SPECIAL REPAIR TO BLDG NO-05 STORE OF AGE E/M SUB DIVISION UNDED GE KAMPTEE.

Amount

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

All as per item above but exc 1.5 Sqm and n.exc 4.0 Sqm each. complete all as specified and directed.

Taking down of shutters of any description n.exc 1.0 Sqm each leaf and removing from site complete all as specified.

All as per Sl item above but exc 1.0 Sqm but n.exc 2.0 Sqm each leaf. complete all as specified and directed.

S&F, factory made kiln seasoned chemical treated 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges medium weight , welded to steel frame or fixed to chowkat complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F in repair 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F aluminium anodized handle casted type150mm long and fixed complete all as specified.

Supply and fix factory made pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc including one shop coat of priming complete all as specified and directed.

M&L for for cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in cills, copings, bed blocks, benching, kerbs, filling hollow of pressed steel frame and the like including necessary form work complete all as specified and directed.

M&L for preparation of wood surfaces or wood based materials of any description not otherwise described over 10cm width or girth apply one coat of synthetic enamel paint on old painted wooden surfaces. complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/blankets any thickness, including cover fillets/GI SNAP GRID/POP ceiling etc all as specified and as directed.

M & L For Providing and fixing ceiling at all heights with GRG (Glass fibre reinforced gypsum) false ceiling tiles of size 595x 595mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 995 NRCO.5 to .75 as per IS 8225: 1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised iron section of .33mm thick (galvanised @120 gms per sqm including both sides comprising of main T runner of size 15x 32 mm of length 3000mm cross T of size length 600 mm to form grid Gavanised @ 80 Gm per sqm I.e 50 mm long and 8mm outer diameter M-6 fasteners 6 mm dia fully galvanised hanger rod upto 1000mm long L shaped level adjuster of size 85x25x2 mm galvanised iron perimeter wall angle of size 24x24x.4 mm of length 3000 mm to be fixed on partition wall with the help of plastic rawl plugs at 450m m center to center 40 mm long dry wall wood screws carried out as per specifications and drawing all as directed by engr in charge with semi perforated12 mm thick micro triangular edge GRG false ceiling tiles complete all as specified and directed.

S&F steel ventilator factory made with top hung shutter including hinges steel peg stay with glazing bars , complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F rolled Mild steel work as in posts and struts or as in rafter/ Purlin including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

M&L two coat of synthetic enamel painting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed.

M & L For Steel rolling shutters,1.25 mm thick with out ball bearing, as specified including top cover, an-choring rod, hasp and staple and one shop coat of primer; erected in position as indi-cated, complete: but gear operated type with chain wheel and hand chain complete all as specified and directed.

M& L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old asbestos cement sheets as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws incl dismantling of old PGI sheets as specified

M & L for 75 mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and rough to receive tile etc incl demolition of cement conc 75 mm thick as in plinth complete all as specified and directed .

M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc, over and including 15mm thick screed bed of cement mortar 1:6 over and including 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor complete all as specified and directed

M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250 x7mm / 450 x 350x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed

M & L for 15 mm thick plaster in CM (1:4) on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster /Dado of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified.

M & L for 10 mm thick plaster in ceiling of CM (1:4) on brick walls finished even and smooth without using extra cement incl taking down cement plaster from ceiling including scrubbing down with water etc complete all as specified.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over two coats of white putty even and smooth complete all as specified and directed.

Material & labour for applying two coat of 100% premium acrylic emulsion paint having VOC Less than50gm/ltr and UV resistance as per IS 15489:2004 alkali and fugal resistance dirt resistance exterior paint of required shade (company Depot tinted ) with silicon additives @1.43 ltr/sqm over and including priming coat of exterior primer applied @0,9 ltr/10 sqm over new surface and including preparationof surface complete all as specified and directed. Note:- Painting to be executed by mechanical means through authorised applicator of approved make

Demolition of cement concrete in ground floor & pavings n.exc 15cm thk (below or above ground level) complete all as specified and directed.

M&L for 18-25 mm thick kota stone (machine cut) slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing over and including screed bed 20mm thick in CM 1:3 complete all as specified and directed.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L 18-20mm thick granite work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F powder coated Anodised aluminium window shutters, side hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, roller, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S & F powder coated Anodised aluminium ventilator shutters, fixed type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S & F of 4 mm thick plain sheet glass, ordinary quality and glazing or fixed with aluminium windows complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F mild steel work as in bands, straps, hold fasts, clamps and similar small articles conforming to Fe-290 grade -E-165 complete all as specified.

S&F 5mm thick Soild colour/printed designer PVC wall/ceiling sheet instips and channel feathered at the edges for fixing on solid PVC wall/ceiling lining insulated PVC wall/ceiling lining and solid PVC partition inclusive of solvent cement and fixing arrangements (suitable fillet, H-joint, U-end, J-edge, External corner and internal corner, horizontally, vertically or at any height and angle) at site, complete all as specified and directed. Note:- PVC wall/ceiling lining should be reversible, waterproof, washable, rib-reinforced, rigid, standard metal.

M&L post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors. complete all as specified and directed.

M&L post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles of size 30cm X 30cm X 20mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over 75mm thick PCC 1:4:8 type D2 incl demolition of 100mm thick PCC complete all as specified and directed

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed.

Excavation in trenches n exc 1.5m in depth and n exc 1.5m in width for fundation etc or for shafts, wells, cesspits,manholes,pier holes etc. nexc and getting out in sqm on plan & getting out in soft/loose soil. complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed.

M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for providing Reinforced cement concrete M-25 (design mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L Form work to side of columns and simillar work for fair finished complete all as specified and directed.

M&L for providing Reinforced cement concrete M-25 (design mix) as in columns and pillars etc complete all as specified and directed.

M&L Form work to side of sides and soffits of floor ,lintel or roof beams including supports, overhangs etc also splays between floor and beam etc complete for fair finished all as specified and directed.

M&L for providing Reinforced cement concrete M-25 (design mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L Form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specified and directed.

M&L for providing Reinforced cement concrete M-25 (design mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M&L Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide for fair finish complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for providingReinforced cement concrete M-25 (design mix) (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F milt steel TMT bars 6 to 8 mm dia cut to length, bent to shape requred, including crancing bending and binding spirally for hooping for columns, hooking ends & binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 64 here-in-above but half brick wall in CM 1:4 complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished fair and even with out using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specifed and directed. (Note : WPC will be measured & paid separately).

M&L Rendering 5 mm thick in CM 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over 1 mm putty layer complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

All as per item No 70 here-in-above but in ceiling complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed.

M&L for rendering 10 mm thick in cm 1:4 on brick or concrete surfaces using water proofing liquid compound and finishing surfaces even & fair without using extra cement. complete all as specified and directed. Note: water proofing liquid will be measured and paid separately.

Material & labour for provision of water proofing treatment by using APP torch on mineral/slate finished membrane over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sq m on clean and dry surface and then providing APP membrane having non woven. polyester film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sq m and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps respectably complete all as per manufacturers compound complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size including dummy switches wherever required complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item Sl No 78 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

All as per item Sl No 78 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

All as per item Sl No 78 above but One 3 pin 5 amps socket out let point on independent board, complete all as specified and directed.

All as per item Sl No 78 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.

All as per item Sl No 78 above but wiring with 4.00 sqmm multi stranded cable and earth wire with copper conductor of size 4.00 sqmm for 15 amps power point, complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed. PVC Conduit Make : Polycab,Modiplastr, Finolex. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make.

As per item No 84 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm.

As per item No 84 above but 4 x 10.0 Sqmm with earth wire of 2x 10.0 Sqmm.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

S & F sheet metal enclosure with socket plug top and MCBs(16 to 25 A) a two pin and earth plug and socket complete with one single pole MCB

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed.

Supplying and fixing 20-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make : Philips/Havells/Jaquar/Shakti

Removing of existing light fitting any type including disconnecting of supply anf refixing the same to other location where directed

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completE all as specified and directed. Make : Philips/Havells/Jaquar/Shakti

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door including taking down old unsv DB. Make-Legrand/ L&T/ Havells.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door including taking down old unsv DB, complete all as specified and directed. Make:-Legrand, L&T, Havells..

Supply and fix MCB Triple pole & neutral 240 volt 40 to 63 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Havells

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Havells.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Havells

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 1,26,078.92]

SHIV SHANKAR MISHRA (BID ID -3289102)

M/s Rahul Traders (BID ID -3294462)

M/s Rana Construction (BID ID -3288699)

chronicle enterprises (BID ID -3294478)