GE AF/AMB-32/2021-22 REPAIRS AND MAINTENANCE OF WOODEN FURNITURE AND SOFA SET INCLUDING POLISHING FOR SITE-II, III, IV AND 260SU PATIALA AND AF STATION AMBALA UNDER GE (AF) AMBALA

Amount

M&L for carrying out repair and replacement of the following under-mentioned parts of bed plywood top by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-246

S&F ply top made out of 12mm thick commercial plywood of size 1800x900mm BWR ISI marked IS-303 as approved

S&F long rail frame of size 35x90x1980mm long made out of 1st class hard wood (Teak)

S&F head board frame made out of 1st class hard wood (Teak) with 4mm thick OST plywood (Teak) as per existing shape & size

S&F foot board frame made out of 1st class hard wood (Teak) with 4mm thick OST plywood (Teak) as per existing shape & size

S&F stiffiner to support made out of 1st class hard wood (Teak) of size 40x60x880mm

S&F short rail frame of size 60x60x900mm made out of 1st class hard wood (Teak)

S&F leg of size 60x60x660mm made out of 1st class hard wood (Teak)

S&F flat iron 35x5mm 'L' shaped clamp bent to right angle and as required

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of chair wooden bottom without arm by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-56(M), FD-285

S&F of front leg of size 50x50x445mm high made out of 1st class hard wood (Teak)

S&F of rear leg of size 40x65x840mm high made out of 1st class hard wood (Teak)

S&F of front rail of size 25x65x415mm long made out of 1st class hard wood (Teak)

S&F of rear rail of size 25x65x375mm long made out of 1st class hard wood (Teak)

S&F of side rail of size 25x65x400mm long made out of 1st class hard wood (Teak)

S&F of back stiffner 15x50x375mm long (slightly curved) made out of 1st class hard wood (Teak)

S&F of stiffiner of size 20x25x400mm long made out of 1st class hard wood (Teak) 100mm high from bottom

S&F in replacement of seat made out of 6mm thick plywood BWR grade ISI marked with 6mm dia preparations to be provide to plywood seat as approved

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-279, FD-228

S&F of front leg of size 45x45x460mm high made out of 1st class hard wood (Teak)

S&F of rear leg of size 45x65x890mm high made out of 1st class hard wood (Teak)

S&F of stiffiner of size 25x19x400mm long made out of 1st class hard wood (Teak)

S&F of front rail of size 30x65x400mm long made out of 1st class hard wood (Teak)

S&F of rear rail of size 30x65x400mm long made out of 1st class hard wood (Teak)

S&F of side rail of size 30x65x380mm long made out of 1st class hard wood (Teak)

S&F of back stiffner of size 15x50x390mm long horizontal rest slightly curved in 'U' shape made out of 1st class hard wood (Teak)

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of trolley for TV by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/E6/MAP/04(R)

S&F top of size 750x600mm made out of 18mm thick prelaminated particle board with 4mm thick PVC edging all around

S&F back of size 650x650mm made out of 12mm thick prelaminated particle board

S&F side of size 500x650mm made out of 12mm thick prelaminated particle board

S&F shelves of size 500x610mm made out of 12mm thick prelaminated particle baord

S&F bottom of size 500x610mm made out of 12mm thick prelaminated particle board

S&F tray of size 600x500mm made out of 19mm thick prelaminated particle board

S&F shutter of size 610x310mm made out of 5.5mm thick plane glass fixed with suitable hinges and catcher

S&F telescopic channel for tray f size as per existing size and shape

S&F swivel type caster wheel 50mm dia as per existing

S&F CP handle 75mm long of approved design

M&L for carrying out repair and replacement of the following under-mentioned parts of sofa set (5/4 seater) with detachable cushion by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-281

S&F long rails of seat for 3 seater sofa of size 1590x100x35mm of 1st class hardwood (teak) duly plained and smoothened with sand paper

S&F side rails of seat for 3 seater sofa of size 575x100x35mm of 1st class hardwood (teak) duly plained and smoothened with sand paper

S&F long rails of back for 3 seater sofa of size 1590x100x35mm of 1st class hardwood (teak) duly plained and smoothened with sand paper

S&F long rails of seat for single seater sofa of size 590x100x35mm of 1st class hardwood (teak) duly plained and smoothened with sand paper

S&F side rails of seat for single seater sofa of size 575x100x35mm of 1st class hardwood (teak) duly plained and smoothened with sand paper

S&F long rails of back for single seater sofa of size 590x100x35mm of 1st class hardwood (teak) duly plained and smoothened with sand paper

S&F battens for single seater sofa of size 50x20mm of 1st class hardwood (teak) duly plained and smoothened with sand paper

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish for sofa set 3 seater

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish for sofa set single seater

M&L for carrying out repair and replacement of the following under-mentioned parts of table (900x600x760mm) with drawer by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-284

S&F leg of size 60x30x740mm high made out of 1st class HW (teak)

S&F stiffiner of size 25x40x600mm long made out of 1st class HW (teak)

S&F table top made out of 18/19mm thick plywood BRW grade of approved make confirming to IS with thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F long rail of size 20x60x900mm long made out of 1st class HW (teak)

S&F short rail of size 20x60x600mm long made out of 1st class HW (teak)

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of chair writing by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-280, FD-250

S&F front leg of size 55x30x660mm long made out of 1st class hard wood (Teak)

S&F rear leg of size 55x30x890mm long made out of 1st class hard wood (Teak)

S&F arms of size 55x19x495mm long made out of 1st class hard wood (Teak)

S&F rails of size 30x65x490mm long made out of 1st class hard wood (Teak)

S&F back stiffiner of size 12x50x445mm made out of 1st class hard wood (Teak)

S&F stiffiner of size 25x20x450mm made out of 1st class hard wood (Teak)

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of chair writing cushioned by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/E6/MAP/12

S&F in replacement of 50mm thick high density foam cushion for seat of size 425x400mm, edges trimmed duly covered with good quality tapestry cloth as approved

S&F in replacement 50mm thick high density foam cushion for back including 6mm thick foam cushion (HD) lining on back side

S&F in replacement of sSeat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425x400mm

S&F in replacement of back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400x300mm

S&F in replacement of handle as per existing size and shape as approved

Point welding to various parts as required

Applying one coat of 1st quality synthetic enamel paint colour OG/Black by spray machine including preparation of surfaces on existing frame work

M&L in replacement cushion 32 density, 100mm thick of 530x560mm size covered with tapestry cloth as approved

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining (cushioned) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/E6/MAP/10

S&F front leg of size 45mmx45mmx460mm high made out of 1st class hard wood (Teak)

S&F rear leg of size 45mmx65mmx890mm high made out of 1st class hard wood (Teak)

S&F front rail of size 30x65x400mm long made out of 1st class hard wood (Teak)

S&F side rail of size 30x65x400mm long made out of 1st class hard wood (Teak)

S&F rear rail of size 30x65x400mm long made out of 1st class hard wood (Teak)

S&F seat made out of high density foam cushion 50mm thick duly covered with tapestry cloth as approved

S&F back stiffner of size 15x50x390mm long horizontal rest slightly curved U shaped made out of 1st class hard wood (Teak)

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of chair easy by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-17(M), FD-229

S&F leg of size 55x25x535mm high made out of 1st class hard wood (Teak)

S&F front rails of size 25x70x520mm long made out of 1st class hard wood (Teak)

S&F side rails of size 25x70x520mm long made out of 1st class hard wood (Teak)

S&F rear rail of size 50x25x500mm long made out of 1st class hard wood (Teak)

S&F of back frame of size 55x20mm made out of 1st class hard wood (Teak)

S&F of arms of size 65x25x610mm long made out of 1st class hard wood (Teak)

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of side board by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-241

Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II with MS screws as per size and shape including 4mm thick teak wood beading all around

Back, 6mm thick plywood BWR of size 1220x625mm

Side 18mm thick plywood BWR of size 455x625mm

Drawers

Door of size 585x835x18mm BWR plywood

S&F chromium plated knob, best quality, of approved design and type

S&F long rail size of 25x45mm made out of 1st class hard wood (Teak)

S&F short rail size of 25x45mm made out of 1st class hard wood (Teak)

Shelves of size 455x835x18mm thick BWR plywood

Leg of size 45x45mm at top 25x25mm at bottom made out of 1st class hard wood (teak)

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of teapoy by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-278

S&F leg of size 60x30x532mm high made out of 1st class HW (teak)

S&F long rail of size 20x60x600mm long made out of 1st class HW (teak)

S&F short rail frame of size 20x60x450mm long made out of 1st class HW (teak)

S&F top of size 600x450mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of peg table by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-236, FD-277

S&F leg of size 30x50x370mm high made out of 1st class HW (teak) as per existing size & shape

S&F top long rail of size 20x40x450mm long made out of 1st class HW (teak)

S&F top short rail of size 20x40x300mm long made out of 1st class HW (teak)

S&F top of size 450x300mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F in replacement of stiffiner 2Nos. on bottom section to connecting legs in short side

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table bed side by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-276

S&F top 18mm thick BWR grade plywood of size 230x450mm fixed with 1mm thick laminated sheet at top

S&F backply 6mm thick BWR grade of size 510x450mm

S&F shelves 12mm thick BWR grade plywood teak face of size 230x450mm

S&F top 18mm thick BWR grade plywood of size 230x510mm fixed with 1mm thick laminated sheet at top

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table bed side by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/E6/MAP/15R

S&F leg made out of 18mm MS square pipe of 18 guage as per existing shape and size duly painted with black synthetic enamel paint

Top made out of 18mm thick prelaminated partical board of size 450mmx450mm including PVC edeging alround

Side made out of 18mm thick prelaminated partical board of size 500mmx450mm

Front shutter made out of 18mm thick prelaminated partical board of size 400mmx300mm

Bottom made out of 18mm thick prelaminated partical board of size 450mmx450mm

Back made out of 18mm thick prelaminated partical board of size600mmx450mm

Drawers of existing size shape and size

Telescopic channel for drawer as per exsiting size and shape

Auto closure hinges as per existing pattern

Handle chromium plated 75mm long of approved design and type

S&F plastic rubber shoe white/black best quality as per existing size and shape

M&L for carrying out repair and replacement of the following under-mentioned parts of table (900x600x760mm) with drawer by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-283

S&F leg of size 60x30x740mm high made out of 1st class hard wood (Teak)

S&F long rail of size 20x60x900mm long made out of 1st class hard wood (Teak)

S&F short rail of size 20x60x600mm long made out of 1st class hard wood (Teak)

S&F drawer as per existing shape & size made out of 1st class hard wood (Teak)

S&F chromium plated knob, best quality, of approved design and type

S&F table top made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F stiffiner of size 25x40x600mm long made out of 1st class HW (teak)

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table writing by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-275

S&F leg 35x55x732mm high made out of 1st class hard wood (Teak)

S&F top long rail 25x50x790mm long made out of 1st class hard wood (Teak)

S&F top short rail 25x50x600mm long made out of 1st class hard wood (Teak)

S&F bottom rail (side stiffener) 20x50x355mm long made out of 1st class hard wood (Teak)

S&F table top of size 1175x600mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F of foot rest (stiffner) (20x50x1145)mm long made out of 1st class hard wood (Teak)

S&F of drawer as per existing shape and size

S&F of back of table writing of size 355x732mm made out of 6mm thick BWR grade ply wood

S&F door of cupboard as per existing size & shape made out of 18mm thick prelamianted particle board with teak wood beading all around

S&F brass hinges 50mm long

S&F chromium plated knob, best quality, of approved design and type

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (6 persons) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-273

S&F top of size 1500x900mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F leg of size 40x75x732mm high made out of 1st class HW (teak)

S&F long rail of size 25x100x1500mm long made out of 1st class hard wood (Teak)

S&F short rail of size 25x100x900mm long made out of 1st class hard wood (Teak)

S&F traingular bracket (as support) made out of 1st class hard wood (Teak)

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (8 persons) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-273

S&F leg of size 40x75x732mm made out of 1st class HW (teak)

S&F table top of size 1800x900mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F triangular bracket (as support) made out of 1st class hard wood (teak) as per required shape & size

S&F long rail 25x100x1800mm made out of 1st class hard wood (teak)

S&F short rail 25x100x900mm made out of 1st class hard wood (teak)

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table dressing (ladies) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-251

S&F of long rail of size 40x25x900mm made out of 1st class hard wood (Teak)

S&F of short rail of size 40x25x380mm made out of 1st class hard wood (Teak)

S&F of drawer as per existing shape and size

S&F chromium plated knob, best quality, of approved design and type

S&F of telescopic channel for drawer as per existing size and shape

S&F chromium plated handle 75mm long of approved design and type

S&F replacement 5mm thick mirror of size 360x1220mm with 1st class hard wood (Teak) frame all around

S&F leg of size 45x45x75mm made out of 1st class hard wood (teak)

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table dressing (gents) with mirror by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-230

S&F table top made out of 18/19mm thick plywood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F bottom partition made of 18/19mm thick block board commercial type ISI marked f size 900x300mm

S&F of drawer as per existing shape and size

S&F chromium plated knob, best quality, of approved design and type

S&F key plate of existing size, approved design and type

S&F 5mm thick mirror of size 600x1200mm with 1st class hard wood (Teak) frame all around

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (1200x900mm) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-/E6/MAP/II/03

S&F table top of size 1200x900mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F leg of size 90x45x750mm heigh made out of 1st class hard wood (Teak)

S&F of long rail of size 45x90x1200mm long made out of 1st class hard wood (Teak)

S&F of short rail of size 45x90x900mm long made out of 1st class hard wood (Teak)

S&F stiffner sze 90x25x900mm made out of 2nd class hard wood (Teak)

S&F triangular bracket(as support) made out of 1st class hard wood (Teak) as per size and shape

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for carrying out repair and replacement of the following under-mentioned parts of table center by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-235, FD-274

S&F leg of size 45x45mm at top and 30x30mm at bottom and 372mm high made out of 1st class HW (teak)

S&F long rail of size 40x19x900mm long made out of 1st class HW (teak)

S&F short rail of size 40x19x450mm long made out of 1st class HW (teak)

S&F table top of size 900x450mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F plastic rubber shoe white/black best quality as per existing size and shape

Applying one coat of french polish including preparation of surfaces by smoothening, etc. as required for glossy finish

M&L for re-canning of chair dining with plastic cane (oval shaped), light coloured, 2mm wide in Godrej or as approved pattern complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-228, FD-279

M&L for re-canning of chair easy with plastic cane (oval shaped), light coloured, 2mm wide in Godrej or as approved pattern complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-17(M), FD-229

M&L for re-canning of chair writing with plastic cane (oval shaped), light coloured, 2mm wide in Godrej or as approved pattern complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-250, FD-280

M&L for re-canning of stool dressing CB with plastic cane (oval shaped), light coloured, 2mm wide in Godrej or as approved pattern complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-252

M/s Rajesh Kumar Jain

Anil jindal and sons

RG Builders

M/s Harmans