Construction of new pond near FSTP plant at Rangiagada in Ward No. 13

Supplying all materials labour T&P Excavation of any available type of soil by mechanical means loading into and transportation by mechanical means and unloading the soil within the pond Area on properly prepared and scintifically approved surface including spreading and levelling the earth in 22.5 cm layers to make ready for watering and compaction in dams and dykes for all heights including construction maintenance watering and lighting of haul road and borrow area etc. complete as poer the required specification and direction of Engineer-in-

Providing, laying, spreading and compacting including spreading in uniform ,rolling with 3 wheeled steel roller 8-10 tonnes in all stages

Earth work excavation of foundation in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift icluding rough dressing and bracking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per the direction of the EIC. 06

Providing spreading, filling in foundation and plinth with sand watered and rammed as per OPWD specification including cost of materials, labour, conveyance, royalty, Tools and Plants etc.all complete required for the work to finished items of work. 18

PCC (1:3:6) with 40 mm size CBHG metal including all cost of materials, labour, conveyance, royalty, T&P, water for curing etc all complete. 37

PCC (1:2:4) with 12 mm size CBHGC including hosting and laying all cost of materials, labour,conveyance, royalty, Tools and Plants water for curing etc.all complete. 39

Rigid and smooth centering and shuttering for CC/ RCC works in foundation, plinth band and footings bases of columns mass concrete pre-cast slabs etc including false work and dismentalling then after casting including cost of materials, cess complete in ground floor. 67

6 mm thick cement plaster in cement morter (1:4) including cement punning and all cost of materials, labour, conveyance, royalty, cess, Tools and Plants water for curing etc.all complete, as per OPWD specification required for the work to finished items of work. 175

Providing and laying at or near ground level factory made kerb stone of M30 grade cement concrete 600mm x 300mm x150mm in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of EIC. (See Item no 16.69 of DSR & Item no 3 of AoR 2006)

Providing, spreading, laying on road surface and compacting, proper camber layer of paver inter locking blocks minimum 60 mm thickness and inscribed machine mixed and compacted having crushing strength not less then M30 including filling the interstices with sand, watering, brooming, bliding and consolidation with wooden hammer as per OPWD specification and relevent code including cost of materials, conveyance, royality, labour, cess, T&P required to the work etc. complete to finished items. 97

Blinding road surface with crusher dust including cost and conveyance of materials T&P etc 221

Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the material with water at OMC in machanical mix plant, carriage of mixed material by tripper to site, laying in uniform layers with p 242

Supplying and irrection of CC Chair including cost of chair, labour and materials etc all complete as per direction of EIC

Supplying, providing all labour, materials T&P and plantation work of following plant including cost of plant, labour and materials etc all complete as per direction of EIC.

Cost of Primer,Paint,Painting & Letter writing over Disply board 303