C/O OF ROOF OVER ALREADY CONSTRUCTED BUILDING AT HIGH SCHOOL (WAGHAMA) BLOCK BIJBEHARA

Providing and laying in position specified Grade of Reinforced cement concrete excluding the cost of centring, shutering and finishing of all work.1:1.5:3(1 Cement : 1.5 Coarse sand : 3 Graded stone aggregates 20 mm nominal size) incl carriage by mt 15kms

Centering and shuttering including strutting propping etc. and removal of form work

cement concrete flooring 1:2:4 mix concrete ,40 mm thick using 12.50mm nominal size crushed stone aggregate

Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand)

extra for brickwork upto floor v level

Providing wood work in frames of Doors,windows, clerestory window and other frames,wrought frames and fixed in position.importedwood(KD)

Providing and fixing 30 mm thick glazed shutter for windows and clearstory windows using 10kg/sqm (4mm thick)glass panes including black enamelled ISI marked M.S hinges with necessary screws. Imported wood (KD)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood(KD) and well matched teak face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick

Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge, imported (KD) wood

150 mm tower Bolts (D)

100mm tower Bolt(W/V)

125 mm Handle

100mm Handle

Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. TMT bars

12 mm thick plaster in Cement Mortar 1:6 mix.

Structural steel work welded in built up sections, trusses and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / tubes / channels etc.

Providing C.G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (0.50 mm thick)

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Carriage of bricks by mt 15kms

Add provision for wall putty to walls,painting for door/window and ceiling

Add provision for carriage of cement /steel/signboard/photograph