NIT-85 PMGSY Defect Liability Pck.No. Group-H, Block Dongargaon Dist. Rajnandgaon

Bill of Quantity (As per S.O.R. 22 FEBRUARY 2018)

No. of Roads - Arjuni to Medha Block- Dongargaon

Total Length :- 2.50 KM District - Rajnandgaon

Package No. :- Group H

S. No. SOR No. Particulars QTY UNIT RATE AMOUNT

1 11.12 (iii) Cutting of branches of trees shrubs and trimming of grass and weeds. Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 3750.00 Sqm 2.00 7500

2 11.2 (i) Maintenance of Earthen shoulder (filling with fresh selected soil). Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected material and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903 4500.00 Sqm 37.00 166500

3 11.5 Maintenance of WBM Road. Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and raveling as per technical specification Clause 1906. 1406.25 Sqm 212.00 298125

4 5.8(A) (II) Modified Penetration Macadam Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. , Viscosity grade (VG) Bitumen specification as per IS 73:2006 (A) 50 mm thick Bitumen (VG-30) 5512.50 Sqm 182.00 1003275

5 5.1 Prime coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 1406.25 Sqm 43.00 60469

6 11.14 (1) (i) Periodical Renewal to existing bituminous surface 1. Open graded Premix carpet 20 mm thick. (i) Tack coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. 8021.25 Sqm 13.00 104276

7 5.7 Type B(ii) Mix Seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509, Viscocity grade (VG) Bitumen specification as per IS 73:2006Type B (II) Bitumen (VG-30) 8021.25 Sqm 140.00 1122975

8 11.7(1) Maintenance of Culverts (I) Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 4 Nos 925.00 3700

9 11.9 Maintenance of Road Signs Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as perdrawings and technical specification Clause 1910 2.50 Km 1022.00 2555

10 9.8 Kilometre Stone. Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 0

(i) 5th Kilometre Stone (precast) 0 Each 3700.00 0

(ii) Ordinary Kilometer Stone (Precast) 4 Each 2194.00 8776

(iii) 200 m stone (precast) 10 Each 463.00 4630

11 9.2 A Cautionary, mandatory, informatory direction and place identification sign boards. A. Semi-Reflective Traffic signs upto 0.90 sqm Direction and place identification signs up to 0.9 sqm size board Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 2.25 SQM 4729.00 10640

12 11.13 White washing of parapet walls of CD work and tree truncks White washing two coats on parpet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 112 Sqm 17.00 1904

13 9.1 Printing New Letters and Figures of any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701 5000 per cm height per letter 0.57 2850

Add 18% GST 503672

Grand TOTAL 3301847

Say Rs. (A) :- 33.02