Hiring of Tipper Trucks, Backhoe Loader, Tractor Trolley for Desilting /Removal of silt from Drain on Karawal Nagar road from Sadatpur Gali no.6 to Muhkiya market chowk LHS in ward no. 248 Shah (N) Zone. SH1- 60 percentage of Desilting of drain in 1s

Amount

Hiring of Back hoe loader wheel mounted of having a loading bucket of 1 cum capacity and excavating capacity of 0.24 cum including driver, fuel, lubricant etc. for 8 hrs working in a day and including all assemblies required for demolition/excavation. Back hoe loader under foul conditions

Engaging tractor and trolley fitted with Jack system with driver and including T&P, fuel, lubricant for lifting /collecting of MSW /Garbage /Malba /Drain silt etc. upto full load capacity and dumping of the same in the nearby designated site /SLF minimum travelling distance 40 km per day for 8 hour working. Capacity of trolley should not be less than 4 tonne. Tractor and trolley under foul conditions

Hiring of Tipper truck with auto lifting facility including driver, helper, T&P, fuel, lubricant etc. for lifting /collecting of MSW /Garbage/Malba /Drain silt etc . upto full loading capacity and dumping of the same at designated site /SLF for minimum travelling distance 100 km per day for 8 hour working .The make of vehicle should not be older than 6 years. Equivalent to TATA 2518 HYVA under foul conditions

Hiring of Tipper Truck with auto lifting facility including driver, helper, T&P, fuel, lubricant etc. for lifting /collection of MSW /Garbage /Malba /Drain silt etc. upto full loading capacity and dumping of the same at designated site /SLF for minimum travelling distance 100 km per day for 8 hour working .The make of vehicle should not be older than 6 years. HMV of capacity of GVW 16260 kg (+/-5%). Tata 1613 or equivalent under foul conditions

Providing and placing in position 100mm thick factory made machine batched & ma chine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes,of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge .