Loading…
Loading…
Tender Value
₹4.1 Cr
EMD Value
₹4.1 L
Closing Date
4 Jul 2026, 3:45 pm7d left
Similar tender results from the same govt authority in the past 3 years.
Chief Engineer,HMDA
7th floor, East Wing, Swarnajayanthi Complex, Ameerpet, Hyderabad-500082
The Design, Supply and Erection of the Decorative LED fixtures (complete set of 60 Watts and 120 Watts - Philips make) in place of existing LED lights fixtures for 9Mtrs and 6 Mtrs CI Pole at Tank Bund, NTR Marg, BPP Office inside area, Lumbini Parking Area, and PVNR Statue Area with 5years AMC
710383
HMDA/DEV/CE/09/2026-27, DT: 17.06.2026
OPEN
Electrical Works
HYDERABAD
1 document required · 1 mandatory
₹11,800
₹4.1 L
20 Jun 2026
20 Jun 2026
20 Jun 2026
Earth work excavation of Trench in hard ground soil up to 0.9 mtr depth, laying of U.G cables upto 50 Sq,mm and back filling of Trench including cost and conveyance of materials and labour charges, etc Complete for finished item of work and as directed by Engineer In Charge
Supply,Transportation and laying of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete.
Supply and transportation and laying of 4C X 16 Sqmm XLPE insulated 1100V grade armored aluminium cable as directed by the engineer during execution including cable end terminations and all labour charges and cost and conveyance of all materials etc complete as per the drawing enclosed etc complete for finished item of work.
Supply, Installation, testing & Commissioning of decorative/ heritage suspended luminaire with a system lumen not less than 6600 lumens with system nominal wattage not more than 60W. The luminaire efficacy should be greater than 110 lm/ W. The luminaire shall be with operating voltage 120-320V at 50hz with PF > 0.9 . The LED shall be of SMD type only with CCT 3000K-5700K and CRI shall be greater than 70. The luminaire SDCM shall be ≤ 5. The housing shall be of aluminum body sealed with a PMMA type diffuser cover protector and a crown attachment. The fixture lens should be precision engineered individual lens made of optical grade poly carbonate for maximum intensity. The light distribution to be assymetry/symmetry type as per the design. The life of luminaire shall be > 50000 hours at L70. The driver efficiency shall be > 90%. The luminarie shall have Internal surge protection of 4KV internal & 10KV external SPD housed in driver compartment. The luminaire shall be with IP 65, IK 07. Additional features of the driver are as follows the luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 320V and have an auto recovery feature, Under voltage protection at 120V,Short Circuit Protection with automatic recovery, Thermal Fold-back Protection, Output ripple current <5% The luminaire shall comply to IS 10322, IEC 60598. The luminaire working temperature shall be 0◦ to +45◦C. e luminaire shall be BIS certified. Similar to BGP564 G2 series of 60W. Makes: Philips
Supply, Installation, testing & Commissioning of decorative/heritage suspended luminaire with a system lumen not less than 13200 lumens with system nominal wattage not more than 120W. The luminaire efficacy should be greater than 110 lm/ W. The luminaire shall be with operating voltage 120-320V at 50hz with PF > 0.9 . The LED shall be of SMD type only with CCT 3000K-5700K and CRI shall be greater than 70. The luminaire SDCM shall be ≤ 5. The housing shall be of aluminum body sealed with a PMMA type diffuser cover protector and a crown attachment. The fixture lens should be precision engineered individual lens made of optical grade poly carbonate for maximum intensity. The light distribution to be assymetry/symmetry type as per the design. The life of luminaire shall be > 50000 hours at L70. The driver efficiency shall be > 90%. The luminarie shall have Internal surge protection of 4KV internal & 10KV external SPD housed in driver compartment. The luminaire shall be with IP 65, IK 07. Additional features of the driver are as follows the luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 320V and have an auto recovery feature, Under voltage protection at 120V,Short Circuit Protection with automatic recovery, Thermal Fold-back Protection, Output ripple current <5% The luminaire shall comply to IS 10322, IEC 60598. The luminaire working temperature shall be 0◦ to +45◦C. e lumniare shall be BIS certified. Similar to BGP564 G2 series of 120W Makes: Philips
Supply of 6-32A SP MCB 10 kA, C/D Curve ISI Mark. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK Exora / BCH / Havells Stadx, Complete for finished item of work and as directed by Engineer In Charge
Hydraulic Truck Crane hire Charges for 16 Ton
Granite Cutting and Relaying of Granite
Annual Comprehensive Maintenance of LED Street Lighting with CI Poles 6 Mtrs & 9 Mtrs both Tank Bund, NTR Marg, BPP Office inside area, Lumbini Parking Area, and PVNR Statue Area which is including Cables, Suitable drivers & MCBs etc,.with 2 Nos Skilled Electricians and 2 Nos Semi skilled Electricians. (including 5 Years DLP Period(DLP), along with the provision and maintenance of 5% spare quantity of materials for replacement during the DLP period )
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
NTR & Tank Bund Philips BOQ-FINAL.xlsx
TENDER_DOCUMENT • 0.01 MB
Tender docmNec,TB lighting -FINAL.docx
TENDER_DOCUMENT • 0.27 MB
Download all tender documents and submit your bid