Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹4.0 L+₹12,329.94 (3.21%)Accepted-Finance LOCATION HIMACHAL PRADESH HP | SIRMAUR | HIMACHAL PRADESH | 171226 | L2 | Accepted-Finance L2 | |
| 3 | L3₹4.2 L+₹40,200.42 (10.5%)Accepted-Finance C O MADAN MOHAN BUILDING TOTU SHIMLA 11 TEH DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L3 | Accepted-Finance L3 | |
| 4 | L4₹4.8 L+₹97,031.46 (25.3%)Accepted-Finance VILL MASTOL PO KALOTI TEHSIL CHIRGOAN DISTT SHIMLA 171207 HP | SHIMLA | HIMACHAL PRADESH | 171207 | L4 | Accepted-Finance L4 |
| Sl No | Description | Qty | Unit | shashikant L3 | Prateek Sonkhla L1 | abhishek guleria L2 | PREM KRISHAN L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Structural Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. Complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, grills, railings, brackets, gates and similar works. | 3,545.96 | Kilogram | 105 ₹3,72,325.8 | 92 ₹3,26,228.32 Lowest | 98 ₹3,47,504.08 | 120 ₹4,25,515.2 |
| 2.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel rade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Tata/ Jindal Make) | 10 | Square metre | 950 ₹9,500 | 900 ₹9,000 | 900 ₹9,000 | 800 ₹8,000 Lowest |
| 3.00 | White washing with lime to give an even shade etc complete in all respect as per satisfaction of Engineer-in-Charge. a). old work (two or more coats) | 32 | Square metre | 15 ₹480 Lowest | 50 ₹1,600 | 20 ₹640 | 50 ₹1,600 |
| 4.00 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Two or more coats on new work. | 72.45 | Square metre | 100 ₹7,245 | 80 ₹5,796 | 80 ₹5,796 | 70 ₹5,071.5 Lowest |
| 5.00 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge a) One or more coats on old work | 157.47 | Square metre | 70 ₹11,022.9 | 78 ₹12,282.66 | 62 ₹9,763.14 Lowest | 70 ₹11,022.9 |
| 6.00 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade etc. all complete as specified and as directed by the Engineer-in-Charge. a).One or more coats on old work | 364.42 | Square metre | 65 ₹23,687.3 Lowest | 80 ₹29,153.6 | 65 ₹23,687.3 Lowest | 82 ₹29,882.44 |
Tender Value
₹4.2 L
EMD Value
₹8,500
Closing Date
5 Nov 2026, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (Const.)
Estate Organization, Dr YSP UHF, Nauni
Providing painting in mess of Gayatri Hostel and covering of balcony in Kedar Hostel at Dr YSP University of Horticulture and Forestry, Nauni, Solan
2026_YSPU_146277_1
UHF/Const.1/Part/2026/-1605.3 Dated 21-10-2026
Open Tender
Civil Works
Item Rate
120 days
Nauni
Please refer to tender document
5 documents required · 5 mandatory
₹700
Executive Engineer (Design)
₹8,500
5 Nov 2026
21 Oct 2026
5 Nov 2026
21 Oct 2026
5 Nov 2026
21 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Structural Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. Complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, grills, railings, brackets, gates and similar works. | 3,545.96 | Kilogram | 107.45 | ₹3,81,013.4 |
| 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel rade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Tata/ Jindal Make) | 10 | Square metre | 592.45 | ₹5,924.5 |
| 3 | White washing with lime to give an even shade etc complete in all respect as per satisfaction of Engineer-in-Charge. a). old work (two or more coats) | 32 | Square metre | 10.5 | ₹336 |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Two or more coats on new work. | 72.45 | Square metre | 82.4 | ₹5,969.88 |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge a) One or more coats on old work | 157.47 | Square metre | 53.85 | ₹8,479.76 |
| 6 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade etc. all complete as specified and as directed by the Engineer-in-Charge. a).One or more coats on old work | 364.42 | Square metre | 58.55 | ₹21,336.79 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.64 MB
tendu.pdf
Tender Documents • 5.21 MB
BOQ_218071.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .