Furnishing, Wooden flooring, false ceiling and wooden framing etc. at F Type Quarters near North Gate of Fort Area, Moti Daman.

Items :

Providing material and labour for pine wood frame for rising of floor height with size 3"x11/2" and frame of 60x60 CM including fixing 12mm plysheet including cutting in proper length, finishing, connect fixed with neils, cleaning etc. complete as directed by engineer- in-charge.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal nductivity0.043° w/m KC.for the best thermal nsulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone /Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections from 19mm plysheet sheets IS 710 marine ply and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size as per requirement with flanges at equal centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of strips of plysheets as well 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with 12mm thick plyshhets at bottom surface shall be fixed in a direction , including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to ceiling/wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the sheets with recommended jointing compound , jointing tapes , finishing with jointing compound in layers covering on both sides of joint and all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,including covered bottom surface with 1mm thick laminate etc. complete as per drawings, specification and direction of the Engineer in Charge

Providing material and labour for removing/scrapping old laminate sheet from the existing furniture and preparing smooth surface for fixing new laminate sheet on exposed surface with good quality adhesive including cleaning etc. complete as directed by the engineer-in-charge.

Providing material and labour for preparing smooth surface in new work for fixing laminate sheet on exposed surface with good quality adhesive including cleaning on existing furniture etc. complete as directed by the engineer-in-charge.

Providing Material and labour for fixing 6 mm thick HDF sheet on existing shutter including fixing 1mm thick laminate sheet on with teal wood patti around border using SS hinges 3 x 125mm, approved quality of brass handle, aldrops 8", melamine polish on expose surface of teak wood patti and oil paint on inner surface of shutter etc. complate as direcetd by engineer-in-charge.

Providing material and labour for fixing HDF 8mm thick board for skirting of 75mm width including cutting finishing, cleaning etc.complte as directed by engneer incharge

Providing material and labour for fixing HDF 8mm thick sheet for flooring with fixing kini foam 4mm thick for base including cutting finishing, cleaning etc.complte as directed by engneer incharge

Providing material and labour for fixing frame with 12 mm water proof ply and cover exposed surface with pasting 1 mm laminate using good adhesive for window and fixing single 12 mm thick Toughened glass (Modi guarg or Saint Gobain)that has undergone processes of controlled thermal treatment in powder coated aluminium ditachable frame including transporatation, loading- unloading of material at site, cleaning etc. complete by engneer in charge.

Providing material and labour for fixing of 12mm marine plysheet of IS 710 Boiled water proof, anti -termite for palmet , wall panelling for TV and cover the beams in "C" shap belt with pasting 1mm thick laminate sheet on exposed surface with good quality adhesive etc. complete as directed by engineer-in-charge.

Providing material and labour for fixing curtains in roman blind and american plate luminium chennel with screwed. Curtain of approved color cotton cloth including liner etc. complte as directed by engneer in charge.

Polishing with french polish on previously polished wood and wood based surface to give an even surface including cleaning, the surface of all dirt, dust and sand papered smooth and including a coat of wood fille

Supply and fixing woolen decorative Carpet size as per approved design including transporatation, loading- unloading etc. complete as directed by engineer-in-charge.

SHIV CONSTRUCTION