CNT/WSS/ICB/JICA/DESAL/ CP2/022/2023-24Construction, Testing and Commissioning of Reservoir at Porur and Pumping Stations, Ancillary works at Perur and Porur including Operation and Maintenance (O andM) for Twenty (20) Years.

Amount

SCHEDULE2:A.CONSTRUCTION OF PUMPING STATION AT PERUR (400 MLD) – CIVIL WORKS

EARTH WORKS

All kinds of soil

Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stony earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0metc. complete.

IN INR

IN USD

IN JPY

Extra for every additional one-meter lift or part thereof over initial liftetc. complete.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Driving sheet piles for one meter length of gallery each side in sandy soil.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Removing sheet piles from one meter length of gallery on each side including stacking the sheet piles properly.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Refilling with excavated soil (other than sand) complying with standard specifications for filling in foundations and basement.

IN INR

IN USD

IN JPY

Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.

IN INR

IN USD

IN JPY

CONCRETE AND ALLIED WORKS

Cement concrete 1:2:4 (M15) using Crushed stone sand (M sand) and 12 to 20 mm gauge hard broken stone jelly for plain concrete work including laying, compacting, curing, etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

1.5 – 4.5 m depth

IN INR

IN USD

IN JPY

4.5 - 9.0 m depth

IN INR

IN USD

IN JPY

Above GL

0 - 1.5 m height

IN INR

IN USD

IN JPY

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade for reinforced cement concrete using SRC/OPC (43 grade) for structural elements under controlled water cement ratio with plasticizer using 20mm and downgraded machine broken granite stone jelly excluding the cost of Centering and shuttering and reinforcement, but including curing, fixing, fan clamps, as per standard specification etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

1.5 – 4.5 m depth

IN INR

IN USD

IN JPY

4.5 - 9.0 m depth

IN INR

IN USD

IN JPY

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

4.5 - 9.0 m height

IN INR

IN USD

IN JPY

FORM WORK

Providing form work with Centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting for raft, wall, beam, slab, column & stair, etc. complete.

Above GL

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

PILING WORK

Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M30 using SRC/OPC (43 grade) of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).

600 mm dia. Piles

IN INR

IN USD

IN JPY

450 mm dia. piles

IN INR

IN USD

IN JPY

Pile Load Test

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile above 50 ton and up to 100 ton Safe capacity.

Initial test (Test Load 2.5 times the Safe capacity) by Maintained load method on test pile.

IN INR

IN USD

IN JPY

Routine test (Test Load 1.5 times the Safe capacity) by Maintained load method on test pile.

IN INR

IN USD

IN JPY

Lateral load testing of single pile in accordance with IS Code of practice IS: 2911 (Part IV) for determining safe allowable lateral load on pile: Above 50 ton and up to 100 ton capacity pile.

Initial test (Test Load 2.5 times the Safe capacity)

IN INR

IN USD

IN JPY

Routine test (Test Load 1.5 times the Safe capacity)

IN INR

IN USD

IN JPY

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerized equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.

IN INR

IN USD

IN JPY

REINFORCEMENT & STRUCTURAL STEEL WORKS

Supplying and fabricating Thermo Mechanically Treated High Corrosion Resistance (CRS) bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008, including fixing with binding wires, assembling, and laying in position for all RCC works as follows.

8 mm dia. rod (Fe-500 D Grade with CRS material)

IN INR

IN USD

IN JPY

10 mm – 32 mm dia. rod (Fe-500D grade with CRS material)

IN INR

IN USD

IN JPY

Structural steel work in single section/built up section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying two coats of approved primer and two coats of approved epoxy paint all complete.

IN INR

IN USD

IN JPY

FINISHING WORKS

Masonry works

Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M sand)) for over 23cm thick wall including curing etc. complete.

0 - 4.5 m height

IN INR

IN USD

IN JPY

4.5 - 9.0 m height

IN INR

IN USD

IN JPY

Extra labour for 11cm thick wall

IN INR

IN USD

IN JPY

Plastering work

Plastering (Internal) with cement mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Plastering (External) with cement mortar 1:4 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Special ceiling plastering for RCC slabs, and beams in CM 1:3 using Crushed stone sand (M-sand) – 10mm thick including hacking and curing, etc., complete.

IN INR

IN USD

IN JPY

Flooring works

Flooring with 100mm thick base cement concrete 1:4:10 using 40mm gauge, hard broken stone jelly including laying, ramming, curing, etc., complete.

IN INR

IN USD

IN JPY

Flooring with Macrona Marble slabs, of size 1200 x 1800 x 20mm free from all defects in all floors over a base layer of CM 1:3, 20mm thick. The marble slab shall be laid over the cement mortar by applying white cement slurry in between base mortar and marble slab. The marble slabs are to be laid that there shall be in line with another joint and uniform by using marble cutting machine without any damage to the sides of corners of the marble slab. The entire area at the marble flooring so laid shall be pointed with white cement neatly including polishing with polishing stone of grade 80 for rough grade, 200 for medium, and grade 360 for nice using necessary oxalic acid etc. so as to glassy and smooth and including hire charges for polishing machine and power consumption charges etc. The Macrona marble slabs, polishing stones, oxalic acid, tin oxide etc., proposed for the work shall be shown to the Engineer and got approved by them before use in the work etc., complete.

IN INR

IN USD

IN JPY

Supplying and fixing in position Cement based hydraulically pressed Anti-Skid tiles (pattern design) 20 mm thick in cement mortar 1:3, 20 mm thick & pointed with same colour of cement etc., complete.

IN INR

IN USD

IN JPY

Granolithic flooring 50 mm thick with cement concrete 1:2:4 mix using 3-10 mm chips and top surface rendered smooth with cement including thread lining and 25 mm dia. G.I. pipe of necessary length for water outlet curing, etc., complete.

IN INR

IN USD

IN JPY

Painting

Painting of white washing of two coats including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

Painting two coats with approved cement paint over one coat of primer over cement plastered wall surface, including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

JOINERY WORKS

uPVC Doors

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking.

Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door up to 2.00 sqm)

IN INR

IN USD

IN JPY

Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm)

IN INR

IN USD

IN JPY

Fire Door

Providing and fixing fire-resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermiculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumescent fire seal strip of size 10x4 mm (minimum) all-round the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge.

IN INR

IN USD

IN JPY

Providing and fixing 50mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermiculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumescent fire seal strip of size 10 x 4 mm (minimum) all-round the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc., consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge.

IN INR

IN USD

IN JPY

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

IN INR

IN USD

IN JPY

uPVC Casement (openable) type window

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 2.50 sqm).

IN INR

IN USD

IN JPY

uPVC Ventilator

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc., profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between the frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension.

IN INR

IN USD

IN JPY

Rolling Shutter

Supplying and erecting rolling shutters of 76mm 18 gauge of galvanized steel sheet with push and pull or self-coiling type operated by pulling hook with top cover including locking arrangements and fixed in position inside or outside, etc., complete and painting with priming coat of red oxide without lock. (Payment will be made by only for the actual opening of the shutters are rolled up wherever the shutters are to be fixed)

IN INR

IN USD

IN JPY

PLUMBING FOR WATER SUPPLY AND SANITARY WORKS

Supplying CPVC pipes and specials of the following sizes including cutting threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brick work and plastering wherever necessary with scaffolding, etc., complete.

20 mm dia.

IN INR

IN USD

IN JPY

Supplying and fixing gate valve of the following sizes

20 mm dia.

IN INR

IN USD

IN JPY

Supplying and fixing C.P. Towel rails 45 cm x 20 mm

IN INR

IN USD

IN JPY

Supplying and fixing C.P. Screw down tap of size 20 mm dia.

IN INR

IN USD

IN JPY

Supplying and fixing C.P. flush cock of size 20 mm

IN INR

IN USD

IN JPY

Supplying and fixing chromium plated brass soap dish

IN INR

IN USD

IN JPY

Providing and fixing 75 mm dia. Nahini trap (floor trap) with brass gratings.

IN INR

IN USD

IN JPY

Supplying and fixing best mirror of size 60 cm x 45 cm of 6mm thick with plywood back including necessary fittings, etc., complete.

IN INR

IN USD

IN JPY

Providing and fixing 15 x 10cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements etc., complete.

IN INR

IN USD

IN JPY

Providing and fixing 110mm dia. PVC pipe with pipe bend for disposal of wastewater from toilet in pumping station.

IN INR

IN USD

IN JPY

Supplying and fixing flat back white glazed tipped or tongued urinals of 46.50 x 35.5 x 26.5 cm with 32 mm dia. lead waste pipe with Bell mouth opening of 75cm long 15mm dia. wheel valve with lead and brass connection, etc. complete.

IN INR

IN USD

IN JPY

Providing and fixing colour glazed European water closet with rose wood seating (Black) low level flushing tank with fittings, etc., complete.

IN INR

IN USD

IN JPY

Supplying and fixing 55cm x 40cm water glazed wash basin with lead and brass connections, C.P. Pillar Tap, and other fittings, etc., complete.

IN INR

IN USD

IN JPY

Construction of inspection chambers of following sizes with earth work excavation for foundation, 23 cm thick concrete bed using 40 mm brick jelly concrete in CM 1:4:10 for foundation, brick work in CM 1:6 for chamber, plastering with CM 1:3, 12 mm thick, benching, channelling, supplying, and fixing 45 x 45 cm FRC heavy duty cover and frame, etc., complete.

IN INR

IN USD

IN JPY

MISCELLANEOUS WORKS

FRP handrail & Chequered plate

Supplying and fixing of pultruded FRP handrail of 1000 mm height with material confirming to IS 6746-1994 and ASTM standards for mechanical properties. The work shall include all the materials, anchor fasteners and accessories required to fix the handrail and all the materials should be got approved by the Engineer before fixing in position as directed.

IN INR

IN USD

IN JPY

Supplying and fixing of pultruded FRP chequered plate of 8 mm thickness of required size with material confirming to IS 6746-1994 and ASTM standards for mechanical properties. The work shall include all the materials and accessories required to fix the chequered plate and all the materials should be got approved by the Engineer before fixing in position as directed.

IN INR

IN USD

IN JPY

Supplying and fixing of pultruded FRP platform and Staircase tread of height 38 mm of required size with material confirming to IS 6746-1994 and ASTM standards for mechanical properties. The work shall include all the materials and accessories required to install, and all the materials should be got approved by the Engineer before fixing in position as directed.

IN INR

IN USD

IN JPY

Steel ladder

Supply and fixing of stainless-steel ladder consisting of side support and footrest at every 200 mm all member of ladder made up of 18 SWG, 304 Grade stainless steel with stainless steel welded joints. The width of ladder is 500 mm.

IN INR

IN USD

IN JPY

Water Proofing

Providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, in all respect etc., complete.

IN INR

IN USD

IN JPY

Concrete with broken brick jelly 20mm gauge in pure slacked lime over R.C.C. roof slab in the proportion of 32:12 ½ (No sand to be used) well beaten with wooden beaters to the required depth of 80mm thick and giving required slope and thickness to roof as required, etc., complete.

IN INR

IN USD

IN JPY

Terrace flooring with two course of flat tiles of 15cmx15cmx12mm using CM 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortar.

IN INR

IN USD

IN JPY

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by engineer incharge and consisting of: (i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement:3 coarse sand) including applying of twice (at base and top of mortar) cement slurry at 2.2 kg/sqm (each time) mixed with water proofing compound confirming to IS:2645 in the recommended proportion over the levelling course. Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportion. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm throughly embedded in the 2nd layer.

Using rough kota stone or equivalent

IN INR

IN USD

IN JPY

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified tone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound confirming to IS:2645 in the recommended proportions with a gap of 20 mm (minimum) between stone slabsand the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement:3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer incharge.

Using rough kota stone or equivalent

IN INR

IN USD

IN JPY

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels/subway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-10 i.e., by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification etc., complete. The product performance shall carry guarantee for 10 years against any leakage.

For vertical surface two coats @ 0.70 kg per sqm

IN INR

IN USD

IN JPY

For horizontal surface one coat @ 1.10 kg per sqm.

IN INR

IN USD

IN JPY

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade.

Two or more coats

IN INR

IN USD

IN JPY

Construction joints of concrete - GI sheets 30 cm wide and 1.6 mm thick.

IN INR

IN USD

IN JPY

Expansion Joint

Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints.

IN INR

IN USD

IN JPY

Providing and fixing in position Stainless steel Grade 304 plate - 1.0 mm thick as per design for expansion joins – 200 mm wide.

IN INR

IN USD

IN JPY

Providing and fixing 160 mm dia. PVC Rainwater downfall pipe from roof to the RWH chamber for collecting the rainwater.

IN INR

IN USD

IN JPY

Providing and fixing of heavy duty FRC cover and frame of size 90 x 90 cm including necessary masonry work and plastering, etc., complete.

IN INR

IN USD

IN JPY

Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS:10910, on 12 mm dia. steel bar conforming to IS:1786, having minimum cross section as 23mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.

IN INR

IN USD

IN JPY

SCHEDULE2:B.CONSTRUCTION OF PUMPING STATION AT PORUR (350 MLD) – CIVIL WORKS

EARTH WORKS

All kinds of soil

Earth work excavation for foundation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stony earth and earth mixed with small size boulders as per SS 20B with initial lead of 10 m and lift of 2.0 m etc. complete.

IN INR

IN USD

IN JPY

Extra for every additional one-meter lift or part thereof over initial lift etc. complete.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Driving sheet piles for one meter length of gallery each side in sandy soil.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Removing sheet piles from one meter length of gallery on each side including stacking the sheet piles properly.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Supplying and filling crushed stone sand (M-sand) for foundations and basement including watering, consolidating, ramming, etc., complete.

IN INR

IN USD

IN JPY

Disposal of surplus earth

IN INR

IN USD

IN JPY

CONCRETE AND ALLIED WORKS

Cement concrete 1:2:4 using crushed stone sand (M-sand) and 12mm to 20mm gauge hard broken stone jelly for plain cement concrete works including laying, ramming, curing, etc., complete.

Below GL

1.5 - 4.5 m depth

IN INR

IN USD

IN JPY

above 4.5 m depth

IN INR

IN USD

IN JPY

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade SRC/OPC (43 grade) for reinforced cement concrete structural elements under controlled water cement ratio with plasticizer using 20mm and downgraded machine broken granite stone jelly excluding the cost of Centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

1.5 - 4.5 m depth

IN INR

IN USD

IN JPY

above 4.5 m depth

IN INR

IN USD

IN JPY

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

4.5 - 9.0 m height

IN INR

IN USD

IN JPY

9.0 - 13.5 m height

IN INR

IN USD

IN JPY

FORM WORK

Providing form work with Centering for soffits of Reinforced Cement Concrete slabs or plain surfaces including strutting for raft, wall, column, etc., complete.

Below GL

0 - 3 m depth

IN INR

IN USD

IN JPY

3 – 4 m depth

IN INR

IN USD

IN JPY

4 – 5 m depth

IN INR

IN USD

IN JPY

5 – 6 m depth

IN INR

IN USD

IN JPY

6 – 7 m depth

IN INR

IN USD

IN JPY

Providing form work with Centering for soffits of Reinforced Cement Concrete for plain surfaces for beams, slabs, columns, stairs & walls, etc., complete.

Above G.L

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

PILING WORKS

Boring, providing and installation of bored cast-in-situ reinforced cement concrete piles of grade M30 of using SRC/OPC (43 grade) of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical winch machine all complete, including chipping of pile head and disposal, removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).

600 mm dia piles

IN INR

IN USD

IN JPY

450 mm dia piles

IN INR

IN USD

IN JPY

Pile Load Test

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile above 50 MT and up to 100 MT Safe capacity.

Initial test (Test Load 2.5 times the Safe capacity) by Maintained load method on test pile.

IN INR

IN USD

IN JPY

Routine test (Test Load 1.5 times the Safe capacity) by Maintained load method on working pile.

IN INR

IN USD

IN JPY

Lateral load testing of single pile in accordance with IS Code of practice IS: 2911 (Part IV) for determining safe allowable lateral load on pile. Above 50 MT and up to 100 MT capacity pile.

Initial test (Test Load 2.5 times the Safe capacity).

IN INR

IN USD

IN JPY

Routine test (Test Load 1.5 times the Safe capacity).

IN INR

IN USD

IN JPY

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerized equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.

IN INR

IN USD

IN JPY

REINFORCEMENT & STRUCTURAL STEEL WORKS

Supplying and fabricating Thermo Mechanically Treated High Corrosion Resistance (CRS) bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008, including fixing with binding wires, assembling, and laying in position for all RCC works as follows,

8 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

10 mm – 32 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

Structural steel work in single section / built up section, fixed with or without connecting plate including cutting, hoisting, fixing in position, including applying two coats of approved primer and two coats of approved epoxy paint all complete.

IN INR

IN USD

IN JPY

FINISHING WORKS

Masonry Work

Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M-sand)) for over 23 cm thick wall including curing etc. complete.

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

Above 4.5 m height

IN INR

IN USD

IN JPY

Extra labour for 11cm thick wall

IN INR

IN USD

IN JPY

Plastering Work

Special ceiling plastering for RCC slabs, and beams in CM 1:3 using Crushed stone sand (M-sand) – 10mm thick including hacking and curing, etc., complete.

IN INR

IN USD

IN JPY

Plastering (Internal) with cement mortar 1:3 (Crushed stone sand (M-sand)) for 12 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Plastering (External) with cement mortar 1:4 (Crushed stone sand (M-sand)) for 20 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Flooring Work

Granolithic flooring 50 mm thick with cement concrete 1:2:4 using 3-10 mm chips and top surface rendered smooth with cement including thread lining and 25 mm dia. G.I. pipe of necessary length for water outlet curing, etc., complete.

IN INR

IN USD

IN JPY

Supplying and fixing in position Cement based hydraulically pressed Anti-Skid tiles (pattern design) 20 mm thick in cement mortar 1:3, 20 mm thick & pointed with same colour of cement etc., complete.

IN INR

IN USD

IN JPY

Flooring with Macrona Marble slabs, of size 1200 x 1800 x 20 mm free from all defects in all floors over a base layer of CM 1:3, 20 mm thick. The marble slab shall be laid over the cement mortar by applying white cement slurry in between base mortar and marble slab. The marble slabs are to be laid that there shall be in line with another joint and uniform by using marble cutting machine without any damage to the sides of corners of the marble slab. The entire area at the marble flooring so laid shall be pointed with white cement neatly including polishing with polishing stone of grade 80 for rough, grade 200 for medium and grade 360 for nice, using necessary oxalic acid etc. so as to glassy and smooth and including hire charges for polishing machine and power consumption charges etc., The Macrona marble slabs, polishing stones, oxalic acid, tin oxide etc., proposed for the work shall be shown to the Engineer and got approved by them before use in the work etc., complete.

IN INR

IN USD

IN JPY

Painting Work

Painting two coats with approved cement paint over one coat of primer over cement plastered wall surface, including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

Painting of white washing of two coats including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

JOINERY WORKS

uPVC Doors

Providing and fixing factory made uPVC white colour casement / Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement door with 3D hinges made of (big series) frame 67 x 64mm & sash 67 x 110 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door up to 2.00 sqm)

IN INR

IN USD

IN JPY

Casement door with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm)

IN INR

IN USD

IN JPY

Fire Door

Providing and fixing fire-resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermiculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumescent fire seal strip of size 10x4 mm (minimum) all-round the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge.

IN INR

IN USD

IN JPY

Providing and fixing 50mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermiculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumescent fire seal strip of size 10 x 4 mm (minimum) all-round the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc., consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge.

IN INR

IN USD

IN JPY

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

IN INR

IN USD

IN JPY

uPVC Casement (openable) type window

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 2.50 sqm).

IN INR

IN USD

IN JPY

uPVC sliding window

Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm up to 2.50 sqm).

IN INR

IN USD

IN JPY

uPVC Ventilator

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension.

IN INR

IN USD

IN JPY

Rolling Shutter

Supplying and erecting rolling shutters of 76 mm 18 gauge of galvanized steel sheet with push and pull or self-coiling type operated by pulling hook with top cover including locking arrangements and fixed in position inside or outside, etc., complete and painting with priming coat of red oxide without lock. (Payment will be made by only for the actual opening of the shutters are rolled up wherever the shutters are to be fixed).

IN INR

IN USD

IN JPY

PLUMBING FOR WATER SUPPLY & SANITARY WORKS

Supplying CPVC pipes and specials of the following sizes including cutting threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brick work and plastering wherever necessary with scaffolding, etc., complete.

20 mm dia.

IN INR

IN USD

IN JPY

Supplying and fixing wheel valve of the following sizes

20 mm dia.

IN INR

IN USD

IN JPY

Supplying and fixing gate valve of the following sizes

20 mm dia.

IN INR

IN USD

IN JPY

Supplying and fixing C.P. Towel rails 45cm x 20 mm

IN INR

IN USD

IN JPY

Supplying and fixing C.P. Screw down tap of size 20 mm dia.

IN INR

IN USD

IN JPY

Supplying and fixing C.P. flush cock of size 20 mm

IN INR

IN USD

IN JPY

Supplying and fixing chromium plated brass soap dish

IN INR

IN USD

IN JPY

Providing and fixing 75mm dia. Nahini trap (floor trap) with brass gratings

IN INR

IN USD

IN JPY

Supplying and fixing best mirror of size 60cm x 45 cm of 6 mm thick with plywood back including necessary fittings, etc., complete.

IN INR

IN USD

IN JPY

Providing and fixing 15 cm x 10 cm S.W. gully trap with C.I. gratings in B.J. concrete in CM 1:4:10 with silt pit diaphragm arrangements, etc., complete.

IN INR

IN USD

IN JPY

Supplying and fixing flat back white glazed tipped or tongued urinals of 46.50 x 35.5 x 26.5 cm with 32 mm dia. lead wastepipe with Bell mouth opening of 75 cm long 15 mm dia. wheel valve with lead and brass connection, etc. complete.

IN INR

IN USD

IN JPY

Providing and fixing colour glazed European water closet with rose wood seating (Black) low level flushing tank with fittings, etc., complete.

IN INR

IN USD

IN JPY

Supplying and fixing 55 cm x 40 cm colour glazed wash basin with lead and brass connections, C.P. Pillar Tap, and other fittings, etc., complete.

IN INR

IN USD

IN JPY

Construction of inspection chambers of following sizes with earth work excavation for foundation, 23 cm thick concrete bed using 40 mm brick jelly concrete in CM 1:4:10 for foundation, brick work in CM 1:6 for chamber, plastering with CM 1:3, 12 mm thick, benching, channelling, supplying, and fixing 45 x 45 cm FRC heavy duty cover and frame, etc., complete.

IN INR

IN USD

IN JPY

Providing and fixing 110mm dia. PVC pipe with pipe bend for disposal of wastewater from toilet in pumping station.

IN INR

IN USD

IN JPY

MISCELLANEOUS WORKS

FRP Handrail & Chequered plate

Supplying and fixing of pultruded FRP handrail of 1000 mm height with material confirming to IS 6746-1994 and ASTM standards for mechanical properties. The work shall include all the materials, anchor fasteners and accessories required to fix the handrail and all the materials should be got approved by the Engineer before fixing in position as directed.

IN INR

IN USD

IN JPY

Supplying and fixing of pultruded FRP chequered plate of 8 mm thickness of required size with material confirming to IS 6746-1994 and ASTM standards for mechanical properties. The work shall include all the materials and accessories required to fix the chequered plate and all the materials should be got approved by the Engineer before fixing in position as directed.

IN INR

IN USD

IN JPY

Supplying and fixing of pultruded FRP platform grating and Staircase tread of 38 mm height of required size with material confirming to IS 6746-1994 and ASTM standards for mechanical properties. The work shall include all the materials and accessories required to install, and all the materials should be got approved by the Engineer before fixing in position as directed.

IN INR

IN USD

IN JPY

Steel ladder

Supplying and fixing of stain less steel ladder consisting of side support and footrest at every 200 mm all member of ladder made up of 18 SWG, 304 Grade Stainless Steel with stainless steel welded joints. The width of ladder is 500 mm.

IN INR

IN USD

IN JPY

Water proofing

Concrete with broken brick jelly 20 mm gauge in pure slacked lime over RCC roof slab in the proportion of 32:12½ (No sand to be used) well beaten with wooden beaters to the required depth of 80 mm thick and giving required slope and thickness to roof as required, etc., complete.

IN INR

IN USD

IN JPY

Terrace flooring with two courses of flat tiles of 15 cm x 15 cm x 12 mm using CM 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortar.

IN INR

IN USD

IN JPY

Providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 liter/10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per specification.

IN INR

IN USD

IN JPY

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by engineer incharge and consisting of: (i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement:3 coarse sand) including applying of twice (at base and top of mortar) cement slurry at 2.2 kg/sqm (each time) mixed with water proofing compound confirming to IS:2645 in the recommended proportion over the levelling course. Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportion. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm throughly embedded in the 2nd layer.

Using rough kota stone or equivalent

IN INR

IN USD

IN JPY

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified tone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound confirming to IS:2645 in the recommended proportions with a gap of 20 mm (minimum) between stone slabsand the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement:3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer incharge.

Using rough kota stone or equivalent

IN INR

IN USD

IN JPY

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels/subway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry:2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry:1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-10 i.e., by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete etc., as per specification. The product performance shall carry guarantee for 10 years against any leakage.

For vertical surface two coats @ 0.70 kg per sqm.

IN INR

IN USD

IN JPY

For horizontal surface two coats @ 1.10 kg per sqm.

IN INR

IN USD

IN JPY

Construction joints of concrete - GI sheets 30cm wide and 1.6 mm thick.

IN INR

IN USD

IN JPY

Expansion Joint

Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS:1838, including cost of primer, sealing compound Grade-A in expansion joints.

IN INR

IN USD

IN JPY

Providing and fixing in position Stainless steel Grade 304 plate - 1.0 mm thick as per design for expansion joints.

200mm wide

IN INR

IN USD

IN JPY

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade on concrete surface.

Two or more coats

IN INR

IN USD

IN JPY

Providing and fixing 160mm dia. PVC Rainwater downfall pipe from roof to the RWH chamber for collecting the rainwater.

IN INR

IN USD

IN JPY

Providing and fixing FRC heavy duty cover and frame of size 90 x 90 cm including necessary masonry work and plastering, etc., complete.

IN INR

IN USD

IN JPY

Interconnection of Porur PH 1800 mm dia MS delivery pipe with existing 2000 mm dia MS pipe by providing, supplying and erection of 2000 x 1800 mm Tee including excavation, cutting of existing pipe, jointing, backfilling and construction thrust block, etc. complete.

IN INR

IN USD

IN JPY

SCHEDULE2C CONSTRUCTION OF CHLORINATION BUILDING AT PORUR – CIVIL WORKS

EARTH WORKS

Earth work excavation for foundation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stony earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m etc. complete.

All kinds of soil

IN INR

IN USD

IN JPY

Excavating, supplying, and filling of local earth (including royalty) by mechanical transport up to a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

IN INR

IN USD

IN JPY

Disposal of surplus earth

IN INR

IN USD

IN JPY

CONCRETE AND ALLIED WORKS

Cement concrete 1:2:4 using crushed stone sand (M-sand) and 12mm to 20mm gauge hard broken stone jelly for plain cement concrete works including laying, ramming, curing, etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade using SRC/OPC (43 grade) for reinforced cement concrete structural elements under controlled water cement ratio with plasticizer using 20mm and downgraded machine broken granite stone jelly excluding the cost of Centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

4.5 - 9.0 m height

IN INR

IN USD

IN JPY

FORM WORK

Providing form work with Centering for soffits of Reinforced Cement Concrete slabs or plain surfaces including strutting for raft, wall, etc.

Below GL

0 - 3 m depth

IN INR

IN USD

IN JPY

Above GL

Providing form work with Centering for soffits of Reinforced Cement Concrete for plain surfaces for beams, slabs, columns, stairs & walls etc., complete.

0 - 3.0 m height

IN INR

IN USD

IN JPY

3.0 - 4.0 m height

IN INR

IN USD

IN JPY

4.0 - 5.0 m height

IN INR

IN USD

IN JPY

REINFORCEMENT & STRUCTURAL STEEL WORKS

Supplying and fabricating Thermo Mechanically Treated High Corrosion Resistance (CRS) bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008, including fixing with binding wires, assembling, and laying in position for all RCC works as follows,

8 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

10 mm - 32 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

Structural steel work in single section / built up section, fixed with or without connecting plate including cutting, hoisting, fixing in position, and applying two coats of approved primer and two coats of approved epoxy paint all complete.

IN INR

IN USD

IN JPY

Supplying & fixing M.S. grills for window and gate including two coats of primer with red lead etc. complete as directed.

IN INR

IN USD

IN JPY

FINISHING WORKS

Masonry Work

Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M-sand)) for over 23cm thick wall including curing etc. complete.

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

Above 4.5 m height

IN INR

IN USD

IN JPY

Plastering Work

Plastering (Internal) with cement mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Plastering (External) with cement mortar 1:4 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Flooring Work

Granolithic flooring 50 mm thick with cement concrete 1:2:4 using 3-10 mm chips and top surface rendered smooth with cement including thread lining and 25 mm dia. G.I. pipe of necessary length for water outlet curing, etc. complete.

IN INR

IN USD

IN JPY

Water proofing

Providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, in all respect etc., complete.

IN INR

IN USD

IN JPY

Concrete with broken brick jelly 20mm gauge in pure slacked lime over R.C.C. roof slab in the proportion of 32:12½ (No sand to be used) well beaten with wooden beaters to the required depth of 80mm thick and giving required slope and thickness to roof as required, etc., complete.

IN INR

IN USD

IN JPY

Terrace flooring with two course of flat tiles of 15 cm x 15 cm x 12 mm using CM 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortar.

IN INR

IN USD

IN JPY

Painting Work

Painting two coats with approved cement paint over one coat of primer over cement plastered wall surface, including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

Painting of white washing of two coats including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

JOINERY WORKS

uPVC Door

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking.

Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm)

IN INR

IN USD

IN JPY

uPVC Casement (openable) type window

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68mm & mullion 47 x 68 mm all having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 2.50 sqm).

IN INR

IN USD

IN JPY

uPVC fixed type window / Ventilator

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension.

IN INR

IN USD

IN JPY

Rolling Shutter

Supplying and erecting rolling shutters of 76 mm 18 gauge of galvanized steel sheet with push and pull or self-coiling type operated by pulling hook with top cover including locking arrangements and fixed in position inside or outside, etc., complete and painting with priming coat of red oxide without lock. (Payment will be made by only for the actual opening of the shutters are rolled up wherever the shutters are to be fixed)

IN INR

IN USD

IN JPY

MISCELLANEOUS WORKS

Providing and fixing 160mm dia. PVC Rainwater downfall pipe from roof to the RWH chamber for collecting the rainwater.

IN INR

IN USD

IN JPY

Supplying and providing chain link fence with RCC posts. The RCC posts will be of 2.5 m c.c. and of 2.75 m ht. The posts will be 100 mm square at top and 150 mm square at bottom 2.15 m ht. above ground level and 0.60 m below ground level fixed in c.c. foundation in 1:4:8 of 40 mm size stone jelly used. The foundation is of size 45 x 45 x 90 cm including sand and filling of 15 cm ht. The fencing will be of chain link 75 mm size 10 gauge. The height of fence is 2.0 m after leaving 75 mm gap from ground level including fixing the fence with the posts using G.I. binding wire etc. complete.

IN INR

IN USD

IN JPY

Supplying and fixing barbed wire fencing with the existing R.C.C. posts. The barbed fencing is of 5 rows horizontally and 7 rows vertically. The barbed wire will be of 2 ply 12 gauge including binding the wire with the posts etc. complete as approved.

IN INR

IN USD

IN JPY

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement:2 coarse sand), including the cost of required Centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement:1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size).

IN INR

IN USD

IN JPY

SCHEDULE:2D.CONSTRUCTION OF SECURITY BUILDING AT PERUR – CIVIL WORKS

EARTH WORKS

Earth work excavation for foundation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stony earth and earth mixed with small size boulders as per SS 20B with initial lead of 10 m and lift of 2.0 m etc. complete.

All kinds of soil

IN INR

IN USD

IN JPY

Excavating, supplying, and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

IN INR

IN USD

IN JPY

Disposal of Surplus Earth

IN INR

IN USD

IN JPY

CONCRETE AND ALLIED WORKS

Cement concrete 1:2:4 using crushed stone sand (M-sand) and 12 to 20mm gauge hard broken stone jelly for plain cement concrete works including laying, ramming, curing, etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade using SRC/OPC (43 grade) for reinforced cement concrete structural elements under controlled water cement ratio with plasticizer using 20mm and downgraded machine broken granite stone jelly excluding the cost of Centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

FORM WORK

Providing form work with Centering for soffits of Reinforced Cement Concrete slabs or plain surfaces including strutting for raft, wall, etc.

Below GL

0 - 3 m depth

IN INR

IN USD

IN JPY

Above GL

Providing form work with Centering for soffits of Reinforced Cement Concrete for plain surfaces up to 3.0 m for beams, slabs, columns, stairs & walls etc., complete.

IN INR

IN USD

IN JPY

REINFORCEMENT STEEL WORK

Supplying and fabricating Thermo Mechanically Treated High Corrosion Resistance (CRS) bars manufactured by Primary steel producers / Integrated Steel Plants as per IS:1786-2008, including fixing with binding wires, assembling, and laying in position for all RCC works as follows,

8 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

10 mm – 32 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

FINISHING WORKS

Masonry Work

Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M-sand)) for over 23 cm thick wall including curing etc. complete.

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

Plastering Work

Plastering (Internal) with cement mortar 1:3 (Crushed stone sand (M-sand)) for 12 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Plastering (External) with cement mortar 1:4 (Crushed stone sand (M-sand)) for 20 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Flooring Work

Granolithic flooring 50 mm thick with cement concrete 1:2:4 using 3-10 mm chips and top surface rendered smooth with cement including thread lining and 25 mm dia. G.I. pipe of necessary length for water outlet curing, etc. complete.

IN INR

IN USD

IN JPY

Water proofing

Providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, in all respect etc., complete.

IN INR

IN USD

IN JPY

Concrete with broken brick jelly 20mm gauge in pure slacked lime over RCC roof slab in the proportion of 32:12½ (No sand to be used) well beaten with wooden beaters to the required depth of 80mm thick and giving required slope and thickness to roof as required, etc., complete.

IN INR

IN USD

IN JPY

Terrace flooring with two course of flat tiles of 15 cm x 15 cm x 12 mm using CM 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortar.

IN INR

IN USD

IN JPY

Painting Work

Painting two coats with approved cement paint over one coat of primer over cement plastered wall surface, including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

Painting of white washing of two coats including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

JOINERY WORKS

uPVC Door

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking.

Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm)

IN INR

IN USD

IN JPY

uPVC Casement (openable) type window

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 2.50 sqm).

IN INR

IN USD

IN JPY

MISCELLANEOUS WORKS

Providing and fixing 160mm dia. PVC Rainwater downfall pipe from roof to the RWH chamber for collecting the rainwater.

IN INR

IN USD

IN JPY

SCHEDULE 2E. CONSTRUCTION OF SECURITY BUILDING AT PORUR – CIVIL WORKS

EARTH WORKS

Earth work excavation for foundation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stony earth and earth mixed with small size boulders as per SS 20B with initial lead of 10 m and lift of 2.0 m etc. Complete.

All kinds of soil

IN INR

IN USD

IN JPY

Excavating, supplying, and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

IN INR

IN USD

IN JPY

Disposal of Surplus Earth

IN INR

IN USD

IN JPY

CONCRETE AND ALLIED WORKS

Cement concrete 1:2:4 using crushed stone sand (M-sand) and 12 to 20 mm gauge hard broken stone jelly for plain cement concrete works including laying, ramming, curing, etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade SRC/OPC (43 grade) for reinforced cement concrete structural elements under controlled water cement ratio with plasticizer using 20 mm and downgraded machine broken granite stone jelly excluding the cost of Centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

FORM WORK

Providing form work with Centering for soffits of Reinforced Cement Concrete slabs or plain surfaces including strutting for raft, wall, etc.

Below GL

0 – 3.0 m depth

IN INR

IN USD

IN JPY

Above GL

Providing form work with Centering for soffits of Reinforced Cement Concrete for plain surfaces up to 3.0 m for beams, slabs, columns, stairs & walls etc., complete.

IN INR

IN USD

IN JPY

REINFORCEMENT STEEL WORK

Supplying and fabricating Thermo Mechanically Treated High Corrosion Resistance (CRS) bars manufactured by Primary steel producers / Integrated Steel Plants as per IS:1786-2008, including fixing with binding wires, assembling, and laying in position for all RCC works as follows,

8 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

10 mm - 32 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

FINISHING WORKS

Masonry Work

Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M-sand)) for over 23 cm thick wall including curing etc. complete.

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

Plastering Work

Plastering (Internal) with cement mortar 1:3 (Crushed stone sand (M-sand)) for 12 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Plastering (External) with cement mortar 1:4 (Crushed stone sand (M-sand)) for 20 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Flooring Work

Granolithic flooring 50 mm thick with cement concrete 1:2:4 using 3-10 mm chips and top surface rendered smooth with cement including thread lining and 25 mm dia. G.I. pipe of necessary length for water outlet curing, etc. complete.

IN INR

IN USD

IN JPY

Water proofing

Providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, in all respect etc., complete.

IN INR

IN USD

IN JPY

Concrete with broken brick jelly 20 mm gauge in pure slacked lime over R.C.C. roof slab in the proportion of 32:12½ (No sand to be used) well beaten with wooden beaters to the required depth of 80 mm thick and giving required slope and thickness to roof as required, etc., complete.

IN INR

IN USD

IN JPY

Terrace flooring with two course of flat tiles of 15 cm x 15 cm x 12 mm using CM 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortar.

IN INR

IN USD

IN JPY

Painting Work

Painting two coats with approved cement paint over one coat of primer over cement plastered wall surface, including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

Painting of white washing of two coats including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

JOINERY WORKS

uPVC Door

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking.

Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm)

IN INR

IN USD

IN JPY

uPVC Casement (openable) type window

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window up to 2.50 sqm).

IN INR

IN USD

IN JPY

MISCELLANEOUS WORKS

Providing and fixing 160mm dia. PVC Rainwater downfall pipe from roof to the RWH chamber for collecting the rainwater.

IN INR

IN USD

IN JPY

SCHEDULE 3. CONSTRUCTION OF GROUND LEVEL RESERVOIR (GLR) AT PORUR (15 ML) – CIVIL WORKS

EARTH WORKS

Clearing scrub jungle

IN INR

IN USD

IN JPY

Earth work excavation for foundation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stony earth and earth mixed with small size boulders as per SS 20B with initial lead of 10 m and lift of 2.0 m etc. complete.

IN INR

IN USD

IN JPY

Extra for every additional one-meter lift or part thereof over initial lift etc. complete.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Driving sheet piles for one meter length of gallery each side in sandy soil.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Removing sheet piles from one meter length of gallery each side including stacking the sheet piles properly.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Supplying and filling crushed stone sand (M-sand) for foundations and basement including watering, consolidating, ramming, etc., complete.

IN INR

IN USD

IN JPY

Excavating, supplying, and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

IN INR

IN USD

IN JPY

Disposal of surplus earth

IN INR

IN USD

IN JPY

CONCRETE AND ALLIED WORKS

Cement concrete 1:2:4 using crushed stone sand (M-sand) and 12 mm to 20 mm gauge hard broken stone jelly for plain cement concrete works including laying, ramming, curing, etc., complete.

Below GL

1.5 - 4.5 m depth

IN INR

IN USD

IN JPY

above 4.5 m depth

IN INR

IN USD

IN JPY

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade using SRC/OPC (43 grade) for reinforced cement concrete structural elements under controlled water cement ratio with plasticizer using 20 mm and downgraded machine broken granite stone jelly excluding the cost of Centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification etc., complete.

Below GL

0 - 1.5 m depth

IN INR

IN USD

IN JPY

1.5 - 4.5 m depth

IN INR

IN USD

IN JPY

above 4.5 m depth

IN INR

IN USD

IN JPY

Above GL

0 - 4.5 m height

IN INR

IN USD

IN JPY

4.5 - 9.0 m height

IN INR

IN USD

IN JPY

FORM WORK

Providing form work with Centering for soffits of Reinforced Cement Concrete slabs or plain surfaces including strutting for raft, wall, etc.

Below GL

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Above GL

Providing form work with Centering for soffits of Reinforced Cement Concrete for plain surfaces for beams, slabs, columns, stairs & walls.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

PILING WORKS

Boring, providing and installation of bored cast-in-situ reinforced cement concrete piles of grade M30 using SRC/OPC (43 grade) of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical winch machine all complete, including chipping of pile head and disposal, removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).

600 mm dia piles

IN INR

IN USD

IN JPY

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile above 50 MT and up to 100 MT Safe capacity.

Initial test (Test Load 2.5 times the Safe capacity) by Maintained load method on test pile.

IN INR

IN USD

IN JPY

Routine test (Test Load 1.5 times the Safe capacity) by Maintained load method on working pile.

IN INR

IN USD

IN JPY

Lateral load testing of single pile in accordance with IS Code of practice IS: 2911 (Part IV) for determining safe allowable lateral load on pile. Above 50 MT and up to 100 MT capacity pile.

Initial test (Test Load 2.5 times the Safe capacity)

IN INR

IN USD

IN JPY

Routine test (Test Load 1.5 times the Safe capacity)

IN INR

IN USD

IN JPY

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerized equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.

IN INR

IN USD

IN JPY

REINFORCEMENT STEEL WORK

Supplying and fabricating Thermo Mechanically Treated High Corrosion Resistance (CRS) bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008, including fixing with binding wires, assembling, and laying in position for all RCC works as follows,

8 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

10 mm - 32 mm dia. rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

FINISHING WORKS

Masonry Work

Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M-sand)) for over 23 cm thick wall including curing etc. complete.

IN INR

IN USD

IN JPY

Plastering Work

Plastering (Internal) with cement mortar 1:3 (Crushed stone sand (M-sand)) for 12 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Plastering (External) with cement mortar 1:4 (Crushed stone sand (M-sand)) for 20 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Flooring Work

Supplying and fixing in position Cement based hydraulically pressed Anti-Skid tiles (pattern design) 20 mm thick in cement mortar 1:3, 20mm thick & pointed with same colour of cement etc., complete.

IN INR

IN USD

IN JPY

Painting Work

Finishing with food grade epoxy paint to be applied in two coats to achieve a minimum total dry film thickness of 200 microns at all locations inside the reservoir, prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.

On Concrete work

IN INR

IN USD

IN JPY

Painting two coats with approved cement paint over one coat of primer over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

JOINERY WORKS

Providing and fixing factory made uPVC white colour casement door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking.

IN INR

IN USD

IN JPY

Providing and fixing factory made uPVC white colour fixed ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Fixed ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension.

IN INR

IN USD

IN JPY

MISCELLANEOUS WORKS

FRP Handrail

Supplying and fixing of pultruded FRP handrail of 1000 mm height with material confirming to IS 6746-1994 and ASTM standards for mechanical properties. The work shall include all the materials, anchor fasteners and accessories required to fix the handrail and all the materials should be got approved by the Engineer before fixing in position as directed.

IN INR

IN USD

IN JPY

Pre-cast louvers

Providing, hoisting, and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement:2 coarse sand), including the cost of required Centering, shuttering but excluding the cost of reinforcement, with 1:1.5:3 (1 cement:1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size).

IN INR

IN USD

IN JPY

Providing, hoisting, and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1 cement:3 coarse sand), cost of required Centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:1.5:3 (1 cement:1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size).

IN INR

IN USD

IN JPY

Providing and fixing FRC heavy duty cover and frame of size 90 x 90 cm including necessary masonry work and plastering, etc., complete.

IN INR

IN USD

IN JPY

Water Proofing

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by engineer incharge and consisting of: (i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement:3 coarse sand) including applying of twice (at base and top of mortar) cement slurry at 2.2 kg/sqm (each time) mixed with water proofing compound confirming to IS:2645 in the recommended proportion over the levelling course. Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportion. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm throughly embedded in the 2nd layer.

Using rough kota stone or equivalent

IN INR

IN USD

IN JPY

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified tone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound confirming to IS:2645 in the recommended proportions with a gap of 20 mm (minimum) between stone slabsand the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement:3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer incharge.

Using rough kota stone or equivalent

IN INR

IN USD

IN JPY

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels/subway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry:2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry:1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-10 i.e., by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification etc. The product performance shall carry guarantee for 10 years against any leakage.

For vertical surface two coats @ 0.70 kg per sqm

IN INR

IN USD

IN JPY

For horizontal surface one coat @ 1.10 kg per sqm.

IN INR

IN USD

IN JPY

Providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect etc., complete.

IN INR

IN USD

IN JPY

Concrete with broken brick jelly 20 mm gauge in pure slacked lime over R.C.C. roof slab in the proportion of 32:12½ (No sand to be used) well beaten with wooden beaters to the required depth of 80 mm thick and giving required slope and thickness to roof as required, etc., complete.

IN INR

IN USD

IN JPY

Terrace flooring with two courses of flat tiles of 15 cm x 15 cm x 12 mm using CM 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortar etc., complete.

IN INR

IN USD

IN JPY

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture, to give an even shade over concrete surface.

Two or more coats

IN INR

IN USD

IN JPY

Construction joints of concrete - Construction joints of PVC water bar 150 mm wide with single bulb.

IN INR

IN USD

IN JPY

Steel ladder

Supplying and fixing of stain less steel ladder consisting of side support and footrest at every 200mm all member of ladder made up of 18 SWG, 304 Grade Stainless Steel with stainless steel welded joints. The width of ladder is 500 mm.

IN INR

IN USD

IN JPY

Supplying and fixing of 150 mm dia. FRP ventilating pipe of 2 m length each with cowl.

IN INR

IN USD

IN JPY

Providing and fixing 160 mm dia. PVC Rainwater downfall pipe from roof to the RWH chamber for collecting the rainwater.

IN INR

IN USD

IN JPY

Expansion Joint

Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS:1838, including cost of primer, sealing compound Grade-A in expansion joints.

IN INR

IN USD

IN JPY

Providing and fixing in position Stainless steel Grade 304 plate - 1.0 mm thick as per design for expansion joints.

200 mm wide

IN INR

IN USD

IN JPY

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS:10910, on 12 mm dia. steel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15 cm cement concrete block 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) complete as per design.

IN INR

IN USD

IN JPY

Testing of the GLR for water tightness by retaining water for 7 days as per IS 3370 (Part 1) including cost of water, pumping water into the GLR, and bailing out of water (after testing) with necessary pumping equipments including rectifying the leak if any occurred during the test and other incidental and operational charges etc. complete.

IN INR

IN USD

IN JPY

SCHEDULE 4:CONSTRUCTION OF MISCELLANEOUS WORKS AT PERUR & PORUR – CIVIL WORKS

A.STORM WATER DRAIN WORKS

Construction of Storm water drain as per drawing at Perur PH location including all excavation, concreting, shuttering, reinforcement steel, backfilling, etc. complete as per approval of engineer.

IN INR

IN USD

IN JPY

Construction of Storm water drain as per drawing at Porur GLR and PH location including all excavation, concreting, shuttering, reinforcement steel, backfilling, etc. complete as per approval of engineer.

IN INR

IN USD

IN JPY

Construction of Rainwater Harvesting structure including borehole at the Perur PH campus.

IN INR

IN USD

IN JPY

Construction of Rainwater Harvesting structure including borehole at the Porur PH & GLR campus.

IN INR

IN USD

IN JPY

B. INTERNAL ROAD WORK

Construction of internal road as per drawing and specification at Perur PH location including subgrade preparation with excavation, filling, soling and laying of WMM, all required bituminous layers with tack coat, etc. with supplying and fixing of kerb stone at both side of the road complete as per specification.

IN INR

IN USD

IN JPY

Construction of internal road as per drawing and specification at Porur GLR and PH location including subgrade preparation with excavation, filling, soling and laying of WMM, all required bituminous layers with tack coat, etc. with supplying and fixing of kerb stone at both side of the road complete as per specification.

IN INR

IN USD

IN JPY

Construction of Car park as per drawing and specification at Perur PH location including subgrade preparation with excavation, filling, soling, WMM and laying of concrete paver block, etc. with marking of parking lane complete as per approval of engineer.

IN INR

IN USD

IN JPY

C. BOUNDARY WALL WORKS AT PERUR

Earth work excavation and depositing on bank with initial lead of 10m and lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stony earth and earth mixed stony earth and earth mixed with small sizes boulders and hard gravelly soil as per SS 20 B etc. complete.

IN INR

IN USD

IN JPY

Cement concrete 1:2:4 using crushed stone sand (M-sand) and 12 mm to 20 mm gauge hard broken stone jelly for plain cement concrete works including laying, ramming, curing, etc., complete.

IN INR

IN USD

IN JPY

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade using SRC/OPC (43 grade) for reinforced cement concrete structural elements under controlled water cement ratio with plasticizer using 20mm and downgraded machine broken granite stone jelly excluding the cost of Centering and shuttering and reinforcement but including compacting, curing, fixing clamps etc., as per standard specification etc., complete.

IN INR

IN USD

IN JPY

Providing form work with Centering for soffits of Reinforced Cement Concrete for plain surfaces up to 3.0 m for beams, slabs, columns, footings & walls.

IN INR

IN USD

IN JPY

Supplying and fabricating Thermo Mechanically Treated High Corrosion Resistance (CRS) bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008, including fixing with binding wires, assembling and laying in position for all RCC works as follows,

8 mm dia rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

10 mm -32 mm dia rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M-sand)) for over 23 cm thick wall including curing etc. complete.

IN INR

IN USD

IN JPY

Plastering with cement mortar 1:4 (Crushed stone sand (M-sand)) for 20 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS:1838, including cost of primer, sealing compound Grade-A in expansion joints.

IN INR

IN USD

IN JPY

Supplying and fixing barbed wire fencing over the proposed compound wall with 'L' angle iron 50 x 50 x 6 mm & 1.45 mm posts bent to shape at 2.5m centers with 6 rows of barbed wire and also in a zig zag manner at 25cm c/c connecting all the rows with barbed wire will be of 2 ply and 12 gauge or other approved size including drilling hole in 'L' iron posts and fixing the posts in cement concrete 1:2:4 of size 15 x 15 x 45 cm etc. complete.

IN INR

IN USD

IN JPY

Coping with Cement Concrete of 50 mm thick on top of the brick wall and finished neatly including curing etc. complete as directed.

IN INR

IN USD

IN JPY

Refilling with excavated soil complying with standard specification for filling in foundations and basement.

IN INR

IN USD

IN JPY

Supplying and erection of MS sliding electric operated gate of 4.5 m length and 2 m height as per design approved by engineer including fixing letter ''METROWATER” with logo and applying two coats of primer with red lead etc. compete.

IN INR

IN USD

IN JPY

Supplying and fixing of MS wicket gate of size 1.0 m x 2.0 m as per approved design including fixing in position with hold fasts etc. with locking arrangements as approved and two coats of priming with red oxide etc. complete.

IN INR

IN USD

IN JPY

Painting two coats of approved cement paint over one coat of primer on cement plastered wall surface, including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

Painting with superior quality epoxy ready mixed paint of approved colour of two coats on steel gates, as directed by Engineer in charge.

IN INR

IN USD

IN JPY

Supply and fixing of Illuminated display boards at Perur and Porur PH entrance including the required structure, excavation, and foundation, etc., if any required complete all as per approved design.

IN INR

IN USD

IN JPY

Supply and fixing of electrically operated Boom barrier after the entrance gate at Perur and Porur PH entrance including the required structure, excavation, and foundation, etc., if any required complete all as per approved design.

IN INR

IN USD

IN JPY

D. BOUNDARY WALL WORKS AT PORUR

Earth work excavation and depositing on bank with initial lead of 10m and lift of 2 m in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stony earth and earth mixed stony earth and earth mixed with small sizes boulders and hard gravelly soil as per SS 20 B etc. complete.

IN INR

IN USD

IN JPY

Cement concrete 1:2:4 using crushed stone sand (M-sand) and 12 mm to 20 mm gauge hard broken stone jelly for plain cement concrete works including laying, ramming, curing, etc., complete.

IN INR

IN USD

IN JPY

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade using SRC/OPC (43 grade) for reinforced cement concrete structural elements under controlled water cement ratio with plasticizer using 20mm and downgraded machine broken granite stone jelly excluding the cost of Centering and shuttering and reinforcement but including compacting, curing, fixing clamps etc., as per standard specification etc., complete.

IN INR

IN USD

IN JPY

Providing form work with Centering for soffits of Reinforced Cement Concrete for plain surfaces up to 3.0 m for beams, slabs, columns, footings & walls.

IN INR

IN USD

IN JPY

Supplying and fabricating Thermo Mechanically Treated High Corrosion Resistance (CRS) bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008, including fixing with binding wires, assembling and laying in position for all RCC works as follows,

8 mm dia rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

10 mm -32 mm dia rod (Fe-500D Grade with CRS material)

IN INR

IN USD

IN JPY

Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M-sand)) for over 23 cm thick wall including curing etc. complete.

IN INR

IN USD

IN JPY

Plastering with cement mortar 1:4 (Crushed stone sand (M-sand)) for 20 mm thick including curing, etc., complete.

IN INR

IN USD

IN JPY

Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS:1838, including cost of primer, sealing compound Grade-A in expansion joints.

IN INR

IN USD

IN JPY

Supplying and fixing barbed wire fencing over the proposed compound wall with 'L' angle iron 50 x 50 x 6 mm & 1.45 mm posts bent to shape at 2.5m centers with 6 rows of barbed wire and also in a zig zag manner at 25cm c/c connecting all the rows with barbed wire will be of 2 ply and 12 gauge or other approved size including drilling hole in 'L' iron posts and fixing the posts in cement concrete 1:2:4 of size 15 x 15 x 45 cm etc. complete.

IN INR

IN USD

IN JPY

Coping with Cement Concrete of 50 mm thick on top of the brick wall and finished neatly including curing etc. complete as directed.

IN INR

IN USD

IN JPY

Refilling with excavated soil complying with standard specification for filling in foundations and basement.

IN INR

IN USD

IN JPY

Supplying and erection of MS sliding electric operated gate of 4.5 m length and 2 m height as per design approved by engineer including fixing letter ''METROWATER” with logo and applying two coats of primer with red lead etc. compete.

IN INR

IN USD

IN JPY

Supplying and fixing of MS wicket gate of size 1.0 m x 2.0 m as per approved design including fixing in position with hold fasts etc. with locking arrangements as approved and two coats of priming with red oxide etc. complete.

IN INR

IN USD

IN JPY

Painting two coats of approved cement paint over one coat of primer on cement plastered wall surface, including cleaning preparing the surface and curing, etc., complete.

IN INR

IN USD

IN JPY

Painting with superior quality epoxy ready mixed paint of approved colour of two coats on steel gates, as directed by Engineer in charge.

IN INR

IN USD

IN JPY

Supply and fixing of Illuminated display boards at Porur PH entrance including the required structure, excavation, and foundation, etc., if any required complete all as per approved design.

IN INR

IN USD

IN JPY

Supply and fixing of electrically operated Boom barrier after the entrance gate at Porur PH entrance including the required structure, excavation, and foundation, etc., if any required complete all as per approved design.

IN INR

IN USD

IN JPY

E. GREEN BELT AND LANDSCAPPING WORKS AT PORUR AND PERUR

Preparing and making greenbelt and landscaping works inside the GLR & Pump House campus other than structures and road areas at Porur and Perur by planting approved plants and grass turf as per drawing and instruction of Engineer.

IN INR

IN USD

IN JPY

SCHEDULE 5:SUPPLY AND INSTALLATION OF ELECTRICAL, MECHANICAL, INSTRUMENTATION CONTROL AND AUTOMATION WORKS AT PERUR

IN INR

IN USD

IN JPY

Supply, Delivery, Installation, Testing & Commissioning with complete Termination & Jointing with Indoor HT Termination Kits of various sizes of Aluminium conductor, XLPE, 11kV armoured cable complete erected on trays or underground to be excavated at a depth of 1 m putting 6” layer of sand and covering the cable with brick, sand and route markers and refilling the earth to make good as directed.

a.From 11kV Outgoing feeders at CP1 to 11kV Main Incomers at CP2

Aluminium conductor, XLPE, 11kV, 3Core x 400 sq.mm armoured cable

IN INR

IN USD

IN JPY

Indoor Termination Kit for 11kV XLPE Screened 3 Core x 400 sq.mm cable

IN INR

IN USD

IN JPY

b.From 11kV Outgoing Feeder to Auxiliary transformers.

Aluminium conductor, XLPE, 11kV, 3Core x 300 sq.mm armoured cable.

IN INR

IN USD

IN JPY

Indoor Termination Kit for 11kV XLPE Screened 3 Core x 300 sq.mm cable.

IN INR

IN USD

IN JPY

(i)From 11 kV VCB Panel to MV VFD Panel

(ii) From 11kV MV VFD Panel to HT Main Pump-motor

Aluminium conductor, XLPE, 11kV, 3Core x 240 sq.mm armoured cable.

IN INR

IN USD

IN JPY

Indoor Termination Kit for 11kV XLPE Screened 3 Core x 240 sq.mm cable.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Supplying, delivery, Installation, Testing & Commissioning of dust and vermin proof local Push Button station fabricated in FRP sheet enclosure with hinged door erected near the Main pump set for Switching the pump set “ON" and "OFF" with 1 No. "ON", 1 No. "OFF" and 1 No. Emergency "EM" push buttons ("EM" push button shall be Mushroom type lockable in "OFF" position), with LED type panel board indicating lamps with required colour suitable for 220V, AC 50 Hz mounted on an angle or ISMC frame support at a convenient height for operating the push buttons and above the local MFL with provision for earthing including incidental civil/ mechanical works etc., complete.

IN INR

IN USD

IN JPY

Supply, Delivery, Installation, Testing & Commissioning of 3 phase auxiliary transformer, 11/0.433 kV, 50 Hz., 400 kVA, oil immersed and naturally cooled indoor/ outdoor type, copper wound transformer, Dyn11 delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40°C by thermometer in oil and 45°C by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 1150 Watts at 50% load, 3300 Watts at 100% load as per IS:1180 2014 energy efficiency level latest amendment-4 energy efficiency level - 2 (earlier efficiency level-3), with necessary permissions of Electrical Inspector.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Supply, Delivery, Installation, Testing and Commissioning of 415V (Low Voltage) Switchgear with necessary accessories with complete.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Lighting Distribution Board (For all indoor areas) - Industrial Type TPMCB DB with IP 54 Protection 8 Ways 3 Phase DB, Per Phase Isolation (PPI) suitable for Lighting with One (1) No. FP, 32 A MCB + Three No. (3) DP 40 A RCCB (30mA sensitivity) for each phase incoming and for outgoings as follows: (i) 16 A SP MCBs (C-Curve) - 12 Nos. (ii) 16 A TPN MCBs (C-Curve) - 4Nos.

IN INR

IN USD

IN JPY

SITC of 110V DC battery bank including MS/Teakwood battery stand, interconnect wiring, distribution board etc. as required complete in all respect of rating:

110V DC, 120 AH Ni-Cd Battery Bank with Maintenance free battery cell bank & connecting wires, stand in complete.

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

IN INR

IN USD

IN JPY

Supply, Delivery, Installation, Testing & Commissioning with complete Termination & Jointing of Aluminium conductor, XLPE/ PVC, 1.1kV armoured cable complete installed in approved trench/ on trays/ or underground as directed.

1.1kV, Aluminium conductor, XLPE / PVC insulated & armoured Power cable.

4C x 16 Sq.mm (for Inst. SCADA, EOT Crane, Street Lighting DB, Indoor Lighting DBs, Receptacles)

IN INR

IN USD

IN JPY

3.5C x 35 Sq.mm (for Battery Charger Panel, DCDB, Ventilation DB-1, 2)

IN INR

IN USD

IN JPY

3.5C x 70 Sq.mm (for MOV DBs, Ventilation DBs & MLDB Panel)

IN INR

IN USD

IN JPY

3.5C x 120 Sq.mm (for APFC & ACDB Panels)

IN INR

IN USD

IN JPY

3.5C x 300 Sq.mm (from Transformer to PCC)

IN INR

IN USD

IN JPY

3C x 16 Sq.mm (Motors from 5.5kW to 15 kW)

IN INR

IN USD

IN JPY

1.1kV Copper Power & Control Cables with Cables, Termination kits, glands, lugs, straight thru joints etc. with all required accessories. All complete works.

3C x 4 sq.mm, Cu. Conductor (for MOVs)

IN INR

IN USD

IN JPY

10C x 2.5 sq mm, Cu. Conductor (Transformer to PMCC, PMCC to APFC panel, Trf. To MV panel etc.) (unarmoured)

IN INR

IN USD

IN JPY

12 core x 2.5 sq.mm, Cu. Conductor (from VCB motor feeder to MV VFD Panel) (unarmoured)

IN INR

IN USD

IN JPY

4C x 2.5 sq mm, Cu. Conductor (For LPBS- 2 Runs, Street light poles JB)

IN INR

IN USD

IN JPY

3 core x 2.5 sq.mm, Cu. Conductor (For Axial Fans, Street lights)

IN INR

IN USD

IN JPY

3 core x 2.5 sq.mm, Cu. Conductor (DCDB to 11kV Switchgear etc.)

IN INR

IN USD

IN JPY

Supply, Installation, Testing & Commissioning of following sizes of FRP ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders etc., complete as per the specifications given in employers requirement.

600 mm x 100 mm x 3 mm (for Power Cables)

IN INR

IN USD

IN JPY

450 mm x 100 mm x 3 mm (for Power Cables)

IN INR

IN USD

IN JPY

Supply, Installation, Testing and Commissioning of FRP perforated cable trays with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc. complete and the tray should be fitted on the wall / Ceiling etc. complete as per the specifications;

450 mm x 75 mm x 3 mm (for Power Cables)

IN INR

IN USD

IN JPY

300 mm x 75 mm x 3 mm (for Power/ Control Cables)

IN INR

IN USD

IN JPY

150 mm x 75 mm x 3 mm (for Control Cables)

IN INR

IN USD

IN JPY

RCC Hume pipe, 1 m long, 200 mm dia with collars for Road crossings for Cable & Earth Strip crossing.

IN INR

IN USD

IN JPY

Supply, Installation, Testing and Commissioning of Lighting System with following major equipment, items as per scope, specification and drawings.

Supply of Lighting Luminaires

SITC of 95W LED High Bay Luminaire with high power LED made of pressure diecast aluminium housing with powder coated, Supply Input voltage 120 – 270 V AC, P.F > 0.90, high power LED’s having efficacy >130 lumines/watt, System efficacy > 100 lm/W and junction temperature < 70°C, with Ingress protection IP66, IK05, Driver surge protection 4KV, In house additional Surge protection ≥ 5KV with wide/ Narrow beam optics, THD < 10% at 110 Volts AC, driver efficiency > 90%, CCT: 3000 K – 5700 K, minimum CRI > 70, The LEDs shall be of SMD type (not COB type). The luminaire supplier shall submit the LM79 and LM80 report of the luminaire from the approved NABL accredited laboratory, etc., complete. (For Pump House Low area).

IN INR

IN USD

IN JPY

SITC of 150W LED High Bay Luminaire with high power LED made of pressure diecast aluminium housing with powder coated, Supply Input voltage 120 – 270 V AC, P.F > 0.90, high power LED’s having efficacy > 130 lumines/watt, System efficacy > 100 lm/W and junction temperature < 70°C, with Ingress protection IP66, IK05, Driver surge protection 4KV, In house additional Surge protection ≥ 5KV with wide/ Narrow beam optics, THD < 10% at 110 Volts AC, driver efficiency > 90%, CCT: 3000 K – 5700 K, minimum CRI > 70, The LEDs shall be of SMD type (not COB type). The luminaire supplier shall submit the LM79 and LM80 report of the luminaire from the approved NABL accredited laboratory, etc., complete. (For Pump House High area).

IN INR

IN USD

IN JPY

SITC of IP20 surface round LED downlighter compatible with system wattage 12W-18W and luminaire lumens not less than 1200 lumens. The system efficacy shall be 100 lm/W. The housing shall be PC engineered with diffused optics with polycarbonate diffuser for better distribution of light. LED make: that satisfies IEC62471 Photobiological/RoHS Standards with and LED Efficacy of > 150 lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120 Deg LED Beam Angle, CRI > 80, Life of LED as per L70 > 30000 burning hours, Ambient temp - 0 to 50 Deg C, Driver efficiency > 85%, THD < 15%, Power factor > 0.95, Inbuilt Surge protection in CM ≥ 2.0KV, LED Driver with Voltage range 150-270V AC and Safety Extra Low Voltage Safe level < 60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. Driver shall be potted driver with three terminals of P, L, E and both driver and luminaire shall be BIS compliance.(For Toilets other indoor rooms)

IN INR

IN USD

IN JPY

SITC of 4’ LED batten with wattage 34W and System Efficacy & System lumens of ≥ 117 lm/W 4000 lm respectively. The type of LED shall be SMD type mounted on MCPCB which is mechanically fixed (no glue pasting) with CCT of 6500 K and CRI > 80. The housing material shall be aluminium rugged for industrial use. The life of batten shall be 50000 hours at L70. The LED shall be of SDCM < 5. The IP rating of the luminaire shall be IP40. The ambient temperature shall be 0-45 deg C. The luminaire optical element shall be UV protected polycarbonate. The luminaire shall be operable from 140 – 270V AC with PF > 0.9 and THD < 10%. The driver shall be encapsulated type and placed within the luminaire. The driver shall be with in-built surge protection of > 4kV. Drivers shall be flicker free and complies to IEEE P1789 standard; ripple < 5%. The efficiency of driver shall be > 90%. The luminaire shall be BIS approved and carry “R” number. EMI/EMC Compliance. (For Electrical Room, Control Room, Storeroom, Transformer rooms, DG room, AC room, office room etc.)

IN INR

IN USD

IN JPY

SITC of IP65, IK08 4’ LED luminaire with special application luminaire shall be designed to provide undisrupted lighting for dusty and humid indoor application. The luminaire shall be with all-weather extruded aluminium housing and highly efficient electronics with LED system to offer long useful life even in adverse application and environmental conditions. The luminaire shall be with Co-extruded polycarbonate housing and mounded end caps. The system wattage shall be 36W with system lumens of 4400 lumens and system efficacy of > 120 lm/W. LED make: that satisfies IEC 62471 Photobiological/RoHS Standards with and LED Efficacy of > 150 lm/W, Colour Temperature-6500 K or Higher with LED binning as per ANSI Bin C78.377A, 120 Deg LED Beam Angle, CRI > 80, Life of LED as per L70 > 50000 burning hours, Ambient temp - 0 to 50 Deg C, Driver efficiency > 85%, THD < 10%, Power factor > 0.95, Inbuilt Surge protection in CM 4KV, Constant Current – Constant Voltage LED Driver with APFC Construction, high voltage cutoff & auto restart @ 320V, phase to phase 440V protection up to 8hrs, LED Driver Voltage range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. (For Battery Room etc.)

IN INR

IN USD

IN JPY

Pole Mounted Hybrid Solar Street lights (with all accessories)

Supply of all-in-one integrated LED hybrid solar streetlight consists of solar photovoltaic module, battery, battery management system, control electronics, LED driver, microwave sensor, Auto changeover switch, Inter-connecting cables and pole mounting piece integrated into the luminaire as a single unit. Solar streetlight with IP65 ingress protection having a system wattage of 60-70W with 8500 lumens (>140 lm/W) with 100Wp high efficiency monocrystalline solar panel, highly efficient MPPT based charge controller and 12.8 V, 42 Ah Lithium Ferro Phosphate (LiFePO4) battery with proper battery management system. LED lumen efficacy shall be at least 170 lm/W and LED driver should have > 90% efficiency. Typical correlated colour temperature should be 5700 K with CRI > 70. It should have microwave sensor-based movement detection and dim level adjustment to effectively extend the working time. AIO should be onsite configurable via a handheld remote. The luminaire should be housed in IK 08 impact resistance certified aluminium with polycarbonate lens cover. The luminaire shall have a specially designed adjustable pole mounting piece for optimal light distribution.

IN INR

IN USD

IN JPY

SITC of 48W LED Peripheral light Luminaire made of pressure diecast aluminium body with powder coated, having protective toughened glass, Supply Input voltage 120 – 270 V AC, P.F > 0.90, high power LED’s having efficacy > 120 lumines / watt, System efficacy > 95 lm/W and junction temperature < 70°C, with Ingress protection IP65, Driver surge protection 4KV, external Surge protection ≥ 5KV with optics distribution Type II medium, THD < 10% at 110 Volts AC, driver efficiency > 90%, CCT: 3000 K – 5700 K, minimum CRI > 70, etc., complete.

IN INR

IN USD

IN JPY

SITC of 32 Amps Receptacle on separate board with 32A TPN MCB etc. of approved make in suitable sheet enclosure, including earthing as per specification, including accessories all complete works.

IN INR

IN USD

IN JPY

SITC of LED Emergency Light fixture with 1 no. 1 feet (30 cm) single tube 9/11 W with M.F. SLA rechargeable battery with 3 hrs. of back up.

IN INR

IN USD

IN JPY

Fixing Charges of Fittings

Fixing all types & all capacities LED fittings Indoor on the wall / ceiling / rafters / gridders using 23 / 0.76" twin twisted PVC insulated wires.

IN INR

IN USD

IN JPY

Supply & fixing of 50 mm dia. FRP Pipe bracket up to 1.5 meters long for fixing LED street light fittings (peripheral) of all capacities on rail / RCC / Wall, using suitable clamps, bolts, nuts and wiring etc. complete. (Peripheral lights)

IN INR

IN USD

IN JPY

Supply & erection of FRP Tubular Pole 8 m free standing single arm bracket, continuously structured pole with FRP base plate of suitable size as per IS & IEC standards with specifications mentioned in the employer’s requirement. The pole should be Fiberglass Reinforced Plastic/ polymer.

IN INR

IN USD

IN JPY

SITC of Automatic Street Light Control Panel with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 1–0 - 280V AC, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 5 kW of single-phase load with necessary clamping arrangements.

IN INR

IN USD

IN JPY

SITC capacitor type 1200 mm high breeze ceiling fan with regulator (on switchboard) ceiling fan complete with down rod blades, shackle canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply, conforming to IS: 374-1979 and with double ball bearing system.

IN INR

IN USD

IN JPY

Supply, Delivery, Installation, Testing & Commissioning of Circuit & Point Wiring for Switchboard, lighting, fan circuits & sockets in complete.

Primary Point (Circuit Wiring from Indoor lighting LDBs to Switchboards & Power Sockets Circuit maximum 10 meters in length).

Circuit wiring for lighting panel/ distribution board to modular switch box with 4 sq.mm PVC insulated Cu conductor cable of approved make in surface or concealed rigid PVC conduit of suitable size, including paint etc. as required as per specification, including switch, ceiling rose, PVC flush box etc. all complete works.

IN INR

IN USD

IN JPY

Point wiring for 3 pin/ 5 pin 20Amps Socket outlet points on separate board 4 sq.mm PVC insulated Cu conductor cable, 20A switch etc. of approved make in suitable size of the PVC conduit including earth continuity conductor in surface or concealed wiring system as per specification, including switch and socket, all complete works.

IN INR

IN USD

IN JPY

Secondary Point (from primary tapping point to Light, fan and plug points)

Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable PVC conduit pipe for lighting with joint box and switch box with continuous earth connection by 14 SWG TC wire. (1 No.)

Run of 2 of 2.5 sq.mm PVC unsheathed copper SC cable in PVC conduit pipe for mains continuous earth connection by 14 SWG TC wire (3 Nos.)

Short point (not exceeding 3m)

IN INR

IN USD

IN JPY

Medium point above 3m and up to 6m

IN INR

IN USD

IN JPY

Long point above 6m and up to 10m

IN INR

IN USD

IN JPY

Plug, Sockets in Modular Enclosure without MCBs

6/10A Single Phase

IN INR

IN USD

IN JPY

20A Single Phase

IN INR

IN USD

IN JPY

Supply, Delivery, Installation, Testing & Commissioning of Earthing systems with necessary masonry works in complete.

Earth electrode for grounding of transformers & DG sets Neutral using copper Plate Earthing connected to 40 mm dia 3 meter long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of suitable size with a cast iron cover. The electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts as per IS:3043.

IN INR

IN USD

IN JPY

Earth Electrode for grounding of all Equipment and machines etc. using 40 mm dia 3 meter long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of suitable size and cast-iron cover. The electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. 25 kgs. of carbon-based environment friendly backfill compound and suitable clamp.

IN INR

IN USD

IN JPY

Supplying, Installation, Testing, Commissioning and running of GI and Copper strips earthing conductor for grounding connections, using necessary fixing materials as required, laying between earth pit and equipment.

50 x 6 mm Copper Flat (Transformer & DG Neutral)

IN INR

IN USD

IN JPY

50 x 10 mm GI (PCC, Aux Xmer, DG Set, Switchgears etc.)

IN INR

IN USD

IN JPY

50 x 6 mm GI (MCC Panels, Main Motors etc.)

IN INR

IN USD

IN JPY

25 x 6 mm GI (Cable Trays, LDBs, MLDB etc.)

IN INR

IN USD

IN JPY

25 x 3 mm GI (Valve DBs, Fan DBs, Street Lighting etc.)

IN INR

IN USD

IN JPY

Supplying, Installation, Testing, Commissioning and running of GI wire for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas, spacers etc.

8 SWG (Receptacles)

IN INR

IN USD

IN JPY

6 SWG (Small Motors)

IN INR

IN USD

IN JPY

Supply, Installation, Testing & Commissioning (SITC) of External Lightning Protection System with all accessories in complete.

IN INR

IN USD

IN JPY

SITC of Air Termination System: Aluminium alloy Solid Round Conductor of material AlMgSi used in air termination system. Cross sectional area of conductor should be min. 50 mm². Conductor is tested for Lightning Impulse current of 100 kA for 10/350 μs, Electrical, Resistivity, Tensile strength & Corrosion test as per IEC 62561-2. Parapet conductor holder for fixing on the Parapet wall for clamping 8 mm dia Aluminium alloy round conductor. Terrace conductor holder shall be considered in the flat surface. Folded clamps/ Metal roof holder considered for Metal sheets for clamping min. 8 mm dia Aluminium alloy round Conductor. Stainless steel cross connector for connecting minimum 8 mm aluminium conductor at cross/Tee junction. Expansion Piece with connector to compensate the expansion and contraction of Solid Round Al. conductor during temperature variations. Folded clamps consider to bond the metal parts. All the Lightning Protection components are tested as per IEC 62561-1&2.

IN INR

IN USD

IN JPY

SITC and run of min. 8mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in Down conductor system. Cross sectional area of conductor should be 50 mm². Conductor is tested for Lightning Impulse current of 100 kA for 10/350 μs, Electrical Resistivity, Tensile strength & Corrosion test as per IEC 62561-2. Parapet conductor holder for fixing on the Side wall for clamping 8 mm dia Aluminium alloy round Conductor in RCC building. Lightning counter is required in the building, and it will record number of lightning Strike in the building with date and time. All the Lightning Protection components are tested as per IEC 62561-1& 2.

IN INR

IN USD

IN JPY

SITC of Stainless-Steel Test Joint/ Link with enclosure to interconnect between min. 8 mm Al. round conductor to 10 mm copper bonded round conductor. used to disconnect the earth termination system to enable measurement of resistance. Test Parameter: Salt Spray Test for test joint plate -No sign of Corrosion Tested as per IEC 62561-1.

IN INR

IN USD

IN JPY

SITC of maintenance free Supply of non-corrosive 10 mm dia Copper bonded round conductor used for Earth termination in the soil and concrete and it is tested for short circuit test, Electrical resistivity, Tensile strength. Conductor holder is fixed on the Side wall of the building. All the Lightning Protection components are tested as per IEC 62561-1& 2.

IN INR

IN USD

IN JPY

Supply of UL listed Copper bonded rod of 254 microns coating thickness and 3.048 m length can be used as Earthing. The diameter of the rod shall be 14.2mm. Earth rod clamp of required size should be made up of stainless steel. Earth enhancement compound of 25 kg producing low resistance below 1 Ω m of an earth termination system. Material of the earthing enhancing compound shall be chemically inert to subsoil. It shall not pollute the environment. The compound shall be tested and certified as per IEC 62561-7. Earth Chamber Should have an outer dimension of 290 mm x 290 mm x 153 mm made of GFP material. Flush Mounted, removable and lockable cover of the earth pit should be able to withstand 60 kN. Lightning Protection components are tested as per IEC 62561-1 & 2.

IN INR

IN USD

IN JPY

Supply, Installation, Testing and commissioning of safety procedures for Electrical Equipments as per scope, specification and drawings for following items.

2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS.

IN INR

IN USD

IN JPY

Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

IN INR

IN USD

IN JPY

Hand Gloves 11KV Grade

IN INR

IN USD

IN JPY

First Aid Box complete with all First Aid Medicines.

IN INR

IN USD

IN JPY

Shock Treatment Chart fixed in glass frame

IN INR

IN USD

IN JPY

Danger Board as required by the Electrical Authorities. (Medium Voltage)

IN INR

IN USD

IN JPY

Danger Board as required by the Electrical Authorities. (High Voltage)

IN INR

IN USD

IN JPY

Teak Wood Ladder- 5 m Height

IN INR

IN USD

IN JPY

Earth Discharge Rod (3 Nos. RYB)

IN INR

IN USD

IN JPY

Earthing Truck for 11 kV VCB Panel (cable Side)

IN INR

IN USD

IN JPY

Earthing Truck for 11 kV VCB Panel (Bus Side)

IN INR

IN USD

IN JPY

Tools & Plant Machineries

Live Line Tester- Connector Screwdriver 901 Taparia Make or equivalent

IN INR

IN USD

IN JPY

Digital Multimeter CE Make or equivalent

IN INR

IN USD

IN JPY

Digital Tong Tester CE Make or equivalent

IN INR

IN USD

IN JPY

Electrical Air Blower

IN INR

IN USD

IN JPY

Digital Tachometer

IN INR

IN USD

IN JPY

Hand Crimpling Too ”8"

IN INR

IN USD

IN JPY

DE Spanner set 6 to 32 Jhalani Make or equivalent

IN INR

IN USD

IN JPY

Rings spanner set 6 to 32 Jhalani Make or equivalent

IN INR

IN USD

IN JPY

Hacksaw Frame with Blade

IN INR

IN USD

IN JPY

15” Screw Spanner Taparia Make or equivalent

IN INR

IN USD

IN JPY

Lever Type Grease Gun

IN INR

IN USD

IN JPY

200mm Cutting Plier Taparia Make or equivalent

IN INR

IN USD

IN JPY

200mm Screwdriver 825 Taparia Make or equivalent

IN INR

IN USD

IN JPY

300mm Screwdriver 829 Taparia Make or equivalent

IN INR

IN USD

IN JPY

800 gm Ball Pane Hammer with Handle Taparia Make

IN INR

IN USD

IN JPY

6” Chain wrench best India make or equivalent

IN INR

IN USD

IN JPY

8” Chain Wrench Best India Make or equivalent

IN INR

IN USD

IN JPY

Connector Screwdriver 901 Taparia Make

IN INR

IN USD

IN JPY

400mm Screwdriver 930 Taparia Make

IN INR

IN USD

IN JPY

12” Bearing Puller

IN INR

IN USD

IN JPY

12” Screw Spanner

IN INR

IN USD

IN JPY

Crowbar 5”

IN INR

IN USD

IN JPY

1” Cold Chisel

IN INR

IN USD

IN JPY

Pipe Wrench 24” Jhalani Make

IN INR

IN USD

IN JPY

Pipe Wrench 14” Jhalani Make

IN INR

IN USD

IN JPY

12” Flat rough File Scissors Make

IN INR

IN USD

IN JPY

12” Flat smooth File Scissors Make

IN INR

IN USD

IN JPY

12” Round File Rough Scissors

IN INR

IN USD

IN JPY

12” Round File Smooth Scissors Make

IN INR

IN USD

IN JPY

12” Half Round File Rough Scissors Make

IN INR

IN USD

IN JPY

12” Half Round File Smooth Scissors Make

IN INR

IN USD

IN JPY

Mechanical Equipment (Pump with piping and valves)

Supply, Installation, Testing and Commissioning of Single stage, Double Suction, Horizontal Split Case Centrifugal Pumps confirming to IS: 5120 and IS: 9137 Pumps of 4167 cum/hr. capacity at 77.80 M head including all losses, maximum 1000 RPM (syn) with corocoat coating inside the casing for increase pump life & efficiency, complete with all accessories such as Base frame, flexible Coupling, Mating flanges, AISI SS 316 Bolts, gaskets.

1. Shut off head: Min 120% of the specified head. 2.The pumps including working pumps and standby pumps shall be automatically operated in sequence such that no pump shall run continuously for longer duration. This shall be achieved through a control system.

3. The duty condition of the pump should be to the left of the best efficiency point and closer to best efficiency point.

4. Minimum guaranteed efficiency of horizontal split case pumps shall be 88% without negative tolerance.

5. The pump is required to work at an altitude of Mean Sea Level and at a maximum ambient temperature of 50 degree Centigrade.

6. Four working pumps in parallel combination should be able to deliver minimum of 400 MLD at the rated head.

7. Contractor to carry out sump model study & CFD analysis of pump.

Casing: SG Iron IS 1865 Gr. 500/7/GGG50 or 400/15/GGG40.

Impeller: Stainless Steel: ASTM A 743 CF8M Shaft: Stainless Steel: BS 970 Gr. 431 S29/ASTM A 276 Gr.431.

Casing Rings: Stainless Steel : ASTM A743 CA15 Impeller Ring: Stainless Steel : ASTM A743 CA15 Shaft Sleeve: Stainless Steel : ASTM A743 CA15 (Minimum hardness = 400 BHN) Mechanical Seal: Silicon Carbide v/s Silicon Carbide or Tungsten Carbide v/s Tungsten Carbide Note:1. Corocoat coating inside the casing to be provided for increase pump life & efficiency.

2. There shall be difference of 50 BHN hardness between Casing and Impeller rings.

Fasteners, Anchors bolts, Foundation Bolts etc. both in wet and dry areas: Stainless Steel: 316, - Base Plate: MS with epoxy coated. Bearing Life: One Lakh working hours (L10), Pump shall be Painted with Food Grade Epoxy inside and Outside the Pump casing and it should be 250 Microns, High quality corocoat or equivalent coating to be provided in casing an impeller for long term corrosion protection and efficiency improvements.

IN INR

IN USD

IN JPY

Supply, Installation, Testing, Commissioning of VFD Compatible, Horizontal Foot Mounted Squirrel Cage Induction motor minimum 1200 Kw, 1000 rpm (syn), Efficiency 95% (minimum), compatible for pumps of Sl no 2277 to 2291

Specific requirements for motors: Operating condition:

(i) Induction motor shall be TEFC/ CACA type suitable for continuous operation and operating on 3 Ph, 50 Hz. 11kV supply.

(ii) The motor is required to work at an altitude of 10 m above MSL and at a maximum ambient temperature of 50 degree centigrade.

IN INR

IN USD

IN JPY

Supply, Installation, lowering, laying & Jointing, testing, commissioning of Spirally/Longitudinal welded MS pipes (Fe-410 grade) conforming to IS 3589-2001, perfect linking, welding of joints and Flange Joints to correct position including cost and conveyance of pipes and materials with all lead and lifts, cost of all labour and giving satisfactory hydraulic test as per IS 3589 - 2001 for test pressure and working pressure both at factory and site etc., complete as per detailed specifications with Internal food grade epoxy coating 406 microns of approved make & External food grade epoxy coating 406 microns/Coal Tar Enamel Coating & Wrapping of 4 mm thick, including loading and unloading of pipes for the following diameters and specified thickness of plate as noted below, including bailing out of water wherever necessary. The Rates are including rubber insertion or any equivalent to the required specifications with MS Bolts and nuts for Flange Joints complete (Contractor will make his own arrangement for procuring water for testing).

1829 mm with 16 mm thk for flowmeter bypass arrangement

IN INR

IN USD

IN JPY

1829 mm with 16 mm thk on Common Delivery header

IN INR

IN USD

IN JPY

1829 mm with 16 mm thk on Inlet of GLR

IN INR

IN USD

IN JPY

1626 mm with 14 mm thk on Common Suction header

IN INR

IN USD

IN JPY

MS Blind flange for 1600 mm diameter pipe

IN INR

IN USD

IN JPY

Epoxy Coated MS Puddle Flange for 1800 mm diameter MS pipe

IN INR

IN USD

IN JPY

Epoxy Coated MS Puddle Flange for 1600 mm diameter MS pipe

IN INR

IN USD

IN JPY

Epoxy Coated MS Puddle Flange for 900 mm diameter MS pipe

IN INR

IN USD

IN JPY

914 mm with 10 mm thk on individual Suction side of each pump

IN INR

IN USD

IN JPY

813 mm with 18 mm thk on individual delivery side of each pump

IN INR

IN USD

IN JPY

323.9 mm with 7 mm thk on (Scour Valve)

IN INR

IN USD

IN JPY

323 mm with 7 mm thick for installing on Pressure Release Valve and Air Release Valve line at 1800 mm NB common header.

IN INR

IN USD

IN JPY

Supply, Installation, rolling, lowering, laying & Jointing, testing, commissioning of MS specials confirming to IS 1916/ 7322: 1985 with latest amendments.

IN INR

IN USD

IN JPY

Supply, Installation, Testing, Commissioning of Ductile Iron Electrically operated Long Body, Double Flanged, Double eccentric Resilient seated Butterfly valve confirming to BS EN 593/BS 5155/IS 13095 MOC: Body & Disc: DI IS 1865 Gr.500/7/GGG50/40, Shaft: Stainless Steel - ASTM A 276 Gr. 431, Seal Retaining Ring: Stainless Steel - ASTM A 743 CF8M, Body Seat Face: ASTM A 743 CF8M / Nickel welded with mating/companion flanges with suitable bypass SS piping & valve arrangement. inside food grade Epoxy powder coating, minimum 250 microns.

1800 mm PN 16 at Common Delivery Header

IN INR

IN USD

IN JPY

1600 mm PN 10 at Common Suction Header

IN INR

IN USD

IN JPY

1800 mm PN 16 for flowmeter bypass arrangement (Manual valve)

IN INR

IN USD

IN JPY

Supply, Installation, Testing, Commissioning of Ductile Iron, Rising spindle, electrically operated, metal seated, Sluice valves as per BS 5163-89/IS 14846-2000/DIN 3202 F4 or its latest amendment. Body, Bonnet & Wedge in Ductile Iron IS 1865 Gr.500/7/GGG50/GGG40, Body & Wedge Rings in Bronze/ SS304, Spindle in SS 431/420, Fasteners in SS316 with mating/companion flanges inside food grade Epoxy powder coating, minimum 250 microns.

900 mm PN 10 on Pump Suction Line

IN INR

IN USD

IN JPY

800 mm PN 16 on Pump Discharge Line

IN INR

IN USD

IN JPY

Supply, Installation, Testing, Commissioning of Ductile Iron, Rising spindle, metal seated, Sluice valves as per BS 5163-89/IS 14846-2000/DIN 3202 F4 or its latest amendment. Body, Bonnet & Wedge in Ductile Iron IS 1865 Gr.500/7/GGG50/GGG40, Body & Wedge Rings in Bronze/ SS304, Spindle in SS 431/420, Fasteners in SS316 with mating/companion flanges inside food grade Epoxy powder coating, minimum 250 microns.

300 mm PN 16 on Common header for Scour valve arrangement

IN INR

IN USD

IN JPY

200 mm PN 16 on Common header for Pressure relief valve isolation arrangement

IN INR

IN USD

IN JPY

300 mm PN 16 for Bypass of 1800 mm Butterfly Valve on Common Discharge Header

IN INR

IN USD

IN JPY

300 mm PN 16 for Bypass of Butterfly Valve on 1600 mm Common Suction Header

IN INR

IN USD

IN JPY

200 mm PN 16 on Common header for Kinetic Air relief valve isolation arrangement

IN INR

IN USD

IN JPY

100 mm PN 16 manual sluice valves for Bypass of 900 mm on individual pump suction line

IN INR

IN USD

IN JPY

80 mm PN 16 manual sluice valves for Bypass of each 800 mm discharge line sluice valve

IN INR

IN USD

IN JPY

Supply, installation, testing & Commissioning of Ductile Iron Double flanged Dual plate check valve conforming to API 594 with latest amendments as detailed below of following diameters and types and conveying to work site, loading, unloading, stacking etc. complete with all lead and lift with inside food grade Epoxy powder coating, minimum 250 microns.

1800 mm PN 16 on Common Delivery Header

IN INR

IN USD

IN JPY

Supply, Installation, testing & Commissioning of Ductile Iron D/F Tilting disc Swing Check Valves Slanted seated with maximum swing. Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7, Shaft of stainless steel - SS: 316, Shaft bearing of zinc free bronze, Body Seat Face & Disc Face with SS304/ Integral nickel-chromium overlay welding and micro finished with mating/companion flanges with inside food grade Epoxy powder coating, minimum 250 microns.

800 mm PN 16 on Individual Pump delivery line

IN INR

IN USD

IN JPY

Supply, installation, testing & Commissioning of SS 304 Expansion Bellows of Flange Ends with necessary mating flanges, bolts & Gaskets for Dismantling purpose with inside food grade Epoxy powder coating, minimum 250 microns.

1800 mm PN 16 at Common Delivery Header

IN INR

IN USD

IN JPY

1800 mm PN 16 for flowmeter bypass arrangement

IN INR

IN USD

IN JPY

1600 mm PN 10 at Common Suction Header

IN INR

IN USD

IN JPY

900 mm PN 10 on individual Suction side of each pump

IN INR

IN USD

IN JPY

800 mm PN 16 on individual Discharge side of each pump

IN INR

IN USD

IN JPY

Supply, installation, testing & Commissioning of Surge anticipating Relief valves against power failure surges or pressure waves caused by velocity changes, quick opening relief easily adjustable pressure setting with mating/companion flanges with inside food grade Epoxy powder coating, minimum 250 microns.

200 mm PN 16 on Common header for Surge Protection air cushion valve.

IN INR

IN USD

IN JPY

Supply, installation, testing & Commissioning of Tamper proof DI single chamber air release valves with pressure range from PN 1.0 to 2.5 with body and cover made of Ductile Iron of Grade GGG 40 or equivalent grade conforming to IS 1865 with Food Grade Epoxy Powder coating (EP-P) inside and for outside of colour blue RAL 5005.

200 mm PN 16 both on Common header for Air release valve arrangement.

IN INR

IN USD

IN JPY

Supply, installation, testing & Commissioning of MS fabricated supports & chequered plates for pipeline, Ladder & platforms for valve and pump operation & maintenance and other Equipments.

IN INR

IN USD

IN JPY

Air Conditioning & Ventilation system

Supply, Installation, testing & Commissioning of Heavy-Duty Ventilation Fans with bracket blades and Bird cowl arrangement Group "A" Required dia and sweep with 1440 RPM 415V or 230V, 50Hz, AC supply to provide suitable Air changes per hour for different Areas.

Heavy Duty Ventilation Fan 1.5 kW

IN INR

IN USD

IN JPY

Heavy Duty Ventilation Fan 0.75 kW

IN INR

IN USD

IN JPY

Heavy Duty Ventilation Fan 0.37 kW

IN INR

IN USD

IN JPY

Heavy Duty Ventilation Fan 0.25 kW

IN INR

IN USD

IN JPY

Heavy Duty Ventilation Fan 0.12 kW

IN INR

IN USD

IN JPY

Supply, installation, testing & Commissioning of Split Air Conditioner (1.5 Ton BEE 5- Star Rating Inverter type) (2W+1S)

IN INR

IN USD

IN JPY

Energy Efficient Air Conditioning System for cooling of VFD panels minimum capacity 80 TR (Central AC / Chiller / Package / VRF) with ducting and all accessories.

IN INR

IN USD

IN JPY

EOT CRANE

Supply, installation, testing & Commissioning of 15.0 T capacity Double Girder type fully electrically operated EOT crane suitable for handling pumps, motors, valves, pipes etc. with electrically operated hoist class II duty geared travelling trolley with min long travel 52 meter, span 10 meter, lift 10 meter complete with long travel rail track (40 mm sq. bar) moving or cross girder, all three motions electrically operated by suitable rating motor IP 54, control panel & down pendant control block, brake, safety device, cable from motor to starter panel & other required accessories & tested to 50% overload etc. comp. as per site requirement.

IN INR

IN USD

IN JPY

Dewatering System & Sump drainage arrangement

Supply, installation, testing & Commissioning of submersible centrifugal sewage non-clog pumps, vertical spindle type pump, wear resistance with submersible motor for the various duty conditions as stated in the annexure. Pump shall be capable of handling min 100 mm solid size with sewage specific gravity of up to 1.05.

Discharge Up to 20 m3/hour @ 15 m head

IN INR

IN USD

IN JPY

Supply, Installation, Testing, Commissioning of Ductile Iron, Rising spindle, metal seated, Sluice valves as per BS 5163-89/IS 14846-2000/DIN 3202 F4 or its latest amendment. Body, Bonnet & Wedge in Ductile Iron IS 1865 Gr.500/7/GGG50/GGG40, Body & Wedge Rings in Bronze/ SS304, Spindle in SS 431/420, Fasteners in SS316 with mating/companion flanges.

100 mm dia for delivery Isolation Valve PN 10 (Individual Delivery Side of pumps and Common header of Pumps)

IN INR

IN USD

IN JPY

Supply, Installation, Testing, Commissioning of Ductile Iron, D/F Slanted seat Swing Check Valve. Body of ductile cast iron of Grade GGG-40 or equivalent grade and disc of ductile cast iron GGG-40 or equivalent grade with mating/companion flanges.

100 mm dia for delivery Isolation Valve PN 10 (Individual Delivery Side of pumps)

IN INR

IN USD

IN JPY

Supplying, of 100 mm PN 10 of DI flanged pipe confirming to IS 8329:2000 with latest amendments with Cement Mortar Lining (CML) with Portland Slag Cement as per IS 455:1989 and Metallic Zinc Coating.

IN INR

IN USD

IN JPY

Supply, Installation, Testing, Commissioning and fixing of DI specials with ISI mark confirming to IS 9523 / 2000 suitable for jointing 100mm to 600 mm dia. DI pipe coated with rust prevention coatings of DI K12 Fittings & Dismantling joints (Note: In respect of flanged and spigot, flanged and socketed type specials, the rate applicable for flanged type specials is allowed.)

100mm - 200 mm dia.

IN INR