Development of Sri Dr. Manmohan Singh Junction at Wipro Circle, Financial District Hyderabad ( Phase-II)

Supply & Transportation of Dr.Manmohan Singh Statue made of Traditional Bronze Finish with Oxidation of height 14 Feet complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Supply and delivery of UPVC Raising Column Pipes for submersible motors with both ends square hreaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs eights. Makes : Ashirvad / Finolex / Waterflo / Apollo / Falcon / Hindware Nominal diameter of Standard 88 / 80 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 00 Mts complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-chargefor irrigation at Wipro Circle For Man Mohan singh Memorial

Supply and delivery of UPVC Raising Column Pipes for submersible motors with both ends quare hreaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs eights. Makes : Ashirvad / inolex / Waterflo / Apollo / Falcon / Hindware Nominal diameter of Standard 75 / 65 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial

Supply and delivery of UPVC Raising Column Pipes for submersible motors with both ends square hreaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs eights. Makes : Ashirvad / inolex / Waterflo / Apollo / Falcon / Hindware Nominal diameter of Standard 60 / 50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial

Supply and delivery of UPVC Raising Column Pipes for submersible motors with both ends square hreaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs eights. Makes : Ashirvad / Finolex / Waterflo / Apollo / Falcon / Hindware Nominal diameter of Standard 48 / 40mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial

Supply and delivery of UPVC Raising Column Pipes for submersible motors with both ends square hreaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs eights. Makes : Ashirvad / inolex / Waterflo / Apollo / Falcon / HindwareNominal diameter of Standard 42 / 32mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial

Earthwork excavation for road way in soil by mechanical means including cutting and pushing the earth to side of embankment upto a lead of 100 metres including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete for finished item of work for trench cutting as per MOR&H specification No.301 and as directed by the Engineer-in-Charge for irrigation at Wipro Circle For Man Mohan singh Memorial

Supply, Fixing & Commissioning of flexible 16mm inline tubing PC Drippers with pressure compensating, self flushing mechanism, resistance to UV damage, algae growth brown in colour, Longer lateral run lengh with flow rate 2lph / 4.0 lph, pressure rating 0.58 to 4 bar , Dripper Spacing at 30 cm / 45 cm Spacing wall thickness 1.1mm to 1.2mm etc., complete, as per the instructions of /Engineer In Charge. for irrigation at Wipro Circle For Man Mohan singh Memorial for DRIP & ACCESSORIES

Supply,Fixing & commissioning of 9 - Gauge Galvanized Steel Rod Comes Sharp tips provide easy insertion into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides. Corrosion Resistant of TIE DOWN STAKE etc., complete, as per the instructions of Engineer In Charge. for irrigation at Wipro Circle For Man Mohan singh Memorial for DRIP & ACCESSORIES

Supply,Fixing & commissioning of Pop up spray head1804 SAM PRS Series Spray bodies, with Rotary nozzle having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap and features an encased plastic 'cage' to provide unmatched resitence to grit, nozzle having capable of covering 2.4m -7.3m at 1.4 - 3.8 Bars pressure, True flushing mechanism,Thick streams and large water droplet & Low precipitation rate and the enviroment. Additionally, the pressure-activated, multi-function seal design assures a positive seal without excess'flow-by'which enables more heads to be installed on the same valve, Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic. Pop spray body shall with stand upto 4.8 bar. Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressureves programmable by station; up to 5 with LX-IVM • Optional Weather Sensors are programmable by station to preven for irrigation at Wipro Circle For Man Mohan singh Memorial for SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4" bottom inlet. Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal The sprinkler shall have Plus (PL) Flow shut off, 45 psi pressure regulator with flow optimizer technology, internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy duty, ABS plastic.O-ring Slip Clutch,Racheting Slip Clutch,Side Inlet Available 6" and 12",Turret-mounted ID Plugs,Flow Stop Available,Non- potable water indication available etc., complete, as per the instructions of Engineer In Charge for irrigation at Wipro Circle For Man Mohan singh Memorial. for SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly , 12" Length . The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic etc., complete, as per the instructions of Engineer In Charge..SA Series. for irrigation at Wipro Circle For Man Mohan singh Memorial. for SPRINKLERS & ACCESSORIES

Supply and Fixing Electro Fusion Tapping saddle complying with BS EN 12201-3-2011, PN 12.5 rating & WRAS approved raw material as per BS 6920, manufactured from virgin resin of PE-80/PE-100 having blue/black colour using food grade compounded raw material for usage in drinking water system and having working pressure of 10 bar. The cost shall include testing of all materials, labour, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking, providing and fixing etc. Complete as specified and directed by the Departmental Engineers, but excluding of all taxes. 63x1/2” complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial. for SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of 6"Round box with greenlid with features Snap-in overlapping lid, Skid- resistant lid texture,, Body built with three ridges for additional support to sidewallst & Having Dimensions @ Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, as per the nstructions of /Engineer In Charge.for irrigation at Wipro Circle For Man Mohan singh Memorial. for VALVES & ACCESSORIES

Supply,Fixing & commissioning of 10" Round Valve Box with greenlid with features of Overlapping lid with bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support & Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. for irrigation at Wipro Circle For Man Mohan singh Memorial. for VALVES & ACCESSORIES

Supply,Fixing & commissioning of 12" Rectangular Standard Valve Box features, Drop-in lockable lid, Skid- resistant lid texture, Double ledge lid support, Ridge adds additional support to sidewalls & having Dimensions @ TTop Opening: 15" L x 9 ½" W Bottom Opening: 18" L x 12 ½" W x 10" H etc., complete, as per the instructions of Engineer In Charge. for irrigation at Wipro Circle For Man Mohan singh Memorial. for VALVES & ACCESSORIES

Supply,Fixing & commissioning of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, as per the instructions of Engineer In Charge. for irrigation at Wipro Circle For Man Mohan singh Memorial. for VALVES & ACCESSORIES

Supply,Fixing & commissioning of 3/4th inch Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring etc., complete, as per the instructions of Engineer In Charge. for irrigation at Wipro Circle For Man Mohan singh Memorial. for VALVES & ACCESSORIES

Supply,Fixing & commissioning of 2.5" Disc Filter with capacity 40m3/Hr having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 10 Bars etc., complete, as per the instructions of Engineer In Charge. ARMAS for irrigation at Wipro Circle For Man Mohan singh Memorial for FILTRATION UNIT

Supply and delivery of UPVC Raising Column Pipes for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights. Makes : Ashirvad / Finolex / Waterflo / Apollo / Falcon / Hindware Nominal diameter of Standard 88 / 80 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for irrigation at Wipro Circle For Man Mohan singh Memorial for FILTRATION UNIT

Supply and Transportation of star rated5hpThree hase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / yenvarsha / Lubi / Falcon 12-16 stage complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial. For PUMPING UNIT

Supply and Transportation of control panel for three phase submersible motors above 7.5 HP to 12.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable ontactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors ssembled with ISI mark ontactors and fitted with Legrand make ISI mark MCB etc., complete. complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial. For PUMPING UNIT

Supply of6sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010 specification for Copper cable. Makes : RPG / Anchor / Power Flex / Sun Cab / / Benlo / Gemini / Unistar / Windsor / Payal / SPM / Elleys / Fybros complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial. For PUMPING UNIT

Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, onforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar 45mm dia for irrigation at Wipro Circle For Man Mohan singh Memorial. For PUMPING UNIT

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indianmakeheavytype-80mm NBSize complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial. For PUMPING UNIT

manufacture, supply and delivery of Single Chamber DI Air Valve 25 mm( screwed end)with Body and cover in Ductile Iron of grade GGG 40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2 1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept. complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge for irrigation at Wipro Circle For Man Mohan singh Memorial. For PUMPING UNIT

Supply,Fixing & Commissioning of 14 Awg x 2 Maxi Jackated Direct Burrial Irrigation Automation Cable. Tin coated copper conductors, insulated with PVC and having a high density polyethylene direct burial jacket.Conductor - Soft annealed tin coated solid copper conforming to ASTM B-33. Insulation: Polyvinyl Chloride conforming to UL Standard 493 for TYPE UF/TWU rated 75°C. Outer Jacket: Pressure Extruded High Density PE conforming to ICEA S-61-402, and NEMA WC5 Jacket Thickness 3/64" minimum jacket material to completely fill interstices between the two insulated conductors for two way communication between decoder controller and decoders complete , RAINBIRD PAIGE OR XERITECH for irrigation at Wipro Circle For Man Mohan singh Memorial. For Automation Equipments

Supply of25mmSWR reinforced Flexible Conduit Pipe. Make: Precision or its equivalet as approved by the department for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply,Fixing & commissioning Of Two wire control system without Decoder ESP-LX IVM 230V Input, DC output Irrigation Controller having Two way Communication between controller and smart valve,supports up to 60 stations standard Up to four 2-Wire paths, plus flow sensing and advanced flow management tools. supports upto 5 flow sensor inputs and removable front panel is programmable under battery power. water management features like: • Learn Flow utility and fl ow usage totalizer help optimize water usage, • FloWatch™ protection for high and low flow conditions , FloManager™ manages hydraulic demand, make full use of available water to turn on as many stations as possible without exceeding water supply and reducing the total time to complete irrigation cycles. SimulStations™ allows stations to operate at the same time; up to 8 with LX-IVM • Cycle+Soak™ by station, • Rain Delay up to 30 days, • 365-Day Calendar Day Off (up to 5 days), • Station Delay by program, • Normally Open or Normally Closed Master, Valves programmable by station; up to 5 with LX-IVM • Optional Weather Sensors are programmable by station to prevent or pause watering; up to 4 with LX-IVM. • Station Run Time: 0 min. to 96 hrs. • Seasonal Adjust: 0% to 300% (96 hrs. maximum station run time), • 10 independent programs on the ESP-LXI IVM • 8 start times per program,• Program Day Cycles include Custom days of the week, Odd, Odd no 31st, Even, and Cyclical dates,• for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply,Fixing & Commissioning of IVM-SOL Interfaces ( Integrated Valve Module) "Smart Solenoid - Field Device'' DC output with interface module in-built in one device mountable on Solenoid Valve to connect Controller and Valve on two wire path & it provides two-way communication between the valve and controller to provide advanced diagnostic capability and faster response time as per specifications complete. for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply,Fixing & Commissioning of IVM-OUT Interfaces with LX-IVM to manage 3rd party valves and external gear such as pump stations as per specifications complete for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply,Fixing & Commissioning of IVM-SD for surge protection on the 2-Wire path as required with copper grounding rod, clamps, charcoal and all requisite accessories as per specifications complete for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply,Fixing & commissioning of 1" Solenoid globe angle inlet Valves with provision to attach DC Latched interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 40GPM ,max water temp. upto 42degree centigrade without AC Coil & provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply,Fixing & commissioning of 2" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphram Material and rugged PVC durable glass -filled nylon construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, without AC Coil & provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply,Fixing & commissioning of PRS-DIAL Pressure Regulator to Maintain constant outlet pressure between 1.04 to6.9 KSC for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply,Fixing & commissioning of WATERMARK Soil Moisture Sensor, The WATERMARK sensor is a resistive device that responds to changes in soil moisture. Once planted in the soil, it exchanges water with the surrounding soil thus staying in equilibrium with it. , as per specifications complete for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Supply of 5kva Stabilizer Makes : V-Guard / Real Guard / Uni Stab / ITL. for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply,Fixing & Commissioning of IVM-SEN nterfaces with LX-IVM to control weather sensors or flow sensors as per specifications complete including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for irrigation at Wipro Circle For Man Mohan singh Memorial For Automation Equipments

Earthwork excavation for road way in soil by mechanical means including cutting and pushing the earth to side of embankment upto a lead of 100 metres including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete for finished item of work for trench cutting as per MOR&H specification No.301 and as directed by the Engineer-in-Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial

Supplying, fixing and testing of PVC Foamcore pipes (SN8) for soil, waste water confirming to IS16098 with lubricated rubber ringfit joints inclusive of all necessary specials like bends, tees, offsets, shoes , Y fittings , cowls , etc., complete. The quoted rate shall include necessary excavation, bedding, back filling, etc. complete in all respects. including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial Piping in UG level 160mm dia

Supplying, fixing and testing of PVC Foamcore pipes (SN8) for soil, waste water confirming to IS16098 with lubricated rubber ringfit joints inclusive of all necessary specials like bends, tees, offsets, shoes , Y fittings , cowls , etc., complete. The quoted rate shall include necessary excavation, bedding, back filling, etc. complete in all respects. for Drainage System at Wipro Circle For Man Mohan singh Memorial Piping in UG level 110mm dia

Supplying, fixing and testing of PVC Foamcore pipes (SN8) for rain water confirming to IS16098 with lubricated rubber ringfit joints inclusive of all necessary specials like bends, tees, offsets, shoes , Y fittings , cowls , etc., complete. The quoted rate shall include necessary excavation, bedding, back filling, etc. complete in all respects.including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial Piping in UG level 200 mm dia

Supplying, fixing and testing of PVC Foamcore pipes (SN8) for rain water confirming to IS16098 with lubricated rubber ringfit joints inclusive of all necessary specials like bends, tees, offsets, shoes , Y fittings , cowls , etc., complete. The quoted rate shall include necessary excavation, bedding, back filling, etc. complete in all respects.including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial Piping in UG level 160 mm dia

Manufacture, Supply and delivery of DI D/F Gate alves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163 -89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage.including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge Drilled as per requirement of the dept for Drainage System at Wipro Circle For Man Mohan singh Memorial 100mm dia pn16

Providing & constructing rain water recharge pits of 1200mm dia upto 3M depth as per the details given in the drawing.including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part 1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering withcementmortar1:3prop;½”thickbothinsideand outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial

F premium make CPVC Pipes of 41.30mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, onnectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc.complete for finished item of work as directed by Engineer-in-charge for Drainage System at Wipro Circle For Man Mohan singh Memorial

F premium make CPVC Pipes of 54.00mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, onnectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc.complete for finished item of work as directed by Engineer-in-charge for Drainage System at Wipro Circle For Man Mohan singh Memorial

SSupplying and fixing of CP VC ball valve 65mm dia including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge 50mm dia for Drainage System at Wipro Circle For Man Mohan singh Memorial

Supply, installation and field testing of Horizontal Woltman type hermetically sealed type water meters with IP 68 protection (PN-10/ PN-16). The meters shall be manufactured as per ISO 4064 - 1:1993 with MID marking. The meter must have passed life ycle/Endurance test from FCRI.The module should be battery operated by inbuilt. The data logger shall be capable of transmitting data on daily bases to central server through GSM/GPRS. The AMR data hourly shall be collected by MIU and stored. The MIU shall be connected to Data logger. The data logger should have inbuilt battery.The AMR meter should be capable of providing data like reverse flow, tampering, daily flow rate distribution. The System shall send alerts for blocked meter, flow rate above limit, pressure below or above limits, back flow detection. Themeters shall be installed with CI strainers. The AMR meter and battery shall carry warranty of atleast 5 years from the date of delivery/date of installation which ever is earlier.The data shall be accessable on web server as required by the Client. The rates are excluding of GST. 65mm nominal dia for Drainage System at Wipro Circle For Man Mohan singh Memorial

TBSP-G.I-06 S& F 50 mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial

Supply, Transportation and fixing of suitable pump guard set (2Nos SS), Flanges set (2 Nos) to protect and safe guard the pump and Motor from vibrations while starting and switching of the pumpset.including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge OD 80mm for Drainage System at Wipro Circle For Man Mohan singh Memorial

Supply and Transportation of star rated7.5hp 12-16 stageThree phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Flowell / Waterman / Ellen / Kirlosker / Narayani / Sai Varsha / Sterling / Duke / Samudra / Ajantha including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial FOR PUMPS

Supply of drain belt of 2mm thick PVC, having a width of 20 cm, with omega shaped grooves running down its length on one side, designed for use in sub surface drainage of sports fields in 50 meter roll The opening to the grooves shall be 0.3 mm and the grooves should have an internal diameter of 1 mm. The drain belt should be specifically designed to use capillary forces and syphonic action to drain water from saturated soils. 21mm wide slit to be made to perforated pipe to connect the drain belt to carrier pipe. The carrier pipe is uPVC Single wall corrugated perforated pipe designed for use in under-drainage of surface and sub-surface land/farms, canal, highways, roads, sports fields, building foundation, construction sites, terceptor drainage, in fields/farms, intercepting canal seepage and under-drainage offline canals etc conforming to IS 9271 having moulded as well as fabricated fittings such as coupler, Tee, Cross, Single Y, double Y & Bend. This pipe shall be wrapped with geotextile fabric and braiding shall be octagonal peripheral symmetric rangements and supplied in 100meter roll. The cost of the belt, pipes and end cap to be quoted separately. The belt and pipe to be quoted in Rmt and end caps in no of units. including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial Drain Belt (200mm Width) FOR SUBSOIL DRAINAGE SYSTEM

Supply of drain belt of 2mm thick PVC, having a width of 20 cm, with omega shaped grooves running down its length on one side, designed for use in sub surface drainage of sports fields in 50 meter roll The opening to the grooves shall be 0.3 mm and the grooves should have an internal diameter of 1 mm. The drain belt should be specifically designed to use capillary forces and syphonic action to drain water from saturated soils. 21mm wide slit to be made to perforated pipe to connect the drain belt to carrier pipe. The carrier pipe is uPVC Single wall corrugated perforated pipe designed for use in under-drainage of surface and sub-surface land/farms, canal, highways, roads, sports fields, building foundation, construction sites, terceptor drainage, in fields/farms, intercepting canal seepage and under-drainage offline canals etc conforming to IS 9271 having moulded as well as fabricated fittings such as coupler, Tee, Cross, Single Y, double Y & Bend. This pipe shall be wrapped with geotextile fabric and braiding shall be octagonal peripheral symmetric rangements and supplied in 100meter roll. The cost of the belt, pipes and end cap to be quoted separately. The belt and pipe to be quoted in Rmt and end caps in no of units.including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial Perforated Corrugated Pipe wrapped in Geofabric - 80mm FOR SUBSOIL DRAINAGE SYSTEM

Supply of drain belt of 2mm thick PVC, having a width of 20 cm, with omega shaped grooves running down its length on one side, designed for use in sub surface drainage of sports fields in 50 meter roll The opening to the grooves shall be 0.3 mm and the grooves should have an internal diameter of 1 mm. The drain belt should be specifically designed to use capillary forces and syphonic action to drain water from saturated soils. 21mm wide slit to be made to perforated pipe to connect the drain belt to carrier pipe. The carrier pipe is uPVC Single wall corrugated perforated pipe designed for use in under-drainage of surface and sub-surface land/farms, canal, highways, roads, sports fields, building foundation, construction sites, terceptor drainage, in fields/farms, intercepting canal seepage and under-drainage offline canals etc conforming to IS 9271 having moulded as well as fabricated fittings such as coupler, Tee, Cross, Single Y, double Y & Bend. This pipe shall be wrapped with geotextile fabric and braiding shall be octagonal peripheral symmetric rangements and supplied in 100meter roll. The cost of the belt, pipes and end cap to be quoted separately. The belt and pipe to be quoted in Rmt and end caps in no of units. including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial Perforated Corrugated Pipe wrapped in Geofabric - 100mm FOR SUBSOIL DRAINAGE SYSTEM

Supply of drain belt of 2mm thick PVC, having a width of 20 cm, with omega shaped grooves running down its length on one side, designed for use in sub surface drainage of sports fields in 50 meter roll The opening to the grooves shall be 0.3 mm and the grooves should have an internal diameter of 1 mm. The drain belt should be specifically designed to use capillary forces and syphonic action to drain water from saturated soils. 21mm wide slit to be made to perforated pipe to connect the drain belt to carrier pipe. The carrier pipe is uPVC Single wall corrugated perforated pipe designed for use in under-drainage of surface and sub-surface land/farms, canal, highways, roads, sports fields, building foundation, construction sites, terceptor drainage, in fields/farms, intercepting canal seepage and under-drainage offline canals etc conforming to IS 9271 having moulded as well as fabricated fittings such as coupler, Tee, Cross, Single Y, double Y & Bend. This pipe shall be wrapped with geotextile fabric and braiding shall be octagonal peripheral symmetric rangements and supplied in 100meter roll. The cost of the belt, pipes and end cap to be quoted separately. The belt and pipe to be quoted in Rmt and end caps in no of units. including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge for Drainage System at Wipro Circle For Man Mohan singh Memorial PVC Poweredrain Couplers for 80mm pipe FOR SUBSOIL DRAINAGE SYSTEM

Manufacture, Supply and Delivery of 600 MM internal dia R.C.C. NP 3 Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes with M35 grade concrete conforming to B.I.S. 458/2003 at exfactory (rate per meter of effective length) in standard lengths using Sulphate Resistant Cement confirming to IS 12330/1998 including laying and jointing, lowering in the readymade trenches,cost of rubber rings, conveyance to site inclding cost of all materials unloading, hoisting, laying true to aligmnet and gradient by using cranes jointing with rubber rings all other incidental and operational charges and testing,contractor's profit and overhead charges but excluding Seignorage Chrages etc., complete for finished item of work and as directed by the Engineer-in-charge for Drainage System at Wipro Circle For Man Mohan singh Memorial

Earthwork excavation for road way in soil by mechanical means including cutting and pushing the earth to side of embankment upto a lead of 100 metres including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete for finished item of work for trench cutting as per MOR&H specification No.301 and as directed by the Engineer-in-Charge FOR Road widening & Junction Improvement at Wipro Circle.

Excavation in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH , by Machanical means for Sumps, Thrust Blocks and Man Holes etc,. including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Forming embankment with borrowed useful earth from outside road boundary by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and excluding seigniorage charges, as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000ms , including Contarctor's profit and overhead charges, complete for finished item of work and as directed by the Engineer-in-charge Morth -305

Construction of granular sub-base by providing well graded / Close Graded material Grading I with minimum CBR of 20, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site upto lead of 1000 m spreading in uniform layers with motor grader on prepared surface and compacting with vIBRATORY wheel roller 80-100 kN to achieve the desired density, complete as per Technical Specification Clause 401 (MORTH 4.1),including Contarctor's profit and overhead charges but excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting withVibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.13 and Technical Specification Clause 406 MORD / MORTH. including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge

Providing and applying prime coat with Bitumen emulsion (SS-1) (Slow Setting) using emulsion pressure distributor at the rate of 0.60 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom including conveyance of bitumen emulsion round the trip as per Technical Specification Clause 502 MORD, including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge

Providing and applying tack coat with Bitumen emulsion (RS-1) (Rapid Setting) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom including conveyance of bitumen emulsion round the trip as per Technical Specification Clause 503 MORD, including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge

Providing and laying of Dense Graded Bituminous Macadam with 100 - 120 TPH batch type hot mix plant producing an average output of 75 tones per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 507 (5th revision) premixed with bituminous binder of VG-30 grade @ 4.5% of weight of total mixture and , transporting to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction including hire and operational charges all T&P and all other contingent charges necessary including cost of (excluding seigniorage) charges of all materials etc.including contractors profit and overheads complete for finished item of work and as directed by engineer in charge

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading II (13 mm nominal size), premixed with bituminous binder VG 30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic big paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects with all leads (MORTH 5.8)including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per Specification 803 MORTH, including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually,using concrete batching and mixing plant including contractors profit and overhead charges but excluding seinorage charges all complete as per clause 408 MORTH, complete for finished item of work and as directed by the Engineer-in-charge

Supply, laying and fixing of 60 mm thick precast concrete blocks for paving (pavers of Super Decorative/Aditya designer/maha bhima or Tricon tiles or any ISO 90001:2000 of M - 35 for Light traffic areas conforming to IS 15658 2006 in all shapes and designs as per the manufactures specification above including labour charges, loading and unloading, laying to desired lines and levels, complete for the finished item of work as directed by the Engineer in charge

Plain Cement Concrete (1:4:8) proportion by machine mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Granite macine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as machine mixing, laying and ramming concrete in 150mm layers , finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

R.C.C. grade M 30 Design Mix, using 20 mm Graded Metal (MORTH Specification) in Batching plant. Providing concrete for reinforced concrete for all types of works using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 &1203 MORH and 1500, 1700 & 2100 MORTH. including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge For Footings

R.C.C. grade M 30 Design Mix, using 20 mm Graded Metal (MORTH Specification) in Batching plant. Providing concrete for reinforced concrete for all types of works using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 &1203 MORH and 1500, 1700 & 2100 MORTH. including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge For Walls

R.C.C. grade M 30 Design Mix, using 20 mm Graded Metal (MORTH Specification) in Batching plant. Providing concrete for reinforced concrete for all types of works using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 &1203 MORH and 1500, 1700 & 2100 MORTH. including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge For Slabs

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 MORD / Sections 1600 & 2200 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supplying and fabricating, erecting and fixing of MS Angular Sections of approved design with structural steel.,complete as per the sketch enclosed including cost and conveyance of all materials, labour charges for erecting & fixing all structural steel works erecting in position and fixing complete in position, labour charges for fabrication, all incidental charges, overheads and contractor profit etc., complete for finished item of work as directed by the Engineer-in-Charge

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Cutting open C.C. road surface including stacking of excavated materials for pipe line trench work. as directed by the departmental officers.including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Carting of surplus excavated Earth within a lead of 5Km from the site including loading, unloading charges, cost & conveyance, dumping, labour charges, all leads & lifts and other incidental and operational charges etc., complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge.

Providing Textured paint finish of approved colour, in Asian paints/ equivalent make, including application of ACE outdoor emulsion of preferred colour of Asian paints/ Equivalent make.including cost and conveyance of all materials to work site and all operational, incidental,labour charges, excluding GST ect; complete for finished item of work.as directed by Engineer-in-chief FOR COMPOUND WALL Paint of Balance Civil Works

Supply &Fixing with 80mm thick Permiable Pavers(combination of 4 sizes in 80mm) for flooring, color and pattern asp selection projected out as coping and all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying graite to level, curing all taxes, Excluding GST; complete for finished item of work. FOR PALM GROOVES & PATHWAYS of Balance Civil Works

Provding and Laying of Hollow Grass Pavers, size 490mm x 245mm x 100mm, classic finish, soft gray shade, pattern as per selection, including subbase, bedding layer, laying void filling, compaction and filling including cost of conveyance, transportation charges, all operational and incidental charges, lift charges & labour charges for laying of pavers, levelling true to alignment, all taxes excluding GST and Seigniorage charges etc.., complete for finished item of work.FOR STATUE PLAZA of Balance Civil Works

Supply &Fixing with 18-25thick Yellow Stone as per selection as coping and cladding for Pedestal with edges flat nosed set over a base coat of CM (1:3) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm including cost and conveyance of all materials like cement, 50% River sand and 50% of Crushed stone sand/ Rock sand 4.75mm to 2.36 mm, water, tiles, coloured cement etc., to site, cost of base coat cement, all operational and incidental charges, labour and lift charges on all materials and all labour charges for mixing of cement mortar, laying graite to level, curing all taxes, Excluding GST; complete for finished item of work.

OPTION-1 OUTDOOR SPIKE UPLIGHT, 3W, 40°, 3000K, IP66, NON DIM, WITH ANTI GLARE VISOR GEL CONNECTOR complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

OPTION-1 OUTDOOR SPIKE UPLIGHT, 6W, 25°, 3000K, IP66, NON DIM, WITH GEL CONNECTOR, ANTI GALRE VISOR complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

INGORUND UPLIGHT ADJUSTABLE , 9W, 14°, 3000K, IP67, NON DIM WITH GEL CONNECTOR, HONEYCOMB complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

INGROUND UPLIGHT, 8W, 30°, 3000K, NON DIM, IP66, WITH OUTER CASING, GEL CONNECTOR complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

OUTDOOR PATHWAY ONE WAY LIGHT, 4.5W, 180°, 3000K, IP67, WITH GEL CONNECTOR complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

OUTDOOR STIX BOLLARD SPIKE MOUNTED, 3W, SYMMETRICAL, 3000K, NON DIM, IP65 Length: 1100mm-1300mm-1500mm complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

LED NEON FLEX, 14W/M , 3000K, IP68, WITH PROFILE AND IP 68 CONNECTOR KIT complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

POWER SUPPLY, 200W, 24V, NON DIM, IP67 complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

OUTDOOR WALL RECESSED LIGHT, 12W, 3000K, NON DIM, IP65 complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

OUTDOOR POLE MOUNTED LIGHT, 3X50W, 3000K, IP65, WITH FOUNDATION BOLTS , NON DIM complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

LED FLEXIBLE WALL WASHER,18W/M, /25*45, 3000K, IP68, NON DIM, WITH MOUNTING BENDABLE PROFILE complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

POWER SUPPLY, 150W, 24V, NON DIM, IP67 complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

LED NEON FLEX, 14W/M , 3000K, IP68, WITH PROFILE AND IP 68 CONNECTOR KIT complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

POWER SUPPLY, 150W, 24V, NON DIM, IP67 complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

LED NEON FLEX, 8.6W/M, 3000K, IP67, WITH CLIPS complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

POWER SUPPLY, 150W, 24V, NON DIM, IP67 complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

OUTDOOR FLOOD PROJECTOR , 44W, 17°, 3000K, NON DIM, IP66, WITH CUSTOM TEXT LENS complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

POLE HEIGHT 5000mm, WITH FOUR MOUNT BRACKETS, FOUNDATION BOLTS complete including Contarctor's profit and overhead charges excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Earth work excavation of Trench in hard ground soil up to 0.9 mtr depth, laying of U.G cables upto 50Sq.mm and back filling of Trench including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers,bends, end caps, Ts etc., including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge.

Supply and Transportation of Outer dia Outer dia 120mm and Inner dia 103.50mm walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers,bends, end caps, Ts etc., including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply and transportation and laying of 3.5core X 95 Sqmm XLPE insulated 1100V grade armored aluminium cable including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply and transportation and laying of 3.5core X 25 Sqmm XLPE insulated 1100V grade armored aluminium cable including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply of 3 Core x 2.5 sq.mm PVC / XLPE nsulated Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / ortune Arrt / Avocab / Nakoda / HPL / Sudhakar / Bonton / Rajnigandha / Pawancab / South King including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply of 3 Core x 4 sq.mm PVC / XLPE Insulated Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster/ V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Nakoda / HPL / Sudhakar / Bonton / Rajnigandha / Pawancab / South King including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply and transportation and laying of 4Core X 16 Sqmm XLPE insulated 1100V grade armored aluminium cable including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply of 4 Core x 4 sq.mm PVC / XLPE Insulated Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Nakoda / HPL / Sudhakar / Bonton / Rajnigandha / Pawancab / South King including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply of 3 Core x 6 sq.mm PVC / XLPE Insulated Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Nakoda / HPL / Sudhakar / Bonton / Rajnigandha / Pawancab / South King including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply, transportation and erection of suitable out door 63A, 4 Pole MCB as incomer, 6-32A SP MCBs 9 Nos as out going feeder pillar box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make as out goings, indication lamps, din channel, 6Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings,gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision etc., including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply and fixing of Automatic Street Light Control System based on daywise users settable mode of astronomical timer or digital timer with Optical Micro Sensor, Low voltage /High voltage trip and reset, operating voltage 380 480V AC, 50 HZ and shall withstand surge level of 8 KW. The electronic controller with IP 65 protection and suitable SMC / PC enclousure with IP 54 protection, MCBs of Legrand / Schneider / LK / Siemens / BCH of 10kA C curve and Contactor suitable to control the load 8 KW Three phase load with necessary hardware, Allen key set and clamping arrangements. Makes : Nature switch / Light Mate / Havells including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

3Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification732/1982 (Part II). including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply and laying of 50x6mm GI Strip including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply and laying Copper Plate / Strip / SWG wire No.8 /10 / 14 including labour and transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes .MCCB MAKE: L&T ( DSINE), ABB(TMAX) Incomer: a) 100A,25KA,4P MCCB-1 No,b) RYB indication lamps,c) 63A 4P MCB & 63A Contactro with Suitable Timers, d)Dual source KWH energy meter with 3Nos.CT 100 /5A and selector switch,3 nos. phase indicating lamps each backed up with MCB and switch shall be provided for incomer. Busbar:- 100A, TPN Aluminium busbar. Out goings: a) 63A 10KA,'C' curve 4P MCB -04 Nos, b) 40A 10KA,'C' curve 4P MCB - 12 Nos, c) 16A 10KA,'C' curve DP MCB - 20 Nos e) 10A 10KA,'C' curve DP MCB - 60 Nos etc,.with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge FOR OUTDOOR FEEDER PANEL

Providing Foundation for Lighting Outdoor panel etc,.Complete for finished item of work and as directed by Engineer In Charge.