Supply and fixing fountain in 80 feet community Hall.

Amount

WORKS

Designing, supply, erection, commissioning and testing of Dome fountain manufactured by ISO certified firm which shall consists following specification. 1. supply and fixing of 10ft dia inner ring dome fountain shall be made of 2" GI Class pipe having provision for fixing of 60 nos fountain nozzles including 3 nos inlet sockets. 60 nos brass made ball joint nozzles complete unit ring, leg stand, clamps are powder coated for smooth finishing work on surfaces. it also includes Required GI/upvc pipe and fitting for complete fountains set with required complete fittings as elbow, sockets, t-joints, nipples, unions, stands, clamps etc. It alson contain Manifold, Lights Stands, connection pipe etc. compete in all respect for Drain and inlet arrangments.

Designing, supply, erection, commissioning and testing of Four steps Banshi Pharpur stone fountain. The height of stone fountain shall be about 8fit and shall consists 4 nos. plates about 4ft, 3ft, 2ft and 1ft dia continually first, second, third and fourth. It shall be Manufactured by excellent machine Finish work as per approved Photo. The Fountain shall Be fixied on Platform with provision of water flow from upper side to bottam in a proper rthym. It shall also contain a bell Jet nozzle with Ball Joint on the Top of the surface. The complete required pipe shall be uPVC pipe with fittings as Mta, Fta, T-Joints, Socktes, Elbow, Solvant Etc. The Stands for Lights, Manifold shall be made of G.I. with Powder coating work on surfaces.

Providing & Fixing of S.S. 304 grade wire mesh filter for pump filtration of water at inlet of mono submersible pump. Filter made out of M.S. Sheet & Plates with inlet threaded nipple as per pump inlet. Filter complete strength and epoxy polyester coating on all surfaces.

Power Supply Transformer for Controllers and LED lights as per total load capacity about 2000W

Supply and fixing Glass Mosaic tiles of 20 X 20 X 4 mm size of approved shade and design with required adhesive over bed of 15 mm thick cement, sand mortar 1:3 including nicely finished joints. Thickness of joints shall not be more than 1.5 mm using water proof joints filler ( as recommended by manufacture ) & finished with flush pointing in white cement mixed with pigment to match the shade of tiles. Complete work as required in all respect.

Bidder Name

Amount

Electro Tech Corporation (GSTN-NA) BID ID -3114707