C/O CSWN AT MIDDLE SCHOOL DREINEN BLOCK QAZIGUND

Earthwork in excavation by mechenical means in trenches for foundation (Not exceeding 1.5m in width), depth upto 1.5m incl. disposal of excavated earth upto 1m from cutting edge. (All Kinds of Soil)

Providing & laying of dry soling hand packed, in foundation & Trecnhes incl all carraiges complete job.

P/L in position cement conc. of grade 1:4:8 (1 cement : 4 fine sand : 8 Nallah graded stone agg 40 mm N/s) excl. cost of centering & shuttering in all work upto plinth level

P/L in position cement conc. of grade 1:3:6 (1 cement : 3 fine sand : 6 stone agg 20 mm N/s) excl. cost of centering & shuttering in all work upto plinth level.

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 Cement : 6 coarse sand)

Extra for B/W above Plinth Level upto Floor V Level

Centering and Shuttering I/c Strutting, Propping etc & removal of formwork for roof.

Plinth , steps and sides

Edges of slabs and breaks in floors and walls under 20 cm wide

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcment for R.C.C. work incl. straightening, cutting, bending, placing in position & binding all complete.

P/F of structural steel door/window frames and shutters complete job i/c priming and painting complete job i/c tower bolts/Aldrops/handle complete job.

12 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 mix

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

P/L 40mm thick flooring with 20 mm nominal size stone aggregate.

P/Fixing of Tiles of standard quality

a) Sand for an avg. lead of 25 Kms by MT

b) Bajri for an avg. lead of 25 Kms by MT and

e) Bricks for an avg. lead of 30 Kms by MT

P & fixing W C Squatting Pan ( indian type) W c Pan with 100 mm dia PVC " P" trap +10 litre low level PVC flushing cistern including flush pipe, manully controlled device with all fittings & fixture Complete Long pattern W.C Pan of size 580x440 mm

Providing and fixing high density polyethylene water storage loft tank with cover, con colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings (Water storage tank)

ii)PN-16 pipe , 20mm OD(SDR-7.4)

P/F Door Tee 100mm dia pvc of approved make type B

P/F soil waste and vent pipes IS 13592& fittings (IS14735) suitable to rubber ring joints which includes bends, rubber rings,jointing, junctions, etc all fittings complete job 11 0mm dia PVC SWR pipes complete job (Type B)

P/F soil waste and vent pipes IS 13592& fittings (IS14735) suitable to rubber ring joints which includes bends, rubber rings,jointing, junctions, etc all fittings complete job 75 mm dia PVC SWR pipes complete job (Type B)

P/F PVC cowel over vent pipe of approved quality type B

P/F 100x75 mm reducer PVC of approved quality

P/F of floor traps 110 mm with double chrome plated cover one grated and one closed and all other fittings required of standard quality, complete job.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, incl pvc connection & 50 mm waste pipe incl cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.

P/F brass bib cock of approved quality 15 mm dia of standard brand

P/F brass angle value of approved quality

P/F gun metal ball valve of approved quality 20mm nominal board

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms

Constructing brick masonry chamber/manhole with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame & hinges (light duty) 455x610 mm internal dimensions i/c padlock arrangement with lock, fixed in 1:1.5:3 mix,, inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :

Providing and fixing SS hand rail of approved size by welding etc

Add provision for Signboard/Photograph/unforeseen item (STA)