PROVISION OF GUARD ROOM 01JCO 08 OR AT ENTRY GATE EAST OF AEPTA AND MED EXAM HALL 18X12 WITH ATT BATHROOM FOR WOMEN ASPIRANTS TO ENROL IN CMP AT ARO MUZAFFARPUR UNDER GE DANAPUR CANTT

Surface dressing n exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering (for floor rising due to water logging area) complete all as specified and directed.

Boring holes 5m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300 mm) complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Returning Filling in, including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type-D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete sub base as in floors complete all as specified and directed.

M&L 40 mm thick damp proof course to horizontal or vertical surfaces including necessary form work in plain cement concrete 1:2:4, type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for hard core of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick with broken bricks, watered and rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate ) as in floor, finishing cement concrete surfacs even and fare without using extra cement complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20 mm graded stone aggregate) in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in columns, pillars, posts, struts etc complete.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete.

M&L RCC reinforced cement concrete (M-25 Design mix) (20mm graded aggregate) as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for flat rough finished surfaces of concrete.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete.

M&L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished, square, rectangular or polygonal surfaces of concrete complete all as specified and directed.

Form work to edges of concrete flats, treads, breaks in floors window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as spd and as directed.

S&F Mild Steel, TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips all as specified

All as per item No 23 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders

M&L 15 mm thick rendering in two layers (10mm & 5mm ) on fair faces of bk / concrete surfaces in cm (1:4) with WPC (WPC measured & paid separetely) finished even and smooth (Without using extra cement) complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked.

M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed.

M&L rendering 5mm thick in CM 1:3 on concrete surfaces/ chajja/ ceiling, etc finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 3mm thick wall care putty including preparation complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of Oil Bound Distemper of any light shade complete all as specified and directed.

M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white cement mixed with pigment to match shade of tile over and including15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed white cement mixed with pigment to match shade of tile over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed ceramics coloured tiles of size 450x350x7mm thick on vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white white cement mixed with pigment to match shade of tile over and including 10mm thick plaster in CM (1:4)complete all as specified and directed.

S&F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts (each shutter having two tower bolts 100mm long) complete with glazing bars dovetailed or welded complete all as specified and directed.

All as per above item No 38 but without glazing bars

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.

S & F of pressed steel frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plates etc complete all as specified and directed.

S & F, Solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prlam sheet, reinforced with MS square tube, supplying and fixing in opening complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.

M&L PCC 1:3:6 type C-1 using 20 mm grade stone aggregate as in filling in holes of hold fasts complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps,plain angle cleats for securing purlins to wood trusses or rafters, and similar small conforming to Fe 410-0 or Fe 310-0.

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as spd.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane of 3mm thick.

S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as spd.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Aluminium handles, cast type, anodized 150 mm size ISI Marked complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. Complete all as specified and directed.

Roughening surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc complete all as specified and directed.

M&L brushing neat cement slurry with 3 kg of cement per square meter complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement including taking down of complete existing cement plaster etc complete all as specified. (Note : WPC will be measured & paid for separately).

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

Properly cleaning and drying concrete surfaces.

Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.

Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.

Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.

Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete all as specifed and directed.

S&F CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specifed and directed.

S&F in Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specifed and directed.

Supply and fixed shower rose brass chromium plated with swivel joints, 125 mm size, fixing to steel pipe or union complete all as specifed and directed.

S&F Stop valves, cast copper alloy chromium plated fancy type, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specifed and directed.

S&F stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specifed and directed.

S&F Bib taps, cast copper alloy, chromium plated , fancy type long body, screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specifed and directed.

S&F 15mm bore angle cock, cast copper alloy CP, fancy type high presure with capstan head handle, screwed both ends for iron pipe of for unions complete all as specifed and directed.

S&F white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets and PVC connection 600mm long with CP brass nuts on both sides complete all as specifed and directed.

S&F plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specifed and directed.

Supply and laying of 16 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified.

Supply and laying of 20 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity complete all specified and directed.

S&F ball valves high pressure of brass with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm dia (min weight-210 gms) complete all as specifed and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

All as per item No 74 but 75mm bore incl rubber ring joint with sovent adhesive complete all specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all specified and directed

All as per item No 76 above but 75mm bore

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all specified and directed

S&F PVC (SWR) vent cowl of 75mm dia

S&F 75 mm bore PVC (SWR) floor trap,plain with grating including jointing to waste pipe, complete all as specified and directed.

S&F 600mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified and directed.

S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S&F cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete.

S&F chromium plated health foucet with 15 mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed.

S&F chromium plated toilet paper holder with flap complete.

S&F fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified & directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

Supply and installed water cooler, Electric driven,(single phase 230 volts) having approx storage capacity of 40 Litres and nominal cooling capacity of 40 Litres per hour complete all as specified.

Supply and installation of voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 Volts with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Steel body type complete all as specified and directed.

Supply, fixing & laying only GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size :-

50 mm bore GI pipe

25 mm bore GI pipe

20 mm bore GI pipe

S & F Valve, stop, screwed,15 mm with iron wheel head, screwed both ends for iron pipe and fixeding for following size:-

50 mm bore

25 mm bore

20 mm bore

M & L for tapping/cutting from DI pipe 150 mm dia including suitable size ferrule for 50 mm dia GI pipe complete all as specified and as directed.

Supply, laying & testing XLPE insulated, armoured,heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete following sizes nominal cross section size 70 Sqmm x 3.5 core complete all as specified and directed

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables & foundation of poles, stay assembly and getting out in any type of soil complete all as specified and directed.

M&L dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation of thickness of sand 18cm all as specified and directed. Note: Punned down thickness of sand shall be measured for payment purposes.

M&L for old size sub class 'B' bricks, laid in trenches as cable covers/protection complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specifed and directed.

M&L for concrete bed drain pipes for 150 mm internal dia Reinforced concrete pipes ,class NP-2 in PCC 1:3:6 type C-2 using 40 mm graded stone aggregate including packing under,and haunching against sides of pipes after they are laid and tested complete all as specifed and directed.

M&L for 150 mm internal dia Reinforced concrete pipes ,class NP-2 pipes laid in trenches and jointed complete all as specifed and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6.0 mtr mean radius built in CM 1:4 complete all as specifed and directed.

M&L for providing PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching,coping and like including weathering,slightly rounded or chamfered as required complete all as specifed and directed.

M&L for rendering 15mm thick in CM 1:4 on brick wall or concrete surfaces including finshing the surfaces fair and even complete all as specifed and directed.

M&L for providing pre-cast RCC cover slab of type B-1 using 20mm graded stone aggregate as in manhole cover /drain cover etc with plain faces and set in CM 1:6 complete all as specifed and directed.

M&L for mild steel TMT bar 8 mm dia ,cut to length bent to shape as required and binding with and including mild steel wire( anealed) not less than 0.90 mm dia complete all as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm thick mm internal dia pipes

M&L for Machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate),as in coping complete all as specified and directed

M&L for Antitermite treatment of soil under existing floors using emulsion @ one litre per hole ,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand )to match the existing floors.

M & L average thickness 25mm for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), as in padding / levelling course for maintain to proper slope of roof including necessary form work as required complete all as specified and directed.

S&F for chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

S&F chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed

M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr -in charge.

M&L For Chequred cement concrete tiles (pre painted coloured rubber moulded ) 20cmX20cmX20-22mm thick set jointed and pointed with grey cement slurry mixed with pigment to match the shade over and inclusive of 20mm thick screed bed of CM(1:6) complete all as specified and directed.

Material & labour for point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100 volt grade single core having multistandard copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only , on ceiling PVC conduit on surface will be used ) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches , sockets , fan regulator etc for one fan /light point controlled by one switch for following complete all as specified and directed.

All as per item No 118 above and for One light point/fan point/ bell point controlled by one switch.

All as per item No 118 above but one 5 amp socket out let point controlled by one switch on same board with other switches.

All as per item No 118 above but one 5 amp socket out let point on indepandent board controlled by one switch .

All as per item No 118 above but wiring with 2.5 sqmm single core copper conductor for one socket outlet 15/16 amps point on the indepandent board .

S & F for switch piano flush button single pole one way 5 amp ,240 volt complete all as specified and directed.

S&F socket outlet flush type 5 amp , 5 pin 240 volt complete all as specified and directed.

S & F for Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed.

S & F for socket outlet 2 in 1, 6 pin, 5 and 15 amp, 230 Volts complete all as specified and directed.

Supply and fix Ceiling rose surface bakelite 63.5mm dia three terminal, fixied in repairs complete all specified and directed.

Supply and fixing batten / angular fittings complete all as specified and directed.

Supply and fixing of 9 watt LED bulb complete all as specified and directed.

Supply & fixing for electronic Fan regulator 450 watt.

Supply and fixing double door SPN DB's eight way of powder coated DB's suitable for MCB's fitted with bus bar , neutral link , earth bar and Din ral as per existing finishing complete all as specified and directed.

S & F in repair with MCB SPN 5 to 40 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F in repair with MCB SP 240 volts 5 to 40 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply and fixing LED tube light batten box type fitting with decorative end caps including one single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall /ceiling fittings accessories and connecting with all accessories internally prewired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified and directed.

Supply and fixing LED tube rod 18 watt 230 volt T 8 type made up of polycarbonate with inbuilt electronic driver both sided connection with metal heat sink complete fixed with wall/ceiling incl fitting accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed.

Supply and fixing ceiling fans 1200 mm sweep , BEE 5 star rated ,ceiling fan with brush less direct current (BLDC) motor,class of insulation :B,3 Nos blades,30 cm long down rod ,2 nos ,canopies ,Shackle kit safety rope,copper winding,power factor not less than 0.9,Service value (CMM/W) minimum 6.00,Air delivery minimum 210 CMM 350 RPM(tolerance as per IS :374-2019),THD less than 10 % ,with remote for speed control and all remaining accessories including safety pins,nut bolts washers,temperature rise=75 degree C (max),insulation resistance more than 2 mega ohm,suitable for 230 V,50 Hz single phase ACsupply ,earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sq mm PVC insulated round flexible cable and including writing MES No all as specified and directed.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit including PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all specified and directed.

S&F in repair of Earthing to panel with galvanised steel earth plate electrode 600mm X 600 mm X6mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 of MES Shedule pt 2009 GI earth lead strip protected by GI pipe 40mm dia light grade and connected and connected to earth test point including excavation in any type of soil , returning filling , disposal of soil , providing charcoal dust and common salt upto top edge of earth plate , construction of PCC pit with RCC cover , funnel ,watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all specified and directed.

Supply, laying, jointing and testing XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor for 25 sqmm 2 core complete all as specified and directed.

Please Enable Macros to View BoQ information