Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 CrAccepted-AOC | ₹11.7 Cr Quoted ₹12.0 Cr | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹13.3 CrRejected-AOC | ₹13.3 Cr | L2 | Rejected-AOC Other than lowest bidder |
| 3 | L3₹15.5 CrRejected-AOC BANPUR BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | ₹15.5 Cr | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
₹6.8 Cr
EMD Value
₹6.6 L
Closing Date
22 Oct 2024, 6:00 pmClosed
CE 31 Srinagar Zone
HQ CE 31 Srinagar Zone Srinagar, 190004
COMPLETION OF INCOMPLETE AND BALANCE WORKS FOR PROVN OF SECURITY WALL, WATER AND ELECTRIC SUPPLY TO GUARD POSTS AT KHUNDRU
2023_MES_630016_3
800156/E8
Open Tender
Civil Works
450 days
Khundru
Please refer Tender documents.
10 documents required · 10 mandatory
₹3,000
GE 861 EWS
₹6.6 L
Yes
12 Nov 2024
20 Sept 2024
24 Oct 2024
20 Sept 2024
22 Oct 2024
4 Oct 2024
20 Sept 2024 - 30 Sept 2024
Amount
Sch 'A' Part-I (Building works) carried forward from pre-priced Schedule.
Sch 'A' Part-II (Internal Water Supply works) carried forward from pre-priced Schedule.
Sch 'A' Part-III (Sec-I) (Internal Electrification) carried forward from pre-priced Schedule.
Sch 'A' Part-III (Sec-II) (Internal Electrification) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Supply and fixing VELOCITY ceiling fan AC single phase 230V / 240V 50 Hz of size 1400mm sweep, 290 RPM and complete with connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts complete all as specified and directed. MAKE : HAVELLS MODEL: VELOCITY OR EQUIVALENT IN KHAITAN / CROMPTON GREAVES
Supply and fixing VENTILAIR DX PVC ventilation fan AC single phase 230V /240V 50 HZ of 200mm dia sweep, 1350 RMP with louvers, shutter and connecting up ceiling rose complete all as specified and directed. MAKE : HAVELLS MODEL: VENTILAIR DXOR EQUIVALENT IN KHAITAN / CROMPTON GREAVES
Supply and Fix lamp holder batten type with LED lamp 7W, PVC/Polycarbonate type with B-22 cap suitable for batten fitting, ccomplete all as specified and directed by Engr-in-Charge. MAKE : HAVELLS Cat Part No AHLHGMW000 EQUIVALENT IN Anchor/ Crabtree
Supply and Fix LED 18 W fitting (4 ft) surface and wall mounted LED batten with polycarbonate housing & intergrated electronic driver complete complete all as specified and directed by Engr-in-Charge. MARE : HEVELLS MODEL No LHEXBQP5INW018 or equivalent in BAJAJ/HAVELLS/PHILIPS
Supply and Fix 20W LED street light fitting for area illumination energy saving environmental friendly long life LED street light fitting made up of pressure die cast AI housing with high power LED as lighting source and lence embedded PC cover having top opening separate driver compartment with IP 65 protection and impact resisitance of IK07 complete alll as specified and tesing on completion and including GI wall mounting bracket 40 mm dia 1.2 Mtr long incl 30 degree bend with 02 No FI clamps 25 x 3mm size with necessary nut bolts etc. complete all as specified and directed by Engr-in-Charge. MAKE : HAVELLS Cat PART No LHETBXU7PA6S020 or Equivalent in PHILIPS/ CG
Supply and Fix LED mirror light 9 Watt 4000 K, polycarbonate body and ribbed opal diffuser fitting complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitalbe size of 230 volts, 50 Hz complete all as specfied complete all as specified and directed by Engr-in-Charge. MAKE : HAVELLS Cat PART No LHEXARP6PNIW009 or Equivalent in PHILIPS/ CG
Supply and Fix Sheet metal enclosure for DB's factory made,double door, 240 volts , 50Hz, with IP-42 protection, single pole and neutral 4 way with 100 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. (Make :Cat Part No DHDPSHODRW04 of Havells or equivalent of Schneider/ Legrand)
Supply and Fix Sheet metal enclosure for DB's factory made,double door, 240 volts , 50Hz, with IP-42 protection, single pole and neutral 8 way with 100 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. (Make :Cat Part No DHDPSHODRW08 of Havells or equivalent of Schneider/ Legrand)
Supply and Fix MCB SPN 240 V, 50 Hz, 10 KA, C Curve of rating 40 Amp complete all as specified and directed complete all as specified and directed by Engr-in-Charge. Make: Havells cat Part No.DHMGCSNF040 or equivalent in SCHEINDER/C&S.
Supply and Fix MCB SPN 240 V, 50 Hz, 10 KA, C Curve of rating 20 Amp complete all as specified and directed complete all as specified and directed by Engr-in-Charge. Make: Havells cat Part No.DHMGCSNF06-32 or equivalent in SCHEINDER/C&S.
Supply and Fix MCB SP 16 Amps 240 volt, 50Hz, 10KA, C curve made from moulded self extinguising thermostat plastic complete all as specified and directed by Engr-in-Charge. Make: Havells cat Part No.DHMGCSPF006-032 or equivalent in SCHEINDER/C&S.
Supply and Fix MCB SP 6 Amps 240 volt, 50Hz, 10KA, C curve made from moulded self extinguising thermostat plastic complete all as specified and as directed. Make: Havells cat Part No.DHMGCSPF006-032 or equivalent in SCHEINDER/C&S.
Sch 'A' Part-IV (Road/Path Works) carried forward from pre-priced Schedule
Sch 'A' Part-V (Area Drainage Works) carried forward from pre-priced Schedule.
Schedule 'A' Part-VI (Sec-I) (Compound Wall , Fencing & Gate ) carried forward from pre-priced Schedule.
Sch 'A' Part-VI (Sec-II) (Compound Wall , Fencing & Gate ) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Supply and Fix Punched Tape Concerrtina Coil (including spike and handle) with 56 loops and dia 600mm, Max covered length 8 RM, having a core wire of high carbon spring steel of high tensile strength. The punched tape and copre wire (2.5 + 0.35mm dia) shall be heavy galvanized (IS-1730) (Wire-275GSM & strip-200 GSM) to provided protection against out door exposure. The punched tape shall mechanically crimped over the core wire and tehn formed into a coil at various parts of the periphery of the coil. The width of strip as 19mm and spacing of blades 24.00 + 0.5 mm C/C. The weight of each coil shall be 8 + 5% Kgs without packing material and coil lenth 8 Mtr (maximum) when opened up each coil would with bituminzed hessian cloth for providing protective packing Ref specification No CQAE/5660/1620/a for raw material and drawings IMGA-0112/B (Sheet 1 of 2), IMPD-1821, IMPD-1822 complete all as specified & directed.
Schedule 'A' Part-VII (Protective Works ) carried forward from pre-priced Schedule.
Schedule 'A' Part-VIII (Sec- I) (External Water Supply Works) carried forward from pre-priced Schedule.
Schedule 'A' Part-VIII (Sec- II) (External Water Supply Works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Submersibe pump, electric driven 5 HP, 415 V TP suitable for 100 LPM for minimum 120 Mtr head, 2900 RPM, NRV size min 38mm. complete all as specified & directed. Make : Kirloskar/CRB/CG
Supply and fix DOL submersible pump controller (standard) 5 HP-3 Phase, 9.52 Amp complete all as specified & directed. Make: URJA, Cat Part No. IHSDOAK1LA OR equivalent in Havells/Kirloskar.
Supply and installation testing and commissioning of Servo stablizer automatic operation, three phase indoor type and designed for input variation between 250 V to 480 V with output voltage stablized at 415 V for a capacity of 7.5 kVA complete all as specified & directed. Make: Servostar/Vintec/ITL.
Valve pit of size 60 cm x 60 cm x 60 cm (internal dimensions) ,brick construction, including all necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to distance not exceeding 50 m and depositing where directed, PCC in foundation of the mix (1:4:8) type D-2, brick masonry in cement mortar (1:4) rendering 12 mm thick in cement mortar (1:4) internally and to exposed brick work/ concrete surfaces, finished even and fair. Mild steel angle iron 40 x 40 x 6mm frame MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed MS work with two coats of synthetic enamel paint as approved by the GE over a coat of red oxide primer and painting all the MS work embedded in PCC with two coats of black bituminous paint complete all as specified, shown on drawing and directed.
Schedule 'A' Part-IX (Sec- I) (External Electric Supply Works) carried forward from pre-priced Schedule.
Schedule 'A' Part-IX (Sec- II) (External Electric Supply Works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Supply and installation testing and commissioning of servo controlled for automatic operation,three phase naturally oil cooled indoor type & designed for input variation between 250 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 100 KVA complete all as directed.
Supply, installation, testing and commissioning of silent diesel engine driven generating set developing BHP air cooled of capacity 40 KVA (32 KW), 415 volts, 0.8 power factor, mounted on common base frame coupled, 1500 RPM alongwith sound proof enclosure (accoustic enclosure) design for reducing the sound level to 75 dBA IS 10001/1002 part 10 as per approved CPCB norms and as per GSR 371(E) dated 17.05.2002 with silencer pipe and silencer muffler covered with asbestos rope 25mm thick independently supported from engine to outside of pump house upto 1.00 mtr cold start kit, battery start with suitable size of standard cable for connection from DG set to panel board, DG Set shall be capable of operating in temperature range of (-) 20°C to (+) 35°C with and including the following :- (a) PRIME MOVER. Vertical diesel engine of suitable capacity having 40 BHP air cooled (Radiator mounted) closed circuit as per BS-5514 or ISO-3046 direct injection type with turbo charger. The diesel engine shall be capable of running 24 hrs continously with 10% over loading for one hour in every 12 hours. Engine shall be equipped with all standard fitting as per manufactures recommendations and mounted on common base plateform through flexible coupling with following accessories :- Contd......./-
(i) RPM cum hour meter. (ii) Battery charging ammeter. (iii) Ignition key and starting with push button switch. (iv) Lubrication oil pressure gauge. (v) Mechanical Governor controlling. (vi) Toggled switch for idle running. (vii) Oil temp gauge. (viii) Safety control (Trip) for the following :- (aa) Low lubricating oil pressure. (ab) Over speed. (ix) Lub oil coolant heater to avoid freezing. (x) 12/24 volts (as per manufactures recommendation/design) starting equipment compresing of all followings : (aa) Battery charging alternator with inbuilt regulator 12/24 Volts and of Ah as recommended by manufacturer of DG set, battery 180 Ah -01 Nos, (make: Exide/Amaron or as recommended by manufacturer) Batery shall be maintenance free type. (ab) Self starter motor assy of suitable capacity. (ac) Battery leads (copper stranded cable) of suitable size with brass thimbles and terminals. (xi) Cold starting kit. Make of Engine: Kirloskar/Cummins/Crompton Greaves Ltd/ Mahindra.
(B) ALTERNATOR : Alternator of capacity 40 KVA (32 KW), 415 volts, 50 C/S, 1500 RPM, 0.8 Power factor, self excited, self regulated, screen protected with slef excited field brush rotating fixed designed to be coupled with above engine through closed coupling. The Alternator shall be conform to IS 4700 of BS-5514, ISO-3046. Make: Kirloskar/Cummins/Crompton/Jyoti/NGEF/Stamford. (C) MANUAL CONTROL PANEL: The control panel will be fabricated out of 16 SWG MS sheet, panel, Detachable cable gland plates shall be provided. The panel shall be equipped as follows: - (i) Moulded case circuit breaker of suitable capacity - 01 No (ii) Aluminium busbars/copper cables of suitable capacity provided withterminals - 04 Nos (iii) Current Transformer of suitable ratios - 03 Nos (Set of three) (iv) Set of instrument MCBs -01 Set (v) Microprocessor based controller controlling various mechanical and electrical protection with display and indication of electrical and mechnaical parameters:- Contd......./-
(vi) Cold starting kit. (vii) Power factor meter-01 No (viii) MCCB 4 pole for suitalbe battery-01 No for incoming as recommended by manufacturer (ix) Battery 12 V 180 AH, Battery leads (x) First fill of lubricating oil (aa) Display Parameters (i) Electrical Parameters: Phase voltage, line current, frequency, average voltage, average current, KW, KWH, KVA, KVAR, Power factor. Contd......./-
(ii) Mechanical Protections: Lube oil pressure, coolant temperature (for liquid cooled engines), cylinder head temperature (for air cooled engines), Engine speed, fuel status, engine run hours, Battery voltage. (ab) Protection: - (i) Electrical Protections: Under/Over voltage , under/over frequency, phase failure or pahse erese, over current, over KW. (ii) Mechanical Protections: Under/Over speed, low lube oil pressure, high engine coolent temperature (for liquid cooled engines), Belt failure (for air cooled engines) low fuel level alarm. (D) OTHER FITTINGS: (i) Battery charger: - Battery charger having electric circuit consisting of rectifiers, capacitors and resistance etc. The battery charger should be able to charge the battery at all time wherever electric supply given to battery charger through control panel or electric power point. (ii) Inbuilt Fuel Tank: - Inbuilt fuel tank of suitable capacity for 12 hours running as per manufacturer recommendation fitted inside accoustic enclosure with all connecting pipes and fittings upto fuel pump and over flow pipe from engine to tank including level indicating gauge duly marked and drain valve and air vent plug etc.
Notes: - (a) DG set shall be supplied alongwith with original accoustic enclosure of the manufacturer's suitable for 30 KVA set as per CPCB Norms. (b) Pre commissioning test of DG set shall be carried out by the rep of Accepting Officer within overall cost quoted. (c) Foundation of DG set shall be as per design of manufacturer and cost thereof shall be included in overall cost quoted. (d) Complete Dg set shall be included in overall cost quoted. Note:- Rate for item No 13.02 to 13.07 shall be quoted at item No 13.02
Supply and fix thermoplastic cable junction box of size 260 x 210 x 117 mm, IP66/IP67 suitable to fix on LT eletric poles, alongwith nuts, bolts, clamps etc. The junction box shall be with alumminium bus bar fit to carry 63 amps alongwith single MCB SP 06 amps. The cable junction box shall be appropriate to carry -02 Nos LT UG cable 16/25 Sqmm 4 core. complete as as specified and directed. MAKE : Hanse/Legrand/Havells
Supply and laying PVC insulated sheathed FRLS with stranded copper conductor wire of size 1.5 sqmm, drawn internal through GI pipe including making suitable holes by drilling and connecting street light with bus bar chamber complete all as directed.
Supply, installation, commissioning and testing CPRI approved LT panel outdoor type of suitable size recommendied by manufacturer cubuical floor mounted type (IP-55, degree of protection) made out of 3.15 mm thick CRCA sheet duly powder coated, bus bar 300 amps rating made of aluminium strip duly drilled holes for connections and mounted on epoxy baed post insulators for 3 phase 4 wife 415 volts 50 HZ AC supply. Thimbling cable entry boxes, cable gland etc. panel board foundation is as per PS and IEC 61439-1, suitable for and including the following: -
(a) MCCB 200 Amps TPN 50 HZ 35 KA - 01 Nos (incoming) (b) MCCB 100 Amps TPN 50 HZ 25 KA - 01 Nos (out going) (c) MCCB 63 Amps TPN 50 HZ 25 KA - 04 Nos (Spare) (d) Amp Meter Digital type 0-200 alongwith CT's of suitable ratio 03 Nos (e) Volt meter digital type 0-500 votl 01 Nos with slector switch (f) Indicator lamp LED type in RYB colour Note:- Rate for item No 13.10 to 13.11 shall be quoted at item No 13.10
Supply, installation, commissioning and testing CPRI approved LT panel outdoor type of suitable size recommendied by manufacturer cubuical floor mounted type (IP-55, degree of protection) made out of 3.15 mm thick CRCA sheet duly powder coated, bus bar 150 amps rating made of aluminium strip duly drilled holes for connections and mounted on epoxy baed post insulators for 3 phase 4 wire 415 volts 50 HZ AC supply, hibling, cable entry boxes, cable gland etc. The panel board shall be grouted by using foundation 1:2:4 type C1 with 20 mm graded stone aggregates totally tested as per IEC 61439-1, suitable for and including the following: -
(a) MCCB 100 Amps TPN 50 HZ 35 KA - 01 Nos (incoming) (b) MCCB 63 Amps TPN 50 HZ 25 KA - 03 Nos (out going) (d) Amp Meter Digital type 0-200 alongwith CT's of suitable ratio 03 Nos (e) Volt meter digital type 0-500 votl 01 Nos with slector switch (f) Indicator lamp LED type in RYB colour Note:- Rate for item No 13.12 to 13.13 shall be quoted at item No 13.12
Supply and fixing along the poles galvanised pipe medium grade including fittings for passing PVC wire for connection to light fittings of dia 50mm including necessary nut, bolt and clamp etc to fix with steel tublar pole complete all as specified and directed
Supply and fixing street light panel board with digital timer and MCB rating 40 Amp TPN with Contractor rating 32 Apms TP complete all as specified and directed . Make-Havells Cat Part No IHXTSO3060 or equivalent in schinieder/ Indo Asian/legrand.
Supply and fixing LED streetlight 60 Watt made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, of size 5700K with IP66 protection and impact resistance of IK07 all as specified and directed . Make Havells Cat Part NoLHETBXU7PA6J060 or equivalent in Philips/Bajaj
Supply and fix galvanised iron pipe "light grade" brackts 1.20 mtr length, 40mm dia, bent to shape to obtained required shape including clamps, nuts/bolts/washers etc to fix the street light with steel tubular pole complete all as specified and directed.
Supply and fix cable route indicator made out of 50 x 50 x6mm angle iron, 60mm long embedded in PCC block of suitable size with moulded letter "HT cable or LT cable" suitable inscribed on cast iron circular plate 8mm thick 100mm dia complete including PCC 1:3:6 type C-2 (using 40mm graded aggregate) block of 150 x 150 x150 mm size, complete all as specified and directed.
Sch 'A' Part-X (Site Clearance and Earth work) for works covered under Sch 'A' Part-II to IX) carried forward from pre-priced Schedule.
Sch 'A' Part-XII (Sec-I) (Misc & Defective works) carried forward from pre-priced Schedule.
Sch 'A' Part-XII (Sec- II) (Misc & Defective works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
Fixing only in repairs chain link fencing of any size complete all as specified and directed.
Fixing only in repairs concertina coil complete all as specified and directed.
Laying only cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armounred, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 Sqm 3½ core LT complete all as specified and directed.
Laying only cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armounred, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 Core LT complete all as specified and directed.
Jk Engineering Construction Co. (BID ID -3141849)
M/S SUHEEL CONSTRUCTIONS (BID ID -3147163)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid