Construction of 5 Nos. Bus Queue Shelters at Various road of MC Fatehabad.

Amount

Providing and fixing anodized aluminium 25 x 50mm channelo frame with 40 w standard manufactured tube lightr fittings with electronic choke starters and wiring all complete connectin to electrical supply drom feeder box with minimum 4 tubelights x per square meter (of add panel size ) or actual requirement decided by the engineer in charge. The tube light includeballast ELCB timer MCB mounting blocks etc. The tube light alignment should allow two way lighting (front and back) of add panel complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Providing and fixing heavy duty SS prefabricated dust bins with canopy and two point support grouted in cement mortar and finished as per floor finish complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Providing and pasting at site high grade printed vinyl with bus shelter name logo, route number etd. On one sides of the front facia informatin board. The vinyl shall be minimum 85 micron thick, of LG or equivalent make complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Providing and fixing mefium grade MS junction boxes in cast in situ foundation beam of 150 x 150 mm size complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Vandal resistant light source of polycarbonate body with compact fluorescent lamp of white NS colour of 55w of approved make with IP 67 approval, including cable fixing,switchgear etc. all complete complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Providing and fixing MS electrical weather proof leader box approximately 600mm wide and 900mm high as required for installing MCB switch gear and meters as required for advertisement and other electrical gear, with provision for inserting cable conduits as per design. The access to feeder box shall be through a toll based (common for all locks, provided in each package) key. Tools should not be identical for different package shelters complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Supplying and fixing 5-walled, 10mm thick polycarbonate multiwall sheet bronze colour having a light transmission of 37% with a U-value of 2.39 w/m2 K.Lexan thermoclear multiwall sheet LT2UV105R175 from SABIC innovative plastics or Equivalent. Fixing of the 10 mm sheet to be done with profiles having EPDM/silicon. Aluminum profiles need to be used and front and rear of polycarbonate sheet has to be closed by aluminum profile complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Supplying and fixing of double sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 5.3 to 5.5kg/m with minimum tensile strenght 22000 psl as per drawing provided having 4mm clear solid compact polycarbonate on both side and reinforced with internal support frame, completely sealed with the help of silicon and EPDM to make it dust and waer proof. should have the inbuilt strong clipping and frame arrangement for holding the flex of digital media alongwith all necessary cleats and corner joinery required to build the signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60 micron, signage should have inbuilt arrangement of mounting it with the bus shelter structure. The enclosure should provide weather proof protection required for the signage to operate outdoors, having inbuilt ventilation systems. (Measurements for double sided signage to be taken for both sides during ) complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Supplying and fixing single sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 3.80 to 4.00kg/m with minimum tensile strenght 22000 psl as per drawing provided having 4mm clear solid compact polycarbonate in front and 3mm ACP sheet reinforced with internal support frame at rear completely sealed with the of silicon and EPDM to make it dust and water proof should have the inbuilt strong clopping and frame arrangement for holding the flex or digital imedia alongwith all necessary cleats and corner joinery required to build thus signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft.the aluminum frame should have polyster powder coating with minimum thickness of 60 micron. Signage should have inbuilt arrangement of mounting it with the bus shelter stracture. The encloser should provide weather proof protection required for the signage to oprate outdoors, having inbuilt ventilation system complete in all respect up to entire satisfaction of engineer-in-charge.(including all taxes and Contractor profit)

Bidder Name

Amount

The jai shri mata ji coop L/C Society Ltd. (GSTN-NA) BID ID -1220000

The Rakhi Sahapur Coop L and C Society Ltd. (GSTN-NA) BID ID -1220268

The Adampur Goodluck Coop. L&C Society Ltd. Adampur (GSTN-NA) BID ID -1220049

The Rakhi Sahapur Coop L and C Society Ltd. (BID ID -1220268)

The jai shri mata ji coop L/C Society Ltd. (BID ID -1220000)

The Adampur Goodluck Coop. L&C Society Ltd. Adampur (BID ID -1220049)

The Rakhi Sahapur Coop L and C Society Ltd. (BID ID -1220268)