SPECIAL REPAIR TO CERTAIN ROAD AT BABINA CANTT UNDER GE BABINA

Amount

Scarifying or picking graveled macadam or bituminous macadam surface in area exceeding 400 Sqm & depth not exceeding 100 mm deep and removing rubbish from site not exceeding 50 mtr and stacking complete all as specified and directed.

M & L for surface dressing not exceeding 30 CM deep (average 15 CM), site clearance, to remove the bushes / exra surplsu soil from iste and making area workable complete all as specified and as directed.

M&L moorum/red bajri for berms including spreading, levelling, watering and rolled with power roller of 5 to 8 tonne capacity to required camber and gradient complete all as specified and directed.

M&L Soling 150mm (or sub base) spread thick with broken boulders or quarried stone, interstices filled, surface formed and rolling and consolidating formation surfaces in using exceeding 8 to 12 tonn power road roller as required gradient and chamber complete all as specified & directed.

M&L Soling 75mm (or sub base) spread thick with broken boulders or quarried stone, interstices filled, surface formed and rolling and consolidating formation surfaces in using exceeding 8 to 12 tonn power road roller as required gradient and chamber complete all as specified & directed.

M&L for 7.5 CM thick (compacted thickness) WBM with coarse aggregate of granite trap or basalt grading-2 (63 to 40mm) or of grading-3 (50 to 20mm) spread, rolled and consolidated to required gradient material and camber required with 8 to 12 tonn power road roller complete all as specified & directed.

M&L for 7.5 CM thick (compacted thickness) (Except material) WBM with coarse aggregate of granite trap or basalt grading-2 (63 to 40mm) or of grading-3 (50 to 20mm) spread, rolled and consolidated to required gradient material and camber required with 8 to 12 tonn power road roller complete all as specified & directed.

M&L for preparing unsurfaced WBM by brushing caked mud etc by sweeping with brooms and finally faning with wire brushes for removing & cleaned the surface with gunny bags to remove all loose dirt & applying evenly tack coat of bitumnous primer @ 10 Kg per ten Sqm using paving bitumen VG-10 complete all as specified and directed.

Repairs to pot holes any depth exceeding 30mm depth, area not exc 1 Sqm each including sweeping free from dust & mud or water scoring sunken surfaces in roads paths etc, cutting around edges to at least 25mm in depth making good by applying tack coat with paving bitumen @ 5Kg per ten Sqm putting in pre-mixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per ten Sqm, blinded with 0.09 Cum of stone chipping of 6.3 mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes exe 30 mm complete all as specified and directed.

Providing & laying of hot applied 2mm thick, thermoplastic compound for center or edge line, marking (reflective type) including reflecto-rising glass beads @ 250gm per Sqm area, as per IRC-35, of white/yellow colour (approved colour) and shade for road marking on bituminous/concrete road surface as per demarcation and as directed.

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 65mm) of high effciency mono rystafie solar panel 2.4V/0.3 watt one NI-ed re-chargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions complete all as specified and directed.

S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed.

M&L for stone edging/kerb (sand stone) of roughly rectangular stones of size 15 CM x 30 CM, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm thick jointed in cement mortar 1:6 and struck flush with including taking out old stone patti slab or bricks any type & removing from site complete all as specified and directed. .

M&L for premix bituminous macadam laid / rolled and compacted to required gradient and camber and (consolidated thickness 40-75mm) using 4% paving bitumen by means of mechanical paver by weight or total mix complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt & applying evenly tack coat of bitumnous primer @ 5 Kg per ten Sqm using paving bitumen VG-10 complete all as specified and directed.

M&L for providing bituminious premix asphaltic semi dense concrete (30mm thick) consolidated thickness with 5.5% binder content by wight of total mix, with using paving bitumen VG-30 laid/spread uniformly by means of mechanical pavers over primed surfaces rolled and compacted to required camber and gradient complete with 8 to 12 tonne power road roller complete all as specified and directed.

Demolition of cement concrete (unreinforced) in Ground floor and pavings not exceeding 15 CM thickness (belove or above ground level) & removing the rubbish from site complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed atone aggregate) as in sub base of Path all as specified and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete interlocking tiles or paver block of M-35 grade concrete with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc, of made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick (average) compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L Providing and laying 80mm thick factory made chamfered edge cement concrete interlocking tiles or paver block of M-35 grade concrete with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc, of made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick (average) compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (20mm graded aggts) as in coping, benching etc of Path inclding form work if required complete all as specified and directed.

S&F in repair poly-carbonate convex mirror 5 m thickness (80CM dia) make-3M or equivalent in AUTOMAT/ACE/DARK EYE/ISI marked, poly-carbonate body mounted on 16 gauge MS pipe of 75mm outer dia fixed 1.5 RM above ground surface and 600mm below ground including fixed in PCC foundation of size 30x30x60cm with PCC 1:3:6 type C-1 bottom part of MS pipe welded with 5mm thick 125mmx125mm MS pipe for anchorage in PCC, MS pipe shal be painted stove enamelled black paint over oe coat of red oxide primer, including necessary eathwork excavation in any type of soil, removed and disposal of surplus soil complete all as specified and directed. Note - Convex mirror shall be as per sample)

M/S Ritu Tandon (BID ID -3363555)

M/S S K AGARWAL (BID ID -3363391)

ROHIT ENTERPRISES (BID ID -3363478)

ASHISH SHARMA (BID ID -3355223)