Supply of T AND P Items i.e. Hedge Trimmer, Brush Cutter AND Pole Pruner for Ward No. 88/KBZ

Hedge Trimmer • Engine: 2 Stroke, Single Cylinder, Air Cooled • Engine Displacement: Should be between 20–25 CC • Power Output: Should be minimum 1 HP • Fuel Tank Capacity: Minimum 400 ml • Weight: Should not be more than 6.0 KG • Clutch: Clutch lining should be metal only • Handle: Must have rotating multi-function handle • Anti Vibration System: Must have spring loaded technology for Anti Vibration System • Design: Should have double sided blade with tooth spacing minimum 35 mm • Bar Length: Minimum 600 mm • Blade: Should have chrome plated anti-corrosion coating • Stroke Rate (/min): Minimum 3000 • Vibration Level m/s² at Right Handle: Should not be more than 3.5 m/s² • Sound Pressure Level [dB(A)]: Should not be more than 95 • Certification: Should have TUV with EN ISO 10517:2009

Brush Cutter • Engine: Single Cylinder, 2 Stroke, Aircooled only • Engine Displacement: 40.2 CC • Power Output: 2 kW / 2.7 HP • Max Output Shaft Speed at Cutting Attachment: Should be minimum 9000 RPM • Carburetor: Diaphragm with compensator technology • Fuel Tank Capacity: Minimum 600 ml • Weight (Dry, without cutting attachment & deflector): Should not be more than 7.5 Kg • Clutch: Centrifugal Type, clutch shoe support base & lining metal only • Multi Function Handle: Should have acceleration, ON/OFF switch at right handle • Brushcutter Harness: Should be double shoulder harness only • Anti Vibration System: Must have 4-point anti vibration system • Vibration Level in m/s² at right handle: Should not be more than 2.5 m/s² • Sound Pressure Level dB(A): Should not be more than 105 dB(A) • Drive Shaft Design

Petrol Operated Pole Prunner • Engine: Single Cylinder, 2 Stroke, Air Cooled Only • Displacement: Should be between 25–30 CC • Power Output: Should be minimum 1.2 HP • Weight (Dry without cutting attachment & fuel): Should not be more than 7.5 Kg • Fuel Tank Capacity (ml): Should be minimum 400 ml • Chain Oil Capacity (ml): Must have minimum 200 ml • Clutch: Clutch shoe lining should be metal only • Guide Bar Length: Minimum 30 cm • Guide Bar and Chain: Should have same manufacture only • Chain Type: Every drive link need groove & small oil holes for better lubrication. Saw chain pitch should be 1/4" or 3/8 pico only and drive link thickness must have 1.1 mm or 1.3 mm • Max Output Shaft Speed (RPM): Should be minimum 8000 RPM at chain sprocket • Equipment Total Length with Guide Bar and Chain (cm): Should be minimum 270 cm compressed & total length of equipment minimum 350 cm extended • Sound Pressure Level [dB(A)]: Should not be more than 95 dB(A) • Vibration Measurement m/s² at Control Handle (Extended Position): Should not be more than 3.5 m/s² • Certification: Must have TUV certification with test standard EN ISO 11680