated linear custom made CNC Cut (as per architect

design) hook-on ceiling System. The panels are made to

1200/1800(L)x300/600(W) manufactured out of minimum 0.6 mm thick GMS and

hooked on the shorter side. Panels has to be powder coated in selected RAL finish

with minimum 60 microns paint thickness. Panels has to be CNC cut Multi

staggered perforation ranging from 40-60mm dia holes in special designs

approved by architect having acoustic tissue at the back with minimum 0.5 NRC.

All panels are hooked onto a secondary grid known as U1005 installed at shorter

side of the panel to ensure individual demounting of panels for easy accessibility of

2 MR-6 services . A primary grid of perforated L- Angle in 30x30x1.2mm thick galvanized SQM 100.00 6,717.00 6,71,700.00

steel known as U1040 is installed perpendicularly to hook on profiles at maximum

centers at 1200mm. The entire ceiling shall be suspended with M6 threaded rod

using Hilti M6 fastener with minimum load of at least 0.5kn per anchor. The

suspension system shall be as per manufacturer specification . The panels shall

include the site cutting / making openings for services e.g. lights for information

boards, smoke detectors, speakers, diffusers, grills etc. Measurement to be done

on edge to edge basis without any deductions for AC grills or any other services

integrated within the false ceilings. The color of finish ceiling will finalized as per

direction of engineering -in-charge.

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with hold fast lugs

or with dash fasteners of required dia & length ( hold fast lugs or dash fastener

shall be paid for separately).

9.1.1 Second class teak wood CUM 0.15 1,42,949.70 21,442.46

UPVC Windows : Supply and Fixing of Tripple Track/ Tripple Channel Factory

made UPVC Windows along with DGU/ Sandvich Glasses (6 mm Reflective Glass

2 MR-7 + 12 mm Air Gap + 6 mm Plain Toughned Glass) on two tracks and SS Mesh on SQM 62.00 14,806.00 9,17,972.00

One Track inclding all required hardware i.e. handles, locks and other

etc., complete as per the requirement of engineer in charge.

STILE DOOR - Providing & Fixing of Double shutter Stile Door System having size

of 75*45 with Door Frame formed out of 45* 40mm / 50*50mm of 6063-T6 Vargin

grade duly Anodized Aluminium, including 10 mm Toughened Glass. The cost to

3 MR-8 include hardware like Door Closure, 4nos Hinges, Lever Handle with mortice lock, Nos 20.00 9,250.00 1,85,000.00

Door Seal & Gaskets etc. in approved shade and design as per architectural

drawings and instructions of the architect. The size of door shall be upto 1500mm

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to

IS : 2202 (Part I) non-decorative type, core of block board construction with frame

of 1st class hard wood and well matched commercial 3 ply veneering with vertical

grains or cross bands and face veneers on both faces of shutters :

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for Providing and fixing flush doors with decorative veneering instead of non

decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)

9.22.1 On one side only SQM 7.20 478.00 3,441.60

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

on all edges of flush door shutters (over all area of door shutter to be measured)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10

mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate

20mm nominal size).

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle

8 MR-9 TH 123 with Roses & Escutcheon in SS packaged with Mortice lockset 55mm EACH 2.00 3,415.00 6,830.00

backset, 20 SS forend, SS strike plate and EP Cylinder for all flush doors.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked,

9 9.97 anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ), transparent

or dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor

door stopper with necessary screws, etc. complete.

Wall painting with acrylic emulsion paint, having VOC content less that 50 grams /

1 13.82 litre, of approved brand and manufacture, including appliying additional coats

wherever required, to achive even shade and colour.

Providing & fixing customised decorative Poly décor fabric Wall Paper (on walls

2 MR-10 and ceiling) of weight 475 g /sqm as per approved shade & design including SQM 10.00 4,800.00 48,000.00

prepration of surface with 2 coats of Nubin Glue based epoxy quote.

Steel work welded in built up sections / framed work, including cutting, hoisting,

3 10.25 fixing in position and applying a priming coat of approved steel primer using

structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Digitally signed by AMIT

Sr. No. DSR No. Description Unit Quantity DSR Rate NDSR Rate DSR Amount NSDR Amount

Providing and fixing 6mm thick poly-carbonate sheet with 40% transparency as per

vendor and to be matched with existing on roof of the attrium including cost of

removing of existing roof sheet and dumping/ storing the same as per instruction of

Project in charge, including cost of all necessary fixing arrangement, framing

wherever required complete with all respect as per manufecturer details and

specification and instruction of Project in charge/ Architect. (the cost to including

scaffolding). The cost to include dismantalling of existing roof sheet and disposing

it to nearest duping yard.

Painting with synthetic enamel paint of approved brand and manufacture to give an

13.61.1 Two or more coats on new work SQM 700.00 155.90 1,09,130.00

Preparation of complete set of shop drawings including finishing, MEP services,

details, design calcualtions etc. and any other details as and when desired by

Engineer In charge /client. A qualified professsional for the purpose shall be

appointed after due appproval from Engineer In Charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side,

up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre,

horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube

challies, M.S. clamps and M.S. staircase system in the scaffolding for working

platform etc. and maintaining it in a serviceable condition for the required duration

as approved and removing it there after .The scaffolding system shall be stiffened

7 MR-13 with bracings, runners, connection with the building etc wherever required for SQM 480.00 338.25 1,62,360.00

inspection of work at required locations with essential safety features for the

workmen etc. complete as per directions and approval of Engineerin- charge .The

elevational area of the scaffolding shall be measured for payment purpose .The

payment will be made once irrespective of duration of scaffolding. Note: - This item

to be used for maintenance work judicially, necessary deduction for scaffolding in

the existing item to be done.

Supply , installation ,testing and commissioning of 'MCB double door

Distribution Boards dust and vermin 'proof protected and AC supply operation

including incoming MCB/ELCB/RCBO/MCCB as per specifications and required

capacity Neutral bar and Earth Terminal complete as required and installed in

concealed in wall after necessary chase cutting with finishing /surface on wall

including all fixing materials required.

12Way TPN MCB DB(Vertical type) with 63A 4P RCCBas incoming and 36 nos (6-

32A-10KA )SP MCB as outgoing.(ACDB)

2 1.1 KV Cabling

Supply installation, testing and commissioning of following sizes of PVC sheathed

PVC/XLPE insulated Aluminium conductor / copper conductor power / multicore

control armoured cable of 1.1 KV grade on wall, or in existing cable tray /masonry

ducts/hume pipe with fixing hardware etc as required.

4 C x 25 Sq.mm XLPE Al. cable

3 Cable Termination RM 60 625.00 37,500.00

Supply and making end termination with brass single compression glands for the

following PVC insulated PVC sheathed & armoured 1100 V grade cable including

cost of crimping lugs/ferrules, compression glands, solder, cable sockets,

insulation tape etc complete as required.

4 C x 25 Sq.mm XLPE Al. cable Nos. 2 350.00 700.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of

1100 V grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded

copper wires, in & including 25 mm dia , MS conduit surface/ concealed in wall /

ceiling conferming to IS 732 including all accessries such as junction boxes ,

conduit bends, elbows and ceiling rose , and anodised GI switch box with modular

switch ,modular plate and the box covered with front plate

One light point controlled by one 6A switch

Secondary light point controlled by same switch

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

5 1.7 FRLS PVC insulated copper conductor, single core cable in surface/ recessed

steel conduit as required.

2x1.5sqmm+1x1.5sqmmearth wire Per

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per

2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC

insulated copper conductor cable drawn through 25 dia MS conduit laid in

6 1.4 surface/concealed over false ceiling or in slab/wall chases including ,2way modular Per Pts 15.00 1,981.00 29,715.00

switches,modular plate ,suitable GI box and earthing the point with 1.5 sqm FRLS

PVC insulated copper conductor single core cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate

& switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base &

cover plate for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular

metal boxes etc. as required.

1.20 Supply and fixing of following sizes of MS conduit along with accessories in

10 surface /recess including painting in case of surface conduit,or cutting the wall

and making good the same in case of recessed conduit as required

Providing and fixing of round 12W COB Light with aluminium body and heat sink as

Providing and fixing of round 24W COB Light with aluminium body and heat sink as

Digitally signed by AMIT

Sr. No. DSR No. Description Unit Quantity DSR Rate NDSR Rate DSR Amount NSDR Amount

Supply, Installation, Testing and Commisioning of Suspended /surface/Recessed

High Efficiency 16-18W per meter Suspended LED Channel, in all

shapes/patterns, Body made of Aluminium and Opal Diffuser with homogeneous

light distribution and without hotspots, System power , 40W, 230V, 2385X52X85H

mm, Color Temperature 3000K/4000K/5700K, CRI>80, IP20, IK04, operating

13 MR-19 voltage range 140-270Vac, operating temperature -10° to 45°C, PF>0.95, rmt 47.00 5,800.00 2,72,600.00

THD<10%, product efficacy>110lm/W, SDCM<5, L70B50@50000hrs, LED binning

as per ANSI Bin C78.377A, 110° shall be luminaire beam angle, drivers efficiency

>86%, internal surge protection of >3.5kV, LED make - Bridgelux, Seoul, Osram,

Cree, The manufacturer shall provide LM79, LM80, TM21, Photoboilogical safety

as per IEC 62471, RoHS complaint, BIS both for fixture and drivers.

Supply, installation, testing and commissioning of 500 CFM in-line fan for ventilation

Total Electrical 2,97,535.00 6,09,570.50

Supplying, installation, testing & commissioning of intelligent analog addressable Pcs 18.00 2,858.00

photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of addressable manual call point Pcs 1.00 3,871.00

complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe Pcs 1.00 3,506.00

complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base Pcs 1.00 3,270.00

Supplying, installation, testing & commissioning of response indicator on Pcs 1.00 276.00

19 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all 276.00

connections etc as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated RM 180.00 173.00

20 17.5.2 with annealed copper conductor having XLPE insulation, steel wire armouring & 31,140.00

FRLS outer sheath complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, Pcs 1.00 96,779.00

25V rms operating at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud Pcs 6.00 2,428.00

speaker, 3/1.5 Watt in ABS enclosure complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor

17.5.3 cable in the existing surface / recessed steel conduit of following pairs, cores and

size including connections and interconnections etc. as required.

23 17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 120.00 54.00 6,480.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all RM 100.00 53.00

ancillaries and accessories like coupler etc. as required.

Total Fire fighting 2,16,634.00 0.00

B GRAND TOTAL 55,07,175.33

B GRAND TOTAL 55,07,175.33

Digitally signed by AMIT

No. MARKET Market

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

2023/2022/ RATE AMOUNT

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

2 15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 80.00 113.35 9,068.00

Demolishing brick work manually / by mechanical means including

stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-Charge.

Dismantling doors, windows and clerestory windows (steel or wood)

5 15.12 shutter including chowkhats, architrave, holdfasts etc. complete and

stacking within 50 metres lead:

6 15.12.2 Of area beyond 3 sq. metres EACH 5.00 502.75 2,513.75

Disposal of building rubbish / malba / similar unserviceable, dismantled

or waste materials by mechanical means, including loading,

7 15.60 transporting, unloading to approved municipal dumping ground or as cum 10.00 263.95 2,639.50

approved by Engineer-in-charge, beyond 50 m initial lead, for all leads

including all lifts involved.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

8 11.3 stone aggregate) finished with a floating coat of neat cement, including

cement slurry, but excluding the cost of nosing of steps etc. complete.

9 11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 10.00 614.20 6,142.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class

10 6.4 designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

11 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 5.00 8,512.10 42,560.50

CEMENT PLASTER :- 15 mm cement plaster on the rough side of

single or half brick wall of mix.

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to

14 MR-1 15mm thick POP Punning over cement plaster in line & plumb finished SQM 0.00 305.00

smooth to receive paint. (Internal surfaces of walls).

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases up to floor

five level excluding the cost of centering, shuttering, finishing and

reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal

17 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 4.00 736.40 2,945.60

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

19 5.22A.4 Hot rolled deformed bars kg 40.00 107.85 4,314.00

Providing and applying fibre reinforced elastomeric liquid water proofing

membrane with resilient acrylic polymers having Sun Reflectivity Index

(SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10

sqm. One coat of self-priming of elastomeric waterproofing liquid

(dilution with water in the ratio of 3:1) and two coats of undiluted

elastomeric waterproofing liquid (dry film thickness of complete

application/system not less than 500 microns). The operation shall be

carried out after scrapping and properly cleaning the surface to remove

loose particles with wire brushes, complete in all respect as per the

direction of Engineer-in-Charge.

Providing & Applying polymer modified, flexible cementatious negative

side waterproofing coating with elastic waterproofing polymers on

interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat

of self priming of cementatious waterproofing polymer(dilution with

21 22.23A water in the ratio of 1:1) and two coats of cementatious waterproofing sqm 35.00 447.35 15,657.25

polymer (dilution with water in the ratio of 3:1 ) after scrapping and

properly cleaning the surface to remove pre-existing paint film & loose

particles till plaster is visible, complete in all respect as per the direction

of Engineer-in-Charge.

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including

rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Digitally signed by AMIT

No. MARKET Market

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

2023/2022/ RATE AMOUNT

Polished Granite stone slab colour of Black, Cherry/Ruby Red or

Supply of modular carpet of approved model and shade and made with

100% nylon 6/6.6 tufted textured tiles of minimum 500mm x 500mm in

size, stain resistant, anti microbial, and having colour fastness to water,

fastness to light, rubbing fastness and castor chair suitability as per

relevant standard for heavy commercial usage, with 100% PVC free

Wellbac Function Backing with having average density 6000 oz/cu. yd.

or more,Nominal total thickness of 5.9mm, and Pile weight – 16-18 oz/

sq yard. Material shall be CRI GREEN LABEL PLUS certified, and shall

have recycled content complying to GRIHA requirement, including

fixing with GRIHA compliant adhesive of approved make, minimum 15

years manufacturer's warrantee, all complete as per drawings,

manufacturer's specifications and direction of Engineer in Charge.

Providing and fixing of 75-100mm high aluminium skirting fixed on wall

including all required accessories complete.

PANELLING- Panelling using 12mm thick, fire rated ply fixed on one

side on Aluminium Frame 50mm x 25mm x 1.5mm as per approved

sample and architectural drawings. Aluminium frame to be fixed to

walls, floor and RCC Ceiling using fastners.

PARTITIONING- Partition using 12mm HDHMR board fixed on both

sides on aluminium Studs Frame 50mm x 50mm x 1.5mm & 50mm x

27 MR-5 60mm x 1.5mm as per approved sample and architectural drawings SQM 12.00 2,940.00 35,280.00

placing the same 600mm c/c . Aluminuim frame to be fixed to floor and

RCC Ceiling using fastners.

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/

28 MR-6 Natural Veneer of approved design and shade, cladded on to existing SQM 44.00 2,556.00 1,12,464.00

partitioning. (base rate Rs. 1450/- sqm)

Polishing in high gloss/matt finish melamine clear polish on wood work

in required color/wooden shade texture with following process in the

sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and

then with sand paper of 160/180 nos. 2. Applying two coats of sealer

with spray gun and allowing sufficient drying time for 1st coat and 2nd

coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer

grading with ample water to remove excess sealer layer and make the

surface further smooth after this wet rubbing, then surface is applied

with special grade melamine fillers to fill all the small and big

holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on

which again a light wet rubbing is done this surface is further allowed to

dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using

melamine clear polish and melamine thinner in required proportion. This

1st coat is allowed to dry for 24 hrs then this dry surface is again fine

wet rubbed smooth, which is further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor pressure spray gun using

melamine clear polish and melamine thinner mixed in required

proportion complete as per direction of Engineer-in-Charge. (Final coat

to be done in 1 or 2 layers without gap of time.)

Providing and supplying Acoustical Wall Paneling with square edges

made of fibre glass substrate 9 mm thick and wrapped on the front side

with an acoustically transparent and classified for Fire reaction Class A

30 MR-7 as per ASTM E-84, fabric as per the selection of the Architect of SQM 30.00 5,165.00 0.00 1,54,950.00

approved size providing a minimum sound absorption level of 0.85

NRC to be affixed to wall using Wall panel impalers and construction

adhesives as per the instructions laid down by the manufacturer.

Digitally signed by AMIT

No. MARKET Market

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

2023/2022/ RATE AMOUNT

Providing and Fixing of Channeled Woodworks perforated panels

Custom Perforated of width 192mm, thickness of 17mm and length

2440 mm , made of a HDHMR FR Grade board with minimum 860

Kg/M3 density substrate with a laminated facing as per the approved

shade & finish and a melamine balancing layer on the reverse side.

The boards shall have a special perforation pattern of 3mm width

Custom Perforaton of visible panel each. The edges of the panels shall

be “tongue-and-grooved” to receive special clips for installation. The

back of the perforated panel shall have sound absorbing non-woven

acoustical fleece having NRC of 0.60. The panels shall be mounted on

31 MR-8 special aluminium splines (keel) using clips provided by manufacturer. SQM 60.00 10,598.00 0.00 6,35,880.00

Screw the aluminium extruded keel for channelled woodworks provided

by manufacturer over the solid wall/ surface an on-centre distance of

600mm. Place the inside clip on the groove end of the panel along the

Al keel and then place the tongue end of the next panel. Continue

installing rows of panels by inserting the tongue into the groove of the

earlier inserted panel and progressively installing inside clips into the

next keel till the actual height is achieved. Installation to be carried out

by Trained Installation team & Installation should be carried out as per

manufacturer recommended procedure.

GYPBOARD CEILING :- Providing and fixing false ceiling at all height

including providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm

and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required

32 12.45 length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each

having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing

tapes , finishing with jointing compound in 3 layers covering upto 150

mm on both sides of joint and two coats of primer suitable for board, all

33 as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS:

300MM X 1200MM MINERAL FIBRE GRID - Providing and fixing of

mineral fiber ceiling tiles, with hot dipped galvanized steel grid work

(Silhotte) , surface chemically cleaned capping pre-finished in baked

polyester paint, Main Tees of size 38 (H) x 15 mm every 1.2M centre to

centre, centre to centre to form a grid of size 1200 X 300 mm and

suspending the grid from RCC roof using 3 mm GI rod, 6 mm nylon

35 MR-7 rawl plug and 6mm J bolt at every 1200 mm intervals. And laying SQM 45.00 3,372.00 1,51,740.00

mineral fiber Acoustic ceiling tiles MV B-Pin of size 1200 x 300 x 20

OCR mm over the formed grid having fire rating of 60 minutes as per

BS 47G / 23 of 1987. Light Reflection of > 85%. Noise Reduction

Coefficient (NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57

W/mk. Humidity Resistance up to 99% at 50’C. The grid to be used is

Silhoutte type as per approval of the architect

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band

all round the mineral fibre/ gypsum ceiling. In order to make the Mineral

36 MR-8 Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto 100mm RMT 30.01 358.00 10,741.79

as per drawings. (visible surface of gypsum band to not exceed

100mm) including plastic emulsion paint.

CEILING PELMETS :- Providing and fixed pelmet of overall size

150mmx150mm and made hardwood framings hung from ceiling

37 MR-9 @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on RMT 8.00 1,425.00 11,400.00

vertical & 12mm thk. Commercial ply on horizontal surface (straight &

curved). Inclusive of finishing in Paint.

Digitally signed by AMIT

No. MARKET Market

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

2023/2022/ RATE AMOUNT

STILE DOOR - Providing & Fixing of Double shutter Stile Door System

having size of 75*45 with Door Frame formed out of 45* 40mm /

50*50mm of 6063-T6 Vargin grade duly Anodized Aluminium, including

10 mm Toughened Glass. The cost to include hardware like Door

Closure, 4nos Hinges, Lever Handle with mortice lock, Door Seal &

Gaskets etc. in approved shade and design as per architectural

drawings and instructions of the architect. The size of door shall be

upto 1500mm X 2400mm.

UPVC Windows : Supply and Fixing of Tripple Track/ Tripple

Channel Factory made UPVC Windows along with DGU/ Sandvich

Glasses (6 mm Reflective Glass + 12 mm Air Gap + 6 mm Plain

Toughned Glass) on two tracks and SS Mesh on One Track inclding all

required hardware i.e. handles, locks and other etc.,

complete as per the requirement of engineer in charge.

40 13.46 Finishing walls with acrylic smooth exterior paint of required shade:

New Work (two or more coat applied @ 1.67 Ltr/ 10 sqm over and

including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm)

HONEYCOMB BLINDS -Original Non-woven honeycomb shades

having soft fabric appearance and high energy-efficient fabric with high

tear strength constructed out of Anti static, anti-UV, damp proof,

resilient, colour fast & Sanitized Treat 100% spun bonded non-woven

polyester fibre & precision manufacture to form a hexagonally shaped

cell . Cell size 3Ú4”Honeycomb structure with dis nct air pocket for

energy efficiency and increased insula on. Shadings are single tone

facing both exterior and interior .Being a Low shading co-efficient will

have following Comfort rating & solar optical properties. Aluminium

profile should have temper WP consisting of alloy 63400 along with

anodizing of 10 micron and powder coating of 60 micron. The tensile

strenghth of profile should be 9.10 Kg/mm square and elongation

18.The control clutch drive unit engineered heavy duty chain drive

42 MR-12 pulley operating system consisting of gear clutch housing and locking SQM 12.00 13,176.00 1,58,112.00

plug containing minimum 6 ribs and inserted at minimum of 38mm into

roller tube. It is self-lubricating Exclusive clutch with safety pins for

secure bracket installation and unlocking pin for quick manual removal.

Universal clutch is most convenient for large windows down to the

smallest windows. It shall be driven by a ball chain pulley with ball chain

and can be positioned at Right hand or Left hand side of the shade.

Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds..

Mounting hardware brackets universal brackets including end plug

bracket with lock down retainer device. Brackets finish of powder

coated metal installation brackets made of stamped and hardened

steel. Roller tube circular-shaped aluminium tube extruded from alloy

63400 and temper WP. Bottom rail flat-shaped extruded aluminium

from alloy 63400 and temper WP. Ball chain shall be 2mm diameter

Preparation of complete set of shop drawings including finishing, MEP

services, details, design calcualtions etc. and any other details as and

43 MR-13 when desired by Engineer In charge /client. A qualified professsional for LS 1.00 43,858.00 43,858.00

the purpose shall be appointed after due appproval from Engineer In

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved

make and colour using approved Adhesive to 12 mm thk. Waterproof

Plywood of approved brand as per shape, pattern & details given in the

44 MR-14 drawing. The rate includes providing & fixing beading, cutting, SQM 4.50 16,006.00 0.00 72,027.00

scaffolding, nails, all materials, labour, lead, lifts, HOM etc., complete.-

for Lift Cladding. (The make, Shade, pattern etc., to be approved by

Supplying, installation, testing & commissioning of intelligent analog Pcs 2,846.00

45 17.2.4 addressable photothermal detector complete with mounting base 4.00 11,384.00 0.00

complete as required.

Supplying, installation, testing & commissioning of addressable manual Pcs 3,859.00

call point complete as required.

Supplying, installation, testing & commissioning of addressable horn Pcs 3,494.00

cum strobe complete as required.

Supplying, installation, testing & commissioning of fault isolator Pcs 3,257.00

complete with base as required.

Supplying, installation, testing & commissioning of response indicator Pcs 263.00

49 17.2.5 on surface/recessed MS Box having two LED, metallic cover complete 2.00 526.00 0.00

with all connections etc as required.

50 CABLES & ACCESSORIES FOR FAS : 0.00 0.00

Digitally signed by AMIT

No. MARKET Market

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

2023/2022/ RATE AMOUNT

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, RM 141.00

600/1000V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of ceiling/wall mounted Pcs 2,416.00

53 17.3.4 loud speaker, 3/1.5 Watt in ABS enclosure complete as required. 2.00 4,832.00 0.00

54 CABLE & ACCESSORIES FOR PA SYSTEM 0.00 0.00

Supplying and drawing of cable Fire Retardant PVC insulated copper

conductor cable in the existing surface / recessed steel conduit of

following pairs, cores and size including connections and

interconnections etc. as required..

56 17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 60.00 51.00 3,060.00 0.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating RM 50.00

57 17.5.4 along with all ancillaries and accessories like coupler etc. as required. 80.00 4,000.00 0.00

Total Fire & PA 46,731.00 0.00

58 DISTRIBUTION BOARD 0.00 0.00

59 DISTRIBUTION BOARD 0.00 0.00

Supply , installation ,testing and commissioning of 'MCB double door

Distribution Boards dust and vermin 'proof protected and AC supply

operation including incoming MCB/ELCB/RCBO/MCCB as per

60 specifications and required capacity Neutral bar and Earth Terminal 0.00 0.00

complete as required and installed in concealed in wall after necessary

chase cutting with finishing /surface on wall including all fixing materials

12Way TPN MCB DB(Vertical type) with 63A 4P RCCBas incoming

and 36 nos (6-32A-10KA )SP MCB as outgoing.(ACDB)

12Way SPN MCB DB with 40A DP RCCBas incoming and 10nos (16-

20A-10KA )SP MCB as outgoing.(For Server)

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using

2 runs of 1100 V grade 1.5 sqmm & one run of 1.5 sq.mm FRLS

insulated multistranded copper wires, in & including 25 mm dia , MS

64 conduit surface/ concealed in wall / ceiling conferming to IS 732 0.00 0.00

including all accessries such as junction boxes , conduit bends, elbows

and ceiling rose , and anodised GI switch box with modular switch

,modular plate and the box covered with front plate

65 1.3.3 One light point controlled by one 6A switch Per Pts 20.00 1,845.00 36,900.00 0.00

66 1.54.3 Secondary light point controlled by same switch Per Pts 30.00 1,094.00 32,820.00 0.00

Wiring for circuit/ submain wiring alongwith earth wire with the following

67 1.7 sizes of FRLS PVC insulated copper conductor, single core cable in 0.00 0.00

surface/ recessed steel conduit as required.

68 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 80.00 327.00 26,160.00 0.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor

FRLS PVC insulated copper conductor cable drawn through 25 dia MS

conduit laid in surface/concealed over false ceiling or in slab/wall

chases including ,2way modular switches,modular plate ,suitable GI

box and earthing the point with 1.5 sqm FRLS PVC insulated copper

conductor single core cable as required

Supplying and fixing following modular switch/ socket on the existing

72 1.24 modular plate & switch box including connections but excluding 0.00 0.00

modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular

base & cover plate for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing

modular metal boxes etc. as required.

Digitally signed by AMIT

No. MARKET Market

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

2023/2022/ RATE AMOUNT

Supply and fixing of following sizes of MS conduit along with

accessories in surface /recess including painting in case of surface

conduit,or cutting the wall and making good the same in case of

recessed conduit as required

83 LIGHTING FIXTURES 0.00 0.00

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt with

Lumen output of 3600 lumen. The product should be SMD based and

have non integral isolated driver with 2KV inbuilt surge protection.

84 MR-17 THD<10%, PF >0.9,Product should have life class of 50K burning hour Nos. 28.00 7,744.00 0.00 2,16,832.00

at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal

wiring should have teflon coted multi strand wires and external wire

should have PVC coated multistrand wires.

SITC of 7W Recessed Fixed LED Spotlight, Body made of high grade

di-cast Aluminium, System Power 7W, 230V, CRI>80, Dia- 68mm X

65 H mm, cut out Dia 60mm color temperature 3000K/4000K/5700K,

Hi- Precision optics with Beam Angle 15°/24°/36°, IP20, IK02, operating

voltage range 140-270Vac, operating temperature -10° to 45°C,

PF>0.95, THD<10%, product efficacy>100lm/W, SDCM<5,

L70B50@50000hrs, LED binning as per ANSI Bin C78.377A, drivers

efficiency >86%, internal surge protection of >2kV. The manufacturer

shall provide LM79, LM80, TM21, Photoboilogical safety as per IEC

62471, RoHS complaint, BIS both for fixture and drivers.

Providing and fixing of magnetic Track TR 1124, Body made of

Aluminium with 4 wire track for Phase/ Nuetral, Earth , Thre Phase

86 MR-19 240V power Supply or Phase/ Nuetral/ 2 Dimming , single phase supply Nos. 4.00 5,057.00 0.00 20,228.00

with length 1 Mtr 35X20mm in approved finish to house magnetic track

light (light to be paid seprately)

Providing and fixing of magnetic LED Tracklight, Body made of

Aluminium and Anodised Reflector , and driver housed in Plastic

87 MR-20 enclosure, System Power 12W, 230V, CRI>80, Dia45 X 150 mm, Nos. 12.00 4,177.00 0.00 50,124.00

color temperature 3000K/4000K/5700K, Hi- Precision optics with Beam

angle 15°/24°/40° . The light shall be tuneable with DALI driver.

Total Electrical 2,26,932.00 3,71,808.74

Supply Installation, Testing & Commissioning of modular type Variable

Refrigerant Flow/ Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling and heating, having all hermetically sealed inverter

type Scroll Compressor(s), minimum two compressors for above 14 HP

modules, microprocessor based Controller, top discharge type

condensing unit(s), with R410A Refrigerant, vibration isolators, with

88 1.1 suitable foundation etc. complete as required.The unit shall deliver the Per HP 12.00 16,415.00 1,96,980.00 0.00

rated capacity at AHRI Conditions and work even at 50°C ambient

temperature without tripping.The unit shall be suitable to work on

400V+/-10%, 3 Phase, 50Hz AC power supply.The unit shall be filled

with first charge of the refrigerant and ready for use as required.The

COP at AHRI conditions shall not be less than 3.1 and IEER not less

89 INDOOR UNIT 0.00 0.00

Supply, installation, testing and commissioning of following minimum

capacity 4-wayflow VRV/ VRF Cassette Type Indoor ceiling mounted

unit equipped with synthetic washable media pre-filter, fan section with

low noise fan/ dynamically balanced blower, multi speed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet,

90 2 drain pump, grill, necessary supports, vibration isolation, cordless 0.00 0.00

remote control etc., suitable for operation on single phase 230V±10%,

50 HzAC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inl et

conditions of 27 Degree CD Band 19 Degree CWB temperature.

91 4-Way Cassette type 0.00 0.00

93 REFRIGERANT PIPING 0.00 0.00

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of soft/

hard drawn copper refrigerant piping for VRV/ VRF system, complete

with fittings, with suitable adjustable ring type hanger supports, jointing/

94 brazing including accessories, insulated with XPLE Class-O tubular 0.00 0.00

insulation/ with Class-O closed cell elastometric nitrile rubber tubular

sleeves sections of specified thickness as given below for Suction and

Liquidlines, all accessories as per specifications etc. as required :

95 5.4 15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm) Rmt 10.00 588.00 5,880.00 0.00

98 CONDENSATE DRAIN UPVC PIPE 0.00

Digitally signed0.00

No. MARKET Market

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

2023/2022/ RATE AMOUNT

Supply, installation, testing and commissioning of uPVC Pipe

,complete with fittings, supports,U trap arrangement,Clean Plug with

6mm nitrile insulation and accessories as per specifications, drawings.

102 MR-22 Imported fittings Y-joints and headers etc. Nos 2.00 10,601.00 0.00 21,201.99

104 Control & Trasmission Wiring 0.00 0.00

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. Mtr

105 MR-23 mm copper in suitable conduits between indoor and outdoor unit. 40.00 161.59 0.00 6,463.61

Providing and placing in place curved table of depth upto 0.6m and

height upto 0.75m. The table shall be made out of 19mm thick

commercial plywood and veneer cladding and melamin polish as per

approved sample. The table to be made in 3 parts with provision to use

it as individual tables complete as per detail drawings and instructions

of engineer-in-charge.

Providing and placing of high back chair, cushioned seat assembly,

moulded plywood upholstered with moulded polyurethane foam &

finished with mesh fabric Back size: (W) 450 - 500 mm (H) 600-

620mm; Seat size: (L) 450mm - 500mm (W) 450 - 500mm with

Polyurethane Foam. Polyurethane Foam: The polyurethane foam

(Recyclable) of minimum density = 30 kg/ cum + 2 kg/cum fixed to

moulded plywood and upholstered with mesh .4Darmrest of premium

quality of SS Chromed finish with PU cushion pads. Synchro

mechanism: 360 degree revolving type, from pivot for tilt with multiple

locking position & feet resting on ground for extra comfort. The

pneumatic adjustment has an adjustment stroke of 70-120 mm, and

self weight mechanism Pedestal Assembly: should have 5 star

107 MR-25 aluminium die cast with hard castors sutable for tiles flooring with Each 4.00 35,400.00 0.00 1,41,600.00

adjustment, twin wheel castors & the pitch centre Dia is 650 +/- 50mm.

(750 +/- 10mm with castors). Twin wheel castors: these are made of

injection moulded in black PP having 50-60mm dia,complete in all

respect. The above chair should be finished / completed as per above

mentioned specifications including providing and fixing of other related

materials including hardwares, etc. complete or as directed by the

Engineer-in-Charge and conforming to the image having back

curvature in longitudinal and in trasverse direction as per the image. All

complete as per manufacturers specification. Product should be BIFMA

gold rated SCSglobal certified for inhouse air quality.

Providing & Placing sofa, structure Pressed and molded wood,

supported by particle board with metal spring additionally. Cushion is

Molded high density foam (Polyurethane Foam) and jacketed with

fabric or vinyl or leather (optional) with stainless steel leg designed in

"U" shape. The component specification shall be as follows Seat - 40-

45Kg/cum density PU Foam, 100mm thick, Back – 32 - 40Kg/cum

108 density PU foam, 50mm thick, Sides (inside) - 32-40 Kg/cum density 0.00 0.00

PU Foam, 11mm thick Sides (outside) & back (back side) - 35-40 Kg

cum density PU foam, 13mm thick. Seat shell rest on MS Powder

Coated / Chrome Finish Legs supported solid wooden section of height

50-220mm. Product should be BIFMA gold rated SCSglobal certified for

inhouse air quality and with 05 years warranty

3 seater sofa overall dimension - 1970mm W x 860mm D x 800mm H 55,000.00

1 seater sofa overall dimension - 820mm W x 860mm D x 800mm H 32,000.00

Providing and placing Center & Corner table made of Particle board

Grade E-1(Environmental Friendly), thickness 25mm cover with

Melamine finish and 2mm thk PVC Edge banding. The understructure

is made of 25mm thk particle board with 2mm thk PVC Edge banding in

Melamine finish.

E1 grade laminate with zero urea formaldehyde emissions (<or=

8mg/100 g oven dry board-perforated method) for better in-house

quality. This should comply with (EN 120-1992).

Product should be BIFMA gold rated SCSglobal certified for inhouse air

112 MR-28 Centre table Size - 1200mm W x 600mm D x 365mm H Each 1.00 15,930.00 15,930.00

113 MR-29 Side table Size - 600mm W x 600mm D x 365mm H Each 1.00 12,390.00 12,390.00

Digitally signed by AMIT

No. MARKET Market

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT

2023/2022/ RATE AMOUNT

Providing & Placing Medium Height Storage, Storage of height

1200mm. Body of storages made out 18 mm thick Particle Board (E-1

Grade), melamine finishes with 2 mm PVC edge-banding. E1 grade

laminate to be used which provide no urea formaldehyde emission and

formaldehyde should be phenol base with emission of not more than

(<or= 8mg/100 g oven dry board-perforated method). This should

comply with (EN 120-1992). Front of Medium height Storages should

be made out of 16 mm thick Particle Board (E-1 Grade) melamine

114 finishes with 2 mm PVC edge-banding fitted with extruded aluminum

handle, as per requirement. Top should be 25 mm thick Particle Board

(E-1 Grade), melamine finishes with 2 mm PVC edge-banding.

Storages should be provided with adjustable levelers. Door Lock should

be of three-way lock mechanism, the hinged doors can be locked at

once. Door should be provided with Hinge-damping mechanism to

enable soft closing of doors. Product should be BIFMA gold rated

SCSglobal certified for inhouse air quality and with 05 years warranty.

115 MR-30 Storage Size: 1200Wx 450D x 1200Hmm Each 2.00 ₹ 39,530 79,060.00

Total Furniture 0.00 4,15,980.46

C GRAND TOTAL 37,67,955.59

C GRAND TOTAL 37,67,955.59

Digitally signed by AMIT