ADDITION / ALTERATION OF TOILETS OF BLDG NO P-05 / FH (SERVANT QUARTER) AT HALDIGHATI LINE AT JAIPUR MIL STATION

Amount

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I 1000 Litres Capacity complete all as specified and directed.

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair

S&F in repair galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore

20 mm bore

25 mm bore

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM(1:4) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed.

Taking down Chowkhat or frames with shutter (without taking off shutters) exc 1.5 Sqm but n.exc 4 sqm each.

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified and directed.

35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & stile as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated complete all as specified and directed.

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embedded portion of holdfast n. exc half brick complete all as specified and directed.

Mild steel butt hinges medium weight, cold rolled size of hinge 100 mm long.

Mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with & including a minimum of 6 bolt & nut four on bolt plate & 2 on staple plate & fixed length of bolt 300 mm complete all as specified and directed.

Mild steel pressed handle oval type stove enameled black 125mm size.

Mild steel tower bolt, stove enameled black with bright bolt, length of bolt 150mm.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed.

Excavation in Post holes in soft/ loose soil each not exc 0.5 cum getting out,returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm complete all as specified and directed.

M&L for Plain cement concrete1:3:6 Type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st 240 complete all as specified and directed.

S&F Pre Painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified.

S&F anodised Aluminium snap grid frame work of grid size 605 x 605mm for false ceilling all as specified.

M&L for Exposed metal frame ceilling with calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceilling shall be measured and paid seperately complete all as specified and directed.

M&L for Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L 75 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Dismantling of floor /skirting ( terrazzo/ PCC / Ceramic Tiles) including cement mortar bedding (but not backing ) and removing the rubbish from the site complete all as specified and directed.

M&L Coloured Glazed ceramic tiles size 300x450 x 7mm thick edge cut/ joint free , on walls etc. set & jointed in neat cement slurry & pointed in white/coloured cement to match over and including 15mm thick plaster in CM(1:4) complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM(1:4)

M&L coloured Non skid ceramic tiles 7 to 8 mm thick square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM(1:4) completed all as specified and directed.

M&L For hardcore of gauge not exceeding 63mm deposited, spread ,and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia

S&F PVC (SWR) bends any radius 110mm dia

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia

S&F PVC (SWR) vent cowl 110mm dia

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets, coupling and waste pipe complete all as specified and directed.

S&F in Repair stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type) of 15 mm complete all as specified and directed.

S&F in repairs brass CP Angle stop cock fancy type concealed type long body,15 mm bore complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs for 15mm bore dia of pipe complete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated for 15mm bore dia of pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm

S&F in repairs brass Chromium plated Overhead shower 110mm round with relvoling joint and 115mm long shower arm with rabit cleanign system and all fitting complete all as specified and directed.

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Litre capacity complete all as specified and directed.

S&F in repair Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

All as per item No 49 above but of 25mm bore

S&F in repairs PTMT grating doom 125mm dia of weight not less than 40gm for floor trap / Nahani trap.

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover with mild steel chromium plated or aluminised hinging device including connection to drowm pipe and flushing pipe all as specified and directed.

S&F in repairs counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mm including all fittings complete all as specified. Make : Jaquar Cat No. CON -FSS-WHT-29601/ Kohler Cat No. K-4126K-00/ Roca Cat part No. RS327875001

S&F in repairs Soap dish vitreous china white approximate size 160 x 160 x 90mm complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Excavation in trenches not exc.1.5 m wide and not exc.1.5 m in depth for foundation or for shafts, walls, manholes etc not exc.10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in concealed pvc conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box modular type for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings :-

One light/fan/ bell point controlled by one, one way switch.

One 3 pin 5 Amp socket outlet on same board with other switches.

One 3 pin 5 Amp socket outlet on independent board with other switches.

All as per Item No 61 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly.

S&F switch, piano type 230/250 volts

Single pole, one way 6 Amp rating

Single pole, one way 16 Amp rating

S&F Socket, piano type 230/250 volts

Socket outlet 2-in-1, 3 pin 06 Amp

Socket outlet 2-in-1, 3 pin 16 Amp

S&F ceiling rose 3 pin (phase,neutral and earth polycarbonate body complete.

Supply & fix LED retrofit lamp 20 Watt ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

Supply & fix LED retrofit lamp 10 Watt ( size-2 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

S&F LED 35 watt street light smartbrite aluminium PDC housing with IK 07 protection PC glossy diffuser duly prewired connection having a nominal system lumen output of efficiency 100 lumens/ watt light watt and total power consumption not more than 35 watt including driver. It has a rated IP 66 with 5 KV inbuilt surge protectione all as specified and directed.

S&F in repair factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar all as specified and directed.

S&F in repair factory made, sheet distribution boards, TP&N 4 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar , complete all as specified and as directed.

S&F in repair MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps.

SPN 32 to 63 amps.

TPN 63 amps 16 KA rating

M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit medium grade not less than 20mm size and conduit accessories fixed on surface of wall/ celing etc including provision of 1 run of 6 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity complete all as specified and directed. Note - 2 Run of 6 Sqmm + 01 Run of 6 Sqm earth wire and 1 RM conduit will be measured as one unit.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 32 mm dia " light grade " earth plate surrounded by packed layer of coal dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge . Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

Supply, Laying, Jointing, testing & commissioning LT under ground electric cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI 7098) laid in trenches, ducts, pipes or fixed on pole etc including taking down of u/s cable of size 25 Sqmm, 4 Core cable

M&L for sand cushioning to PVC under ground cable with natural river/tibba sand and jently punning down to provide a required cover as specified.

M&L bricks for protection cover to under ground cable (with old size sub class ‘B’ bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm as directed by Engineer-in-Charge.

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt, complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply, installing ,testing and commissioning stationary storage type electric water heater( geyser) 25 Litre capacity BEE 5 star rating inbuilt current leakage protection device, multifunction safety valve, high precision thermostat control,Preset thermal output, high working pressure 0.8 MPa,vertical mounting including min 2 yrs warrenty complete all as specified and directed.

m/s lovely cool air (BID ID -3120091)

Stuti Trading Company (BID ID -3114383)

MSR INFRATECH (BID ID -3132032)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3139503)

PUSHPA G ENTERPRISES (BID ID -3132435)

S.R.Enterprises (BID ID -3132779)