REPAIRS TO PENT ROOFING (SHEETING), PLASTERING AND FALSE CEILING WORK TO CERTAIN BUILDING AND FLOORING, JOINERY AND PLUMBING WORK FOR ZONE II AREA UNDER AGE BR-I OF GE NAGROTA

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering, complete all as specified and directed

S & F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

M&L for 6mm asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts complete all as specified and directed.

M&L for 6mm asbestos cement two piece adjustable plain wing ridge fixed with L type or J type or cranked hook bolts complete all as specified and directed.

Dismantling wrought iron or mild steel work in any description, complete all as specified and directed.

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

S&F wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire , etc., including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe-290 Gde E-165 complete, all as specified .

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.

Preparation of new steel and iron surfaces not exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

M&L for preparation of old steel and iron surfaces of any description, exceeding 10 cms in width or girth and applying two coat of synthetic enamel paint complete all as specified.

S&F aluminium anodised snap grid (powder coated) frame work of grid size 605 x 605 mm including hangers 6 mm dia GI (upto 1200 mm long) for false ceiling including notching and preparing holes, includiing aluminium cleat/corner pieces and GI 4 mm dia suspenders with butterfly clips, wall angle of size 24 x 24 mm, main runner (tee) of size 24 x 38 mm , cross tee of size 24 x 28 mm, ( No. of suspender shall be decided by the GE as per actual size requirement) including 4 mm thick non asbestos fibre cement plain building boards fixed to aluminium snap grid and providing two coats of white wash including preparation of surfaces including dismantling wall and ceiling board, any thickness including cover fillets if any complete all as specified and directed

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified .

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water complete all as specified.

Rendering 10 mm thick cement plaster in cement mortor 1:6 on fair faces of brick work even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortor 1:4 on fair faces of brick work even and smooth without using extra cement complete all as specified and directed.

Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified

Preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty over a coat of primer on wall etc. complete all as specified.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces (internal) in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of old plastered wall surface and applying two coat of cement base paint all as specified and directed.

M&L preparing old plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed.

M & L for 10 mm thick Vitrified Ceramic tiles, Light shade, (square/rectangle) Polished area of each tile exceeding 0.36 sqm but n exc 0.42 sqm, in floor in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick bedding layer of cement mortar for laying floor finishes in CM 1:6 , complete all as specified and directed.

Demolition of concrete (unreinforced) of any description and in any position not otherewise specifically provided for, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as a sub base finished even and smooth, complete all as specifed and directed

Taking down chowkat with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4 Sqm each complete all as specified and as directed at site.

Taking down chowkat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm each (wood or steel), complete all as specified and as directed at site.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 Sqm each complete all as specified and as directed at site.

All as per item No. 29 here-in-before but n.exc. 1.00 sqm.

Pressed steel door frame of size 125 mm x 60 mm with one or more rebates using 1.25 mm thick PBI sheet including necessary fixing lugs, lock strike plate including one shop coat of zinc chromate primer, complete all as specified and directed.

All as per item No. 31 here-in-before but 105x60 mm.

S & F 35 mm thick second class hard wood, factory made, plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 35 mm thick second class hard wood, factory made, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

M & L for Prepration of new wooden surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Box type steel window side hung double shutters with provision for desert coller/AC (Inside for wire mesh & outside for glass), including guard bar hinges, steel handle, tower bolt and steel peg stay complete with glazaing bar dovetailed for welded and fixed steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 including taking down of existing steel windows, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separately.

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separteley.

S & F in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and directed.

S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S & F in repairs 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane including hacking out old glass panes, complete all as specified and directed.

M & L for 4 mm thick figured glass, pin head type and glazing with oil putty in square n.exc. 0.5 sqm each pane, complete all as specified and directed.

S & F anodized aluminium frame for doors, windows ventilators with one or more rebates including jointing cleat for fixing etc, complete all as specified and directed.

S&F anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

All as per ser item No. 44.00 here in above but powder coated

S & F in repairs aluminium anodised window and ventilator shutters side hung type without sash bar, aluminium sections weigthing 0.55 kg/m including necessary jointing cleats, glazing clips rubber packing, aluminium snap beading screwes anodized aluminium fittings such as peg stay 150 mm long(1 No) hinges type B-21 100 mm long 2 Nos suitbale handle 1 Nos, complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.

S & F 300 mm long aluminium sliding door bolts clamps type (ISI marked) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plates and two on staple plate, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F 75 mm long butt hinges, medium weight, cold rolled mild steel fixed with screws or welding complete all as specified and directed.

All as per item No. 51.00 here-in-before but 100 mm long.

S & F 150 mm Mild steel pressed handle oval type stove enameled black, complete all as specified and directed.

S & F mild steel 150 mm long helical door springs including roller and roller plate complete and necessary welding required, complete all as specified and directed.

18/19 mm thick prelaminated particle board interior grade as in cupboard shutters, partition wall and shelves fixed with frame, complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing, complete all as specified and directed.

S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

M & L for Glazed ceramic coloured tiles (first quality) of size 300 mm x 600 mm x 7 mm as in vertical surface, dado/skirting, over and including 10 mm thick plaster in CM 1:4, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L of machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) (each stone not less than 55 cms x 55 cms) over 15 mm thick screed bed in CM (1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 kg/Sqm of surface including dismantling existing surface, complete all as specified and directed.

M & L 25 mm dia aluminium anodized deproy rod poweder coated teat wood textured finished and wall thickness 1 mm complete designed and appterned as approved by Engineer-in-Charge.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F for 15 mm GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor, complete all as specified and directed.

S&F for 20 mm GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor, complete all as specified and directed.

M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills chases for concealed water tubing exc. 10 cm but n.exc. 20 cm girth complete all as specified and directed.

S&F 15mm bore stop valves, chromium plated fancy type with long shank, screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and directed by Engr-in-Charge .

S & F in repair for 15 mm stop valve/angular stop cock fancy tpe chromium plated alloy, screwed down, high pressure, with crutch or bitterfly handle, screwed both ends for iron pipes or union, complete all as specified and directed.

S & F in repair for PVC connections pipe 15 mm size, with PTMT nuts of length 600 mm, complete all as specified and directed.

S & F in repairs for 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swevel joint any size including fixing to steel pipe or union complete all as specified and directed.

S&F waste PVC pipe for wash basin, complete all as specified and directed.

S & F in repair for 15 mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 71,680.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/S MANISHA BUILDERS

RAJINDRA ENGINEERS & CONTRACTORS

SUNIL AND CO

Mahajan Auto Traders

KAY KAY ENGINEERS & CONTRACTORS

Kalsi Engineers and contractors

GENESIS INDIA

M/S STAR CONSTRUCTIONS