Balance work of Ayurvedic Dispensary at Raan SH Balance work of Building portion, water supply Sanitary installation etc.

Amount

Reinforced cement concrete work of grade M-20 (M-Twenty five) design mix to obtain the minimum compressive strength of 20N/mm square with cement contents not less than 400 Kilogram (four hundred kilograms) michanically mixed in beams, suspended floors, roofs having slope up to 15° (fifteen degree) landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, huttering, finishing and reinforcement as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 35mm thick (forty millimetre) panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws with 2nd class teak wood.. as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing M.S. plain grills 10x10mm (ten into ten millimetre) square or round bars in combination of 20x4mm (twenty into four millimetre) M.S. flat as per detail of required pattern in frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 40 mm (forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five Gauge) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windows including with necessary screws complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 35 mm (Thirty five millimeter) thick ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 250 X 10 mm (two hundred fifty into ten millimetre)as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 150 X 10 mm (One hundred fifty into ten millimetre)as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium handles 150mm (One hundred fifty millimetre) anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government

Providing and fixing aluminium handles 100 mm (One hundred millimetre) anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg to 80kg ( thirty kilogram to eighty kilogram ) and door width upto 701 mm to 1000 mm ( seven hundred one millimetre to one thousend millimetre) , with necessary accessories and screws etcetera complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 10mm (ten millimetre) thick antiskid water proof stain and impact resistant heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (tewelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer- Incharge. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Applying priming coat of over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink or Gray as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting Wood work with Deluxe Multi Surface Paint of Asian/Nerolac to give an even shade (Two or more coats) applied @ 0.90 ltr/ 10 sqm Zero point nine zero liters per ten sqaure metre) over an under coat of primer applied @ 0.75 ltr/10 sqm Zero point seven zero liters per ten sqaure metre) as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm ( one millimetre ) of approved brand and manufactered wall surface to prepare the surface even and smooth complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing walls with 100% (One hundred percent) Premium acrylic emulsion paint (Two or more coats) having VOC less than 50 gm/litre (Fifty grams per liter) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre per ten square metre) upto all floor level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with Premium emulsion paint of Asian / Dulux /Berger paints/Nerolac paints of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint of asian/Nerolac to give an even shade (Two or more coats) applied @ 0.90 ltr/ 10 sqm (Zero point nine zero liters per ten sqaure metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (Zero point eight zero liters per ten sqaure mere) of approved brand and manufacture as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.62mm (zero point sixity two millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating of TATA Durashine / SAIL/ RELIANCE/ ZINDAL STEEL including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing plain M.S. B.P. sheet 2.00 mm (Two decimal zero millimeter) thick fixed in eaves board / facia / soffits /ceiling including cutting, fixing and welding to steel rafter, member and applying a coat of red lead primer with gas/ electric welding in position complete (frame work is to be measured and paid for separately) within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing terrazzo tiles 20mm ( twenty millimetre) thick ( with marble chips of specifiedsizes) in skirting and risers of steps not exceeding 30 cm ( thirty ceintimtre) in hight on 10 mm ( ten millimetre ) thick cement plaster 1:3 ( one cement is to three sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles ( wherever required ) including rubbing and polishing complete with tiles of following shades including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing and laying course rubble hammer dressed 'U' shape open surface Drain with side wall 15x22 cm ( fifteen in to twenty two cenitimetre in cement mortar 1:6 ( one cement is to six sand ) and inside plastring with cement plaster 1:3 ( One cement is to three sand ) including earth work and laying 10 cm ( ten cenitimetre) cement concrete in 1:5:10 ( one cement is to five sand is to ten graded stone aggregate ) of 40mm ( forty millimetre) nominal size and 7.5 cm cement ( seven decimal five centimetre ) cement concrete 1:2:4 ( one cement is to two sand is to four graded stone aggregate ) of 20mm nominal size and finished with a floating coat cemment complete as per standrad design including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing Second class half brick work with cement mortar 1:6 ( one cement is to six sand ) using common burnt clay building bricks in super structure upto all floor level including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm ( forty millimetre ) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing and fixing PVC floor trap ISI marked for self cleaning design,sized ( 110*90 mm ( One hundred ten in to ninety ) including fixing with approved adhesive,cost of cutting and making good the wall and floors etc.including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing and fixing 110 mm ( One hundred ten millimetre ) PVC P & S trap for water closet ISI marked of Including jointing the trap with pan and PVC pipe with approved adhesive etc. including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing and fixing vitreous china wash basin Delta No 100.10 of cera/Hindware 55x40 Cm ( fifty five in to forty centimetre ) with single hole for pillar tap with pedestal including C.I or M.S brackets painted white including cutting holes and making good the same including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing and fixing PVC reducer sized 110*90 mm ( one hundred ten into ninety millimetre ) ISI marked including jointing with approved adhesive etc.within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing CP connection pipe with brass union sized 45 cm ( forty five centimetre ) length and 15 mm ( fifteen millimetre ) nominal bore. within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing CP brass waste pipe for wash basin or sink etc. 32mm nominal dia etc. complete.within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing brass union to connect lead to lead including two shoulder joints 15 mm( fifteen millimetre) nominal bore within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and Fixing brass full wave valve with wheel 15 mm ( fifteen millimetre ) nominal bore etc. within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing CP bevelled edge mirror sized 600*450 mm ( six hundred in to four hundred fifty millimetre ) of superior glass mounted on 6 mm (six millimetre ) AC sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washer etc. within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing bib tap with superior and heavy duty 15 mm ( fifteen millimetre ) nominal dia Complete. within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing CP brass pillar tap with capastan head 15 mm ( fifteen millimetre ) nominal dia complete etc.within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre ) nominal bore to wall,ceiling and floor galvanised mild steel tubes of medium grade including fitting etc. within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC water storage tank of ISI 12701 marked ,GI inlet and outlet connection 15mm ( fifteen millimetre ) nominal bore ball valve and mosquito proof cover with locking arrangment including hosting upto all heights above ground level 1000 lt ( one thousend liter ) capacity within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing high pressure waste PVC waste and ventilating pipeof 90 mm ( ninety millimetre ) dia ISI marked including fixing with approved adhesive etc. . within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC collars 90 mm ( ninety millimetre ) dia ISI marked including fixing with approved adhesive etc of .within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing of 90 mm ( ninety millimetre ) dia.PVC plain bend ISI marked including fixing with approved adhesive ect within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm ( one hundred millimetre ) sand cast iron grating for gully, floor and nahni trap.within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr. ( one decimal five metre ) tube as per direction o Engineer in charge.within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P brass brackets fixed to wooden plug with C.P brass screws etc within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600 x 20 mm ( six hundred in to twenty millimetre ) size C.P Hindware/cera/Jaquar or equivalent brass towel rail complete with C.P brass brackets fixed to wooden plugs with brass screw within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

suman kumar thakur