REPAIRS TO BPS BASE DISPERSAL, HQ DISPERSAL AND OTHER CONNECTED WORKS IN AIRFIELD AT 8 FBSU AT AF STN AWANTIPUR

Amount

Repair to existing joint in PQC/PCC rigid pavement of size 20 to 40 mm wide and 40 mm depth (average) consisting of the following activities, complete all as specified and directed. Racking out old decayed/damaged existing sealing compound and cleaning the joints thoroughly by removing dust, dirt, foreign material by appropriate hand tools such as chisel, Hammer or L hooks.

NOTE:- (a) After cleaning the joints thoroughly, it shall got approved from GE before progressing further. (b) Removing the existing sealing coumpound from the edges, bottom and sides of the joints by cutting edges, bottom and sides of the joints 1mm of the existing construction joints (upto the full depth of 40mm (average) by mechanical tool (diamond cutter) to make the cross section of joint truly rectangular. NOTE:- Cutting the edges/sides/bottom of joints by using diamond cutter only and clean surfaces shall got approved by GE, after cleaning process, primer and joint filling shall be done in presence of Engineer -in- Charge. (c) Once again cleaning the joints with compressed air and applying two priming coats upto the full depth and width of the existing joints after an interval of 30 minutes to complete prepared surfaces of the joints. (d) Filling the closed polyethylene back up road 20 to 40 mm dia (as aplicable to joints) of make ELECON or M/s Supreme Industries Ltd and applying bond breaker tape on top of backup rod for complete width of joint and filled with polysulphide or polyurethane based sealant (minimum depth of sealant above backup rod shall be 15 mm) all as per manufacturer"s instruction including applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces and removing the tape after sealant is applied, complete all as specified and as directed. NOTE:-- (i) Masking tape shall invariably be used on both sides of the joints and before further progressing of joint shall be got approved by Engineer-in-charge.a panal recovery of Rs. 20.00 /RM shall be effected for both sides if masking tape not found used for joint filling (ii) Material shall confirm to BS (Make FOSROC (COLPOR -200 gray) or Chemtallraj India Pvt Ltd. (RALLITHANE ) OR STP Ltd (Shalifex PU) OR CICO OR Cippy poly Seal OR CHOKSEY. (e) Electric supply shall be arranged by the contractor at his own arrangements and rate quoted for the item deemed include the same.

M&L for cutting the edges of the cracks into V shape upto 15mm to 20mm wide and 25mm to 30mm deep and removing the old/ all loose material to a distance n. exc 100 mtrs including cleaning the cracks throughly with help of blower and filling the cracks with rubberized cut back bitumen complete all as specified and directed by Engineer-In-Charge (Crack should be Refilled upto top if settlement occurred in crack with in 24 hrs after first time filling).

M&L for repair to broken edges/ corner/ cracks of any width in concrete/ Rigid pavement by cutting grooves in rectangular/ square form with hand tools/ diamond cutter upto a depth of 25mm including removal of all loose and foreign materials to a distance exceeding 50m and not exceeding 250 m and cleaning of grooves by means of compressed air, complete all as specified and directed so as to remove all dust, dirt, sand and foriegn material with applying primer coat and filling with component system mixture/ chemical as per manufacturers instructions, complete all as specified and directed.

M&L for preparation of black top surface by wire brushes for removing caked mud etc sweeping with brooms and finally fanning cleaned surface to remove all loose dust etc. and wetting the surface with water as directed by Engineer-in-charge, applying polymer modified emulsion with mechanical sprayer @ 0.3 Kg (0.15 Kg Solution + 0.15 Kg water)/ Sqm mix with water 1:1, complete all as specified and directed.

Preparing of old concrete surfaces and painting lines, dashes, arrows and letters etc exceeding 10cm width road marking paint white or golden yellow by using water based paint, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints, hacking for key scrubbing down with water etc., complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L preparation of new or previously untreated surface & applying two coat distemper oil emulsion over a coat of Chalk whitening on plastered surfaces preparatory to distempering, complete all as specified and directed.

MS Ghulam Hassan and Sons (BID ID -3098669)

M/s Gh Qadir and Sons (BID ID -3111894)