REPAIR MAINTENANCE OF WOODEN / STEEL FURNITURE INCLUDING POLISHING AND OTHER CONNECTED WORKS AT AIR FORCE STATION NATHATOP UNDER GE (AF) UDHAMPUR

Amount

WOODEN FURNITURE : Taking down worned out components of the following furniture items and S&F new component of first class teak wood duly finished and french polished without having any defect as per shape and size as specified and shown on respective drawings and as directed by Engineer-in-charge

BED plywood TOP WOODEN (FD 246) ,

Head rest complete

Foot Rest complete

Long rail

Short rail

Stiffener

Right angled MS bracket 200mm long x 25mm wide x 3mm thick duly fixed with screw

12mm thick BWR plywood top commercial of size 6 1/2'x3'x12 mm thick ISI Marked

CHAIR DINING (FD-279)

Rear Leg

Front Leg

Side rail with holes for weaving (spacing of holes shall be as per old one)

Front/back rail with holes for weaving (spacing of holes shall be as per old one)

Bottom stiffener

Back stiffener

Provn of wooden Triangular bracket of size 75mm x 75mm x25mm at joint of leg and rail each chair made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PVC/Rubber Shoe as per sample approved

CHAIR WRITING (FD-280)

Rear legs

Front Legs

Side rail with holes for weaving (spacing of holes shall be as per old one)

Front/back rail with holes for weaving (spacing of holes shall be as per old one)

Bottom stiffener

Back stiffener

Arm rest

Provn of wooden Triangular bracket of size 75x75x25mm at joint of leg and rail of chair made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PVC/Rubber Shoe as per sample approved

CHAIR EASY(FD-229)

Rear Leg

Front Leg

Side Rail

Front/Back Rail

Back Stiffener

Bottom Stiffner

Arms rest

PVC/Rubber Shoe as per sample approved

TABLE 900mm x 900mm (FD-291)

Long rail

Short rail

Top made of 18/19mm thick both side prelaminated particle board having surface colour as approved with PVC edge band tape/wooden beading with french polish to edges of the top as directed by Engineer-in-charge

Provn of wooden Triangular bracket of size 75mm x 75mm to made out of 35mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PVC/Rubber Shoe as per sample approved

TABLE 900mm x 600mm with / Without Drawer (FD-284 & 283)

Long Rail

Short Rail

Bottom Side stiffener

Bottom Centre stiffener

Drawer as specified in drawing

Provn of wooden Triangular bracket of size 75x75x25mm at joint of leg and rail of table made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated particle board having surface colour as approved with PVC edge band tape/wooden beading with french polish to edges of the top as directed by Engineer-in-charge

PVC/Rubber Shoe as per sample approved

CHAIR DINING Cushioned (Drg as appl)

Rear Leg

Front Legs

Side rail of seat frame

Front/back rails of seat frame

Removing of unserviceable cushion to seat and back rest made of 50mmx30mm thick rubberised foam of 32 density, letherite cloth and providing/fixing new cushion o seat and back rest made of 50mm/30mm thick rubberised foam of 32 density, letherite cloth as per drawing and as directed by Engr-in-Charge.

Bottom stiffener

Vertical back stiffener

Provn of wooden Triangular bracket of size 75x75x25mm at joint of leg and rail of chair made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PVC/Rubber Shoe as per sample approved

Sofa Set 3/4/5 Seats FD 281/1113 /FD/MAP-II/02 Supply wood and fixing of the fwg new parts after removing broken/unserviceable parts of well seasoned teak wood including tightening other parts of well seasoned teak wood with screw/bamboo pins only of the sofa complete all as specified in drawing & directed by Engineer-in-charge.

Front legs for three/single seater sofa

Rear legs for three/single seater sofa

Long front & Back rail for three seater sofa

Long front & Back rail for single seater sofa

Stiffner for three/single seater sofa

Side short rail for three/single seater sofa

Arms rest for three /single seater sofa.

plywood 10mm for three seater sofa.

plywood 10mm for single seater sofa.

Replacement of old unserviceable seat & back of Sofa set to sit 3 persons with new seat made of new foam cushion of sizes 530mmx560mmx100mm thick, 500mmx530mmx100mm thick, 32 density, of Make Sleepwell/kurlon/Coir foam/Coolfoam as approved by the GE duly covered with tapestry/velvet cloth of best quality of costing not less than Rs 400/- per mtr of any colour as approved by the GE, rest all as per drg and as directed.

All as per Item ser no 9.10 above but for sofa set 4 seater

All as per Item ser no 9.10 above but for sofa set 5 seater

Removal of unserviseable seat and back for Sofa set Three seater of tapestry cloth of 250GSM of approved make/shade duly providing quality Zip all asper specified and directed by tapestry/velvet cloth of best quality of costing not less than Rs 400/- per mtr of any colour as approved by the GE.

All as per Item ser no 9.13 above but for sofa set 4 seater

All as per Item ser no 9.13 above but for sofa set 5 seater

Chair Visitor of all models (TP) Repair to chair visitor with cushion of all models, including repair/replacement of seat, and back, welding of broken joints of frame of chair visitor to make the chair serviceable all as directed.

Chair Revolving Steel high back (TP)

Replacement of complete seat with new moulded foam cushioned 40mm thick of requirment density as shape and size and fixed over 12mm thick hot pressed plywood, covered with synthetic leatherate as approved and as directed by Engineer-in-charge

All as per item No 11.01 here-in-before but for back frame

Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Pedestal assembly complete

Twin wheel coasters press fitted at the bottom of leg.

Hydraulic system

Chair Verandah

Taking out old U/S cane and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge

Provn of Gas welding to the broken joints/parts upto 4-6 joints including provision of MS conduit pipe 15 mm dia (upto the length of approx 2 feet long) where required to complete the parts of frame of chair verandah including its smoothening for repainting/recanning all as per drg and as directed.

PVC/Rubber shoes as per sample approved

Charpoy GI Pipe with plywood top: (FD-220)

3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 grams

Galvanized iron check nut 32 mm dia. Note :- weight of each check nut shall not be less than 125 grams

Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed

Short rail converted out of retrieved Long rail, Item No 13.03 above incl cutting, threading as required and directed

Leg converted out of retrieved Short rail, Item No 13.04 above incl cutting, threading as required and and directed

Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail

Taking out old existing unserviceable plywood top from charpoy GI pipe and supply and fixing of new top made out of plywood commercial of size 6.5ftx3ftx12mm thick complete all as specified and directed. Make : Kitply/Greenply.

Replacement of existing rusted/corrosion flat iron strip with new flat iron strip of size 50mmx6mm with appropriate size headless bolt and nut on frame of charpoy GI pipe. Rest all as directed by Engr-in-Charge.

Table Writing FD- 275 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing/directed by Engr-in-Charge.

Table top new made of pre laminated particle board (exterior grade ) with teak face both sides of size 1145 x 600 x 18mm thick with 04 mm thick half round teak wood beading shall be provided all round.

Front and Back Rail

Side rail

Short & Long Stiffner

Drawers of table.

Cabinet Shutter/Door of table of size of 570mm x 405mm made out of 18mm thick prelaminated particle board (Exterior Grade) with teak wood beading shall be provided all round including continuous piano hinges 40mm wide upto Shutter height with screw.

Cabinet Sides of table made out of 18mm thick prelaminated particle board (Exterior Grade) duly fixed by screw.

Cabinet Back side of table made out of 6mm thick plywood to be fixed as per drawing.

Aluminium anodized knob 25mm of best quality.

Lock shall be of brass multipurpose 4 lever with duplicate key size 40 mm as shown in drg.

S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs and short rail to legs.

TEAPOY (FD-278/382)

Long rail

Short rail

Side stiffener

Centre stiffener

Top made of 18/19mm thick both side prelaminated particle board having surface colour as approved with PVC edge band tape/wooden beading with french polish to edges of the top as directed by Engineer-in-charge

PVC/Rubber Shoe as per sample approved

Provn of wooden Triangular bracket of size 75x75x30mm at joint of leg and rail of teapoy made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

All as per the description of serial item 15.06 above but top of Peg table.

All as per the description of serial item 15.06 above but top of Centre table

All as per the description of serial item 15.06 above but top of table dining 6 persons.

All as per the description of serial item 15.06 above but top of table dining 8 persons.

RE-CANNING OF CHAIRS : Re-canning of wooden chairs, Bin soiled linen as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge.

(Conversion of existing GI pipe charpoy with nylon newar to GI pipe charpoy with plywood top) Replacement of old existing unserviceable / damaged cotton / nylon newar from charpoy GI pipe with new plywood top following under mentioned steps, complete all as specified as directed by Engr-in-Charge. (a) Taking out old existing unserviceable / damaged cotton / nylon newar from both top of charpoy GI pipe and patti/ steel fasteners etc. (b) Fixing 02 Nos stiffernes of mild steel angle iron 25mmx25mmx3mm, 900mm long at equal distance and perpendulculoar to long rails of GI charpoy, fixing by drilling holes including counter sunk screws, nuts and washers at both ends on top side of long rails. (c) Drilling holes two nos of 7mm dia in each long rail, short rail and newly welded stiffener of miild steel anglle iron. (d) Top of charpoy with plywood, 12mm thick with seven No of ply, commercial, BWR grade, type BB, size 1980mm/900mm fixed to GI pipe frame with mild steel conter sunk screws, nuts and washers as two nos in each long rail, short and newly welded stiffeners of mild steel angle iron. (e) Painting of mild steel stifferners with two coats of synthetic enamel paints over one caot of zinc chrome prime after preparing the surface. (f) Preparation of the existing old decorated surfaces of charpoy GI pipe newar by removing of all dents and spray painting with one coat of synthetic enamel silver paint of approved quality on extrnal surface, complet all as specified and shown in the drawing and as directed by Engr-in-Charge.

STEEL FURNITURE : Taking down worned out components of the following steel furniture and S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge.

ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031) Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with two coat of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces.

Shelves made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces.

Six Levers brass lock Make : Godrej/Harrison/Link with duplicate keys

Three way Locking Device of 10 mm dia MS rod with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces.

Chromium plated Steel Handle 125mm.

Chromium plated MS Key plate fixed with screw and nuts.

Leg made of 1.6 mm thick MS sheet with Gas welding incl two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces.

Almirah Small/ Medium steel (FD-350 /1032/243)

Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces.

Shelves made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces.

Six Levers brass lock Make : Godrej/Harrison/Link with duplicate keys.

Three way Locking Device of 10 mm dia MS rod with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces.

Chromium plated Steel Handle 125mm.

Chromium plated MS Key plate fixed with screw and nuts.

Leg made of 1.6 mm thick MS sheet with Gas welding incl two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces.

Locker Bedside Steel ( FD-1029)

Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint overa coat of red oxide primer on both side after preparation of surfaces.

Shelves made of 1.0 mm thick MS sheet applied with two coats of synthetic enamel paint over a coat of red oxide primer on both side after preparation of surfaces.

Chromium plated 125mm Steel Handle 'D' type for Locker Bedside steel.

Leg made of 1.6 mm thick MS sheet with Gas welding incl two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces.

75mm Chromium plated hasp & stapple fixed with rivets of locker steel.

Hanging Rod of 1.6mm thick chromium plated MS Rod.

TABLE OFFICE CLERK (FD-1004)

Table office clk steel, (a) Provn of gas welding to broken joints/parts (upto 5-8 joints) of frame of Table office clerk steel including repair/replacement of weak/damaged portions (upto 2 feet to 4 feet long) where required made to shape and size all as per drg including its smoothening and preparation of old decorated surface of complete frame by filling up putty etc for its painting and providing two coats of synthetic enameled paint with sprayer as required to complete frame of each table clerk steel complete specified & directed .

Replacement of existing old unserviceable broken base of cup board of Table office clerk steel with PBI sheet of 1.00 mm thick, made to shape and size all as specified in drg and as directed by Engineer-in-Charge.

Six levers Lock of Godrej/Harrison with duplicate keys.

Taking out existing old broken/unserviceable table top and supply and fixing with new table top of table office clerk steel made of 18/19mm thick both side prelaminated particle board (conforming to IS specifications) exterior grade (teak shade in upper side and white shade in lower side) including 4mm thick teak wood beading all round the top duly polished with French polish and providing PVC hard rubber shoes of required size to each legs of table complete all as specified & directed.

PVC Shoe at bottom of the leg of the Table

CHARPOY IP WITH PLYTOP (FD/MAP-II/01)

12 mm thick ply wood top bwr grade isi marked of size 1950mm x 900mm (single piece) to be fixed to frame with MS nuts & screws

PVC shoe at botton of the leg of the Charpoy

Painting of steel furniture:- Removing of old paint by paint remover/scrapper/blow lamp etc including cleaning dirt and rust and preparation of old decorated surface by filling up putty etc where required and its smoothening for painting to the following steel furniture items and applying two coats of synthetic enamelled paint by using spray machine both internally and externally complete all as specified & direcct.

Almirah Steel Large with Shelves, FD-351/1031

Almirah Small/medium steel (FD-350 /1032/243)

Locker Bedside Steel ( FD-257/1029)

Table office clerk steel (FD-1007)

Table office officer steel

Rack side steel

Book shelf open large steel (Rack 6 tier)

Book shelf open large steel (Rack 3 tier)

Book shelf open small steel

MS rack 5 1/2'x2 1/2'x2' with shelves

MS rack 16x2 1/2'x2' with shelves

Polishing of Wooden Furniture Items : All wooden surfaces of the following wooden furniture items wheather exposed to view or not when placed in position shall be polished with high gloss french polish to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and filled with putty complete all as specified & directed.

Bed plywood top wooden - FD 246

Chair Dining

Chair Writing

Peg Table

Table Dining 6 presons (FD-239/273)

Table Dining 8 presons (FD-273)

Chair dining with long back

Chair Easy

Table Writing

Table 900x900x600mm

Sofa Set 5 Seater (FD-281/373/FD/MAP-II/02)

M/S SHARMA TRADERS

KHAJURIA BUILDERS