Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹37.9 L
EMD Value
₹75,720
Closing Date
8 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE(South) Bangalore
GARRISON ENGINEER (SOUTH) NO 1 ULSOOR ROAD BANGALORE 42
SPECIAL REPAIR TO UG SUMP NO.02 AND PUMP HOUSE AT KR BK UNDER GE (SOUTH) BANGALORE
2026_MES_799264_1
8184/E8
Open Tender
Civil Works
Works
180 days
GE(South) Bangalore
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(South) Bangalore
₹75,720
Yes
18 Nov 2026
18 Nov 2026
10 Dec 2026
18 Nov 2026
8 Dec 2026
2 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed. | 560 | Sqm | 100 | ₹56,000 |
| 2 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq metre | 300 | Sqm | 10 | ₹3,000 |
| 3 | Surface preparation by removing loose concrete by gentle chipping until the hard concrete is exposed leaning of exposed surface thoroughly with air /water jet to get solid surface of walls, ceiling etc. | 200 | Sqm | 10 | ₹2,000 |
| 4 | M&L for Ready mix concrete (design mix), M-30 grade in foundation, including raft footings, foundation beams, plinth beams, bases for column etc., basement slabs, underreamed piles, flooring and mass concrete complete all as specified and as directed. | 32 | Cum | 10 | ₹320 |
| 5 | M&L for Cleaning the existing reinforcement with hammer tapping and wire Brush/ rotary wire brush, fixed to hand drill machine, making the surfaces free form loose corrosion material, dirt scalling etc. complete. Applying two coats of polymer based alkaline rust converting primer confirming to ASTM-B 117 by means of paint brush, liberally all over in two coats of 1 hour between the costs, The product should converts the rust in to stable organo metallic complex molicule layer, this should also act as primer to further treatment of steel etc. complete. The work should be carried out with all the safety belt and adequate labour insurance under the supervision of qualifed supervisor etc. complete. | 150 | Sqm | 10 | ₹1,500 |
| 6 | Providing and applying Epoxy Phenolic Based anti-corrosive coating in 2 coats with time interval of minimum 6 hours. The coating shall have ECorr value of -45 mV against SCE in 3.5 NaCL for 100 hours and electrochemical evaluation of max 0.5 mA /cm2. This coating shall be applied over coated rebars. Coated rebars are aloowed to be cure in air for Minimum 48 hours oras per manufacturer’s specification as direction of Engineer in-charge. | 300 | RM | 10 | ₹3,000 |
| 7 | Providing and applying concrete penetrating, migratory bipolar corrosion inhibitor conforming to ASTMG-109) by brush/spray with dosage of 4 Sqm/ ltr, over the entire chipped off / exposed concrete area including material, equipment, labour etc. complete in order to arrest further corrosion of reinforcement bars. The application of Bipolar corrosion inhibitor should reduce the corrosion in terms of coulombs by 30% minimum upon migration through the embedded side of concrete as measured. | 200 | Sqm | 10 | ₹2,000 |
| 8 | S&F Welded steel wire fabric complete to concrete using concrete nails weigh n exc 4 Kg per sqm. | 100 | Kg | 10 | ₹1,000 |
| 9 | M&L for Providing 50mm thick (average) ready to use polymer modified mortar in two layers on the exposed concrete surface sandwiched by a layer of weld mesh fixed to concrete using concrete nails.
Note - Weld mesh shall be measured and paid seperately. Speciality Coatings Pvt. Ltd. | 267 | Sqm | 10 | ₹2,670 |
| 10 | Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface as per directed and complete. | 70 | RM | 10 | ₹700 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
Tenderdocument8184.pdf
Tender Documents • 1.03 MB
BOQ_896727.xls
BOQ • 8.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .