Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹18.9 L |
Tender Value
₹30.9 L
EMD Value
₹62,000
Closing Date
17 Mar 2026, 3:00 pmClosed
Executive Engineer, BUILDING DIVISION Ara
EE
EE, Ara Division , BUILDING CONSTRUCTION DEPARTMENT, Ara, Bihar
Superintending Engineer, Ara Circle
SE
Renovation Work of Jannayak Karpuri Thakur Hostel Building Dhanupara Ara for the year 2025-26
125739
NIT 1/BCD/ARA/2025-26
Open Tender
CIVIL
Bihar
• as per nit
CIVIL
PERCENTAGE
L1
1
6 documents required · 6 mandatory
₹5,000
Processing Fee: 590
₹62,000
13 May 2026
20 Feb 2026
18 Mar 2026
20 Feb 2026
17 Mar 2026
20 Feb 2026
BOQ for Renovation Work of Jannayak Karpuri Thakur Hostel Building Dhanupara Ara for the year 2025-26 29733.58
Sl No SOR Item of Work Quantity Rate (in Rs.) Unit Amount (in Rs.)
1 14.1. Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
14.1.1 With cement mortar 1:4 (1 cement :4 fine Sand) 793.00 m2 237.20 per m² ,18,81,00.00
2 13.80. Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. All Complete 4885.67 Nos 9.70 each , 4,73,91.00
3 13.80A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2020.156 m2 81.10 per m² ,16,38,35.00
4 13.77.3 + 13.78.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .Old work (one or more coats)/Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 5675.22 m2 71.90 per m2 ,40,80,48.00
5 13.48. Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.
13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. 2584.68 m2 117.30 per m² ,30,31,83.00
6 9.20. Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)Non decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
9.21.2 30 mm thick including stainless steel butt hinges wirh necessary screws 38.11 m2 1641.50 per m² , 6,25,58.00
7 13.82.2 +13.81.1 New wood work (two or more coats): With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) 95.28 m2 123.20 per m² , 1,17,38.00
8 13.82. Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:
13.82.4 Old wood work (one more coats) 405.48 m2 54.10 per m² , 2,19,36.00
9 10.12.1 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except: Doors 66.54 m2 3038.90 per m² ,20,22,08.00
10 10.38.1 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows all complete with. 4.0 mm thick glass panes. 123.59 m2 876.00 per m² ,10,82,65.00
11 13.81.3 +13.82.1 Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works:/ Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 66.54 m2 118.10 per m² , ,78,58.00
12 13.82. Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:
13.82.3 Old steel work (one or more coats) 546.33 m2 54.10 per m² , 2,95,56.00
13 17.7. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 6.00 nos 2369.90 Each , 1,42,19.00
14 17.23. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 8.00 Nos 1024.90 Each , ,81,99.00
15 5.3 Reinforced cement conrete work in ams,suspended floors, roofs having slope upto 15, ndings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). 3.50 m3 5335.90 Per m3 , 1,86,76.00
16 13.11.4 Cement plaster in course sand. 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 32.81 m2 141.50 Per m2 , ,46,43.00
17 5.22. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
a 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 64.95 Kg 94.50 Per kg , ,61,38.00
b 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 151.53 Kg 92.60 Per kg , 1,40,32.00
18 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2000.00 Ltr 9.70 Per Ltr , 1,94,00.00
19 5.9. Centring and shuttering including strutting,propping etc. and removal of form for.
5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 18.15 m2 404.70 Per m2 , ,73,45.00
20 12.78. Providing and fixing on wall face unplastidsed-PVC (working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.:
21 12.79. Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.:
22 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 25.67 m 1087.90 Per m , 2,79,26.00
23 17.19.1 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 8.00 Nos 1460.60 Each , 1,16,85.00
24 17.22. Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 12.00 Nos 131.60 Each , ,15,79.00
25 18.8. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc
a 18.8.1 15 mm nominal outer dia Pipes 126.00 m 278.20 Per m , 3,50,53.00
b 18.8.2 20 mm nominal outer dia Pipes 87.00 m 350.80 Per m , 3,05,20.00
26 18.49. Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 30.00 Nos 434.20 Each , 1,30,26.00
27 18.50. Providing and fixing C.P. brass long nose bib cock of approved quality,conforming to IS standards and weighing not less than 810 gms. 25.00 Nos 715.10 Each , 1,78,78.00
28 18.64. Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms weighing not less than 40 gms 16.00 Nos 106.10 Each , ,16,98.00
29 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 5.00 Nos 4470.90 Each , 2,23,55.00
30 17.25. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
17.25.1 Flat back wash basin of size 630x450 mm 12.00 Nos 1149.60 Each , 1,37,95.00
31 10.5.2 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer. Using flats 30x6 mm for diagonal braces and central cross piece 10.14 m2 3467.90 Per m2 , 3,51,65.00
32 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1.00 Nos 33603.00 Each , 3,36,03.00
33 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and huttering-all work upto plinth level.
4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 55.59 m3 4420.80 Per m3 ,24,57,52.00
34 13.13.2 +13.26 20 mm cement plaster of mix ; 1:4 (1 cement: 4 coarse sand)/ Neat cement punning 859.48 m2 250.40 Per m2 ,21,52,14.00
35 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 68.56 m2 1638.80 Per m2 ,11,23,56.00
36 11.37. Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 45.67 m2 686.80 Per m2 , 3,13,66.00
37 11.36. Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete 27.27 m2 795.00 Per m2 , 2,16,80.00
38 10.3. Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 9.87 m2 6303.40 Per m2 , 6,22,15.00
39 S-0L01 Labour for installation of uPVC extruded casement/sliding windows and doors including scaffolding. Un Skilled labour 25.00 Nos 409.40 each , 1,02,35.00
40 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 23.19 m2 83.50 Per m2 , ,19,36.00
41 Carriage of Materials
a Coarse Sand 82.72 m3 584.13 per m3 , 4,83,19.00
b Stone Chips 52.25 m3 4729.57 per m3 ,24,71,20.00
d Local Sand 0.31 m3 310.47 per m3 , , ,96.00
42 Extra Cost of Materials
a Cement 1089.00 Bags 13.14 per bag , 1,43,09.00
Grand Total 3,09,28,00.00
Executive Engineer
Building Division, ARA
aoc.json
Purchase Order
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT 01.pdf
NIT • 2.17 MB
1. BOQ of Jannayak Karpuri Thakur.xlsx
NIT • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .