Providing cement concrete road with drainage facilities to the Thennansalai Nagar (3rd main road) at periyapet in Thirubuvanai Constituency, Puducherry.

Amount

Code no 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming ofbottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil

Code No 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 gradedstone aggregate 40mm nominal size)

Code No 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:3:6 (1 cement:3coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No4.3.2 Centering shuttering including struttings, propping etc. and removal of form work for Retaining walls , return walls, walls (any thickness) including attached pilasters, buttresses plinth and string courses fillets etc.- Using steel sheet with M.S.frames

Code no 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No 13.8.3 12 mm cement plaster of mix - 1:5 (1 cement : 5 fine sand)

Code No 2.27A.1 Supplying and filling with gravel (excluding rock ) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering etc.complete including all lead and lift

Code No 4.1B.3 Construction of granular sub-base by providing close graded meterial, spreading in uniform layer with motor grader on prepared surface, by mixing place methodwith rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specification, 4th Revision -By mix in place method -For grading III material

Code No 4.92.C Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth 3 wheeld steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum or gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-II with moorum or gravel screening. (As per MoRTH specification, 4th Revision)

Code No 6.1.Mo Cleaning the existing W.B.M. road surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. As per clause no 502.4.2 and 503.3.1 of MOST specification.

Code No 6.5F.1Mo Providing and applying tack coat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on granular base such as WBM and WMM surfaces not bitumen primed. Rate of application 10kg/10sqm.

Code No 6.11B.Mo Providing and laying open graded premix carpet 20mm thick on prepared surface in a single course as wearing course composed of specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6 to 10 tonne laying manually and rolling with power roller 8 to 10 tonne but excluding cost of primer/tack coat. As per clause no 509 of MOST specification.

Code No 6.17Mo Providing and applying premixed seal coat type `B' comprising of thin application of fine aggregate premix with bitumen binder in mini hot mix plant, carriage manually of mixed material and laying and rolling with power roller 8 to 10 tonne. As per clause no 513 of MOST specification.

J RAJENDIRAN