SPECIAL REPAIR TO BLDG NO. P- 377 AT AF STN HASIMARA UNDER GE (AF) HASIMARA

Amount

Note 1: (Applicable for all parts/items) : The bidders/ contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. B/R WORKS

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over area n. exc 1.5m in depth for foundation etc or for shafts, wells, etc & getting out in soft/loose soil complete all as specified and directed.

Excavating over area exc 1.5m but n.exc 3.0m in depth for foundation etc or for shafts, wells, etc & getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Filing under floors with earth obtained from excavation here-in-before and spreading, levelling in layers n.exc 25 cm thick well rammed and watered as required complete all as specified and directed.

Removing of excavated surplus soil not exceeding 50m and depositing where as directed at a level not exceeding 1.5m above the staring point complete all as specified and directed.

M&L for Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Hardcore of broken stone, gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 40 mm thick cement Concrete 1:2:4 type B0 (uaing 12.5 mm graded stone aggregates) as in Damp proof course to horizontal or vertical surface incl necessary form work mixed with and incl water proofing compound as per manufactures instruction complete all as soecified. Note : WPC shall be measured and paid separately under respective item).

M&L for Bick work with subclass 'B' bricks straight or curved in plan exc 6 m mean radius built in cement mortar 1:6 with using old size bricks complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick wall including provision of 02 Nos 8mm TMT bars at every fourth course complete all as specified and as directed.

M&L for RCC (Design Mix) M-25 (using 20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregate) as in chajjas complete all as specified and directed. Note for item Nos1.013 to 1.017:- Reinforcement and formwork will be measured and paid seperately under relevent items.

M&L for mild steel TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bar 6mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per items No 1.019 here-in-before, but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.flat rough finished surfaces concrete flat complete all as specified and directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete, square, rectangular or polygonal complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges flat rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surfaces of concrete complete all as specified and directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement of top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately against respective item.

M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, rendering finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as in RCC columns finished even and smooth complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M&L for 75 mm thick, PCC type D2, 1:4:8 (using 40 mm graded crushed stone aggregates) as in sub base of floor complete all as specified and directed.

M&L for 25 mm thick, PCC type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer 20mm thick in cement mortar 1:4 for laying of floor tiles complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for applying 3mm thick wall care putty on walls to obtain a smooth surface including making good any undulations on the surfaces complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

S&F of mild steel framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, frammed balusters, walk ways, railings, frame work of water tanks and similar works conforming to FE-290, Gde-E-165 all as specified and directed.

M&L for preparation of new steel or Iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1( using 20mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Prepration of new surface of roof with neat cement slurry @ 3 Kgs per sqm complete all as specified and directed. in order of precedence as stated :- (a) M & L 15 mm thick plastering in cement mortar 1:3 on brick or concrete surface mixed with WPC by weight of cement as per manufacturer instruction finished even and smooth without using extra cement (WPC measured and paid separately) complete all as specified and directed. (b) M & L applying bitumen primer@ 1.2kg /Sqm confirming to IS 3384-1986 the plastered surface including cleaning surface complete all as specified and directed. (Note :- Bituminous primer shall be `TANK MASTIC’ manufactured by M/s STP Ltd or “EMUFALTE” manufactured by M/s Texsa India Ltd or equivalent approved makes). (c ) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.60 Kgs per Sqm reinforced with non-woven polyester febric weight not less than 150gms per Sqm. Polymeric membrane shall be taken to a height of 30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note :- (i) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. iii) APP based polymeric membrane shall be “SUPER THERMOLAY” manufactured by M/s STP Ltd or “ MOPLY FP 3mm” manufactured by M/s Texsa India Ltd or equivalent approved product. iv) Applying one coat of aluminium paint @ 0.11kg/Sqm over app membrane surface.

Demolition of cement concrete (un-reinforced) of any description and in any position complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling structural steel work including doors, gates, but excluding framed truss etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches,pillars etc complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed.

Takiing down chowkat with shutter without taking off shutter from the frame n.exc 1.5 Sqm each complete all as specified and directed.

Taking down cement plaster on Brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

S & F of factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed

S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F of Aluminium handles, cast type, anodised of 100 mm size complete all as specified and directed.

S&F of 200 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed.

S&F 75 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

M& L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe 410W Gde E-1250 quality A complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing rubbish off the premises all as per specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15 mm thick screed bed in cement mortar(1:6) all as per specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces of size350x250x7mm/450x350x7mm thick as in skirting or dado on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick cement plaster as in backing of tiles in cement mortar (1:4) complete all as specified and directed.

S&F of Powder coated anodised Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

S & F of 5.5 mm thick, tinted glass and glazing with neoprine rubber beading for aluminium door/ windows exc 0.5sqm in each pane complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over Complete removal of existing treatment of old surface of wall complete all as specified and directed.

M & L for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash to walls including cornices complete all as specified and directed.

M & L for preparing old decorated surface of ceiling by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for applying one coat of oil bound distemper to old decorated surfaces of wall including preparation of surfaces complete all as specified and directed.

S & F of Sheet Glass Shelf Assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Taking down 20 mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. (Note :- The rate includes all plain CPVC fittings mean fittings which do not have any metal component ( Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc) and pipe cutting fixing with CPVC solvent cement and testing.The seprate rate for special fittings [CPVC Brass fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc), Unions, Ball valves, Flange and tank adaptor].

S&F CPVC 20 mm dia of Brass Elbow complete all as specified and directed.

S&F CPVC 20 mm dia Brass Elbow (3/4 X ½) complete all as specified and directed.

S&F CPVC 20 mm dia Brass Tee complete all as specified and directed.

S&F of CPVC 20 mm dia Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.

S&F of CPVC 20 mm dia Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

S&F of CPVC 20 mm dia Tank Adaptor complete all as specified and directed.

S&F CPVC 20 mm dia UNION complete all as specified and directed.

S&F of CPVC 20 mm dia BALL VALVE complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth of brick wall complete all as specified and directed.

S&F of vitreous china WHB white flat black size 580 x 450mm excluding pillar tap, but including 32mm dia waste pipe with CP waste coupling bracket etc in repair complete all as specified and directed.

Fixing only in repairs wash basins Vitreous China (flat back or angle back type) any size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs vitreous china EWC (padestal pattern) white 'P' or 'S' trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and as directed.

M&L for PVC connection 15 mm size with PTMT Nuts of length 450 mm complete all as specified and directed.

S&F of PVC waste pipe for urinal/ WHB 32 mm/ 40 mm bore with one end with socket complete all as specified and directed.

S&F of Central Hole basin Mixer 15mm bore chromium plated in repair complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle complete all as specified and directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed.

S&F in repair CP angular stop valve chromium plated of 15 mm bore as with CP nipple with socket complete all as specified and directed.

S&F in repair two way angular stop cock 15mm bore chromium plated complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair, CP toilet paper holder, with cover white, box type, white with CP screws complete all as specified and as directed.

Demolition and breaking of internal dia of pipe 100 mm bore / 75 mm bore pipes of Salt glazed ware, AC or Reinforced concrete set in cement mortar complete all as specified and directed.

S & F of 110 mm dia PVC rain water pipes,single sockets, in any length with sealant rubber ring joints fixed to wall incl necessary MS flat iron clamps of size (40x4mm) all as specified and as directed.

S & F of 75mm dia, PVC rain water pipes, single socketed,in any length with sealant rubber ring joints fixed to wall incl necessary MS Flat iron clamps of size (40x4mm) all as specified and as directed.

S&F in repair of 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repair PVC (SWR) junction, single, (single T) equal or unequal 110mm bore complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR) bends provided with access door of any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) junction, single, (single T) equal or unequal complete all as specified and directed.

M &L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solven cement as in repairs complete all as specified and directed.

M&L for High dencity polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to wall,ceiling or floors etc.40 mm bore pipe as in repairs complete all as specified and directed.

S&F of CP grating 100mm dia with or without waste hole, fixed to floor trap in repair complete all as specified and directed.

S&F of rubberised dood cill width exc 30mm but n.exc 50mm complete all as specified and directed.

E/M WORKS

Taking down carefully copper/ aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20 mm dia with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLS unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully for One light point / one fan point controlled by one, one way swtich complete all as specified and directed Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)

All as per item No 2.02 above but for 5 Amp switch socket on the same board.

All as per item No 2.02 above but for 5 Amp switch socket on independent board.

All as per item No 2.02 above but size of cable 4.0 sq mm with earth wire of 4.0 sq mm complete.

All as per item No 2.02 above but for 2 way point wiring with cable of size1.5 sq mm with 1.5 sq mm earth wire suitable for light points at stair case complete ( Staircase lights).

All as per ser item No. 2.02 here in before but one bell/buzzer point controlled by one push button on the independent board with other switches.

Supply and fixing Switch modular type, single pole, one way, 5/6 Amp, one module, complete all as specified and directed. Make-Legrand cat No-675501 or equivalent model of Havells/ anchor wood.

Supply and fixing Switch modular type, single pole, one way and 15/16 Amps, one module complete all as specified and directed.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type completes all as specified and directed.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type completes all as specified and directed.

Supply and fixing Switch modular type, single pole, Bell push, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing Switch modular type, single pole, 2 way 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing in replacement of bell ding dong type AC, 230 volts, single phase complete all as specified and directed.

Taking down ceiling fans , any type and depositing AGE E/M STORE complete all as specified and directed.

Re-fixing only ceiling fans complete with blades, complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades, frame and louvers complete all as specified and directed.

Supply and fixing Fan Step Regulator modular type, two module, completes all as specified and directed.

Supply and fixing in replacment of ceiling rose of size 65 x 50 mm surface bakelite 240 Volts three terminal as specified and directed.

Supply and fixing in replacement angle type Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix LED Lamp 9 Watt complete all as specified and directed

Supply and fixing of LED lights fitting 1x 10 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length complete all as specified and directed.

Supply & fix LED tube 20W tube light fitting inverter LED Batten with square profile and polycarbonate channel alaithium light along with fixture, 20 W complete all as specified and directed.

Taking down geyser any type and re-fixing complete all as specified and directed.

Supply and fix MCB DB TPN 4 way IP 43 protection ,double door, concealed on wall complete all as specified and directed .

Supply and fix MCB DB SPN double door 08 way, IP 43 protection concealed on wall complete all as specified and directed.

Supply and fix MCB DB SPN double door 04 way , IP 43 protection concealed on wall complete all as specified and directed.

S & F MCB SPN 6 tp 32 Amp complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection, testing and commissioning complete all as specified and directed.

Supply and fix MCB 63 Amp 4 Pole, 10 KA complete all as specified and as directed.

Supply and fix power unit 32 Amps including socket 25 AMP ,06 module metal box for mounting of power unit complete as specified and directed. Make : Legrand Cat Part No.6755 58 for Power unit , 6772 32 for socket 25 Amp and 6890 10 for metal box 6 Module or equivalent model of Havells/ ABB/ L&T.

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables+ one run of conduit will be measured as one unit. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 4 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables + one run of conduit will be measured as one unit. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00 mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

M & L for taking down and re-fixing single phase electric energy meter any type and depositing to MES store yard complete all as specified and directed.

M/S I P GROUP

M/S MANODEEP CONSTRUCTION