8123/SAR-24/2023-24

Amount

Cleaning of Sewage line of 100mm bore from gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley, all as specified & directed.

All as per description of serial item No.1.00 here-in-before but sewage line of 150 mm bore and depth of sewage line upto 2m.

All as per description of serial item No. 1.00 here-in-before but sewage line of 200 mm bore and depth of sewage line upto 3m

Cleaning of septic tank of any capacity or description including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the Govt land, complete, all as directed.

M&L dewatering of soak well by pumping or any suitable means dia of soak well exceeding 2.50 m and n. exc 3.00 and depth not exc 3.00 complete all as directed.

Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required and directed by Engr-in-charge.

All as per description of serial item No. 6.00 here-in-before but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed.

M&L for Brickwork with subclass ‘B’ bricks, (OLD SIZE BRICKS) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

All as in item 09, but except bricks

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, laid dry and removal complete all as specified & directed.

M&L for brick flooring at any location laid flates bedding and grouting in cement mortar 1:3 and pointed in cement mortar 1:3 using Ist class burnt brick (Best quality) complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm gradded stone agg )as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, drain channels, copings,parapets copings, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified. Note : - Supply only water proofing admixture shall be measured and paid for separately.

M&L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surfaces other than fair face of brick work of walls, mixed with water proofing admixture (ISI marked) finished even & smooth without using extra cement complete all as specified. Note : - Supply only water proofing admixture shall be measured and paid for separately.

Supply only integral liquid water proofing compound (ISI marked). Make : Pidilite (Dr. Fixit Pidiproof LW) or equivalent of Fosroc / Sika / STP

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified & directed by Engr-in-Charge.

Demolition of reinforced cement concrete as in cover/slab of drain/culvert/septic tank/soakage well all a specified & directed by Engineer-in-Charge.

M&L for precast RCC 1:2:4 type C1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately.

Providing and laying 75mm thick for precast SFRC drain cover without frame but including complete sides iron sheets (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton /Sqm in square or rectangular shape complete all as specified and directed by Engr-in-Charge.

Providing and laying 50mm thick for precast SFRC drain cover without frame but including complete sides iron sheets (medium ) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 2 to 3 ton /Sqm in square or rectangular shape complete all as specified and directed by Engr-in-Charge.

M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to TMT bar complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up drain pipes 150 mm dia (salt glazed ware AC or reinforcement concrete set in cement mortar.

M&L 150 mm Salt glazed stonware pipe laid and jointed complete with collars

M&L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

All as per item No 30 above exc 1.5 m deep and n.exc 3 m deep.

M & L cement conc. 1:4:8 type D2 (40 mm graded aggregate) as in foundation, filling and mass conc complete all as specified.

Returning filling in incl spreading levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified& directed by Engr-in-Charge.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above or below the starting point complete all as specified& directed by Engr-in-Charge.

M&L for 150mm dia Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engr-in-Charge.

Dismantling of old PVC (SWR)/CI pipes any type & any size complete all as specified

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including dismantling old u/s pipe complete all as specified

S&F Sand cast,100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors and including dismentling old u/s pipes complete

S&F Sand cast,100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in wall and including dismentling old u/s pipes complete

S&F Sand cast,75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors and including dismentling old u/s pipes complete

S&F Sand cast,75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in wall and including dismentling old u/s pipes complete

S&F in repair CI Bends 100 mm dia (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified

S&F in repair CI Bends 75 mm dia (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified

S&F 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified

S&F 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified

S&F in repair 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, type `P' all as directed and specifed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground

Excavation in post holes each not exc 0.5 cum, getting out soft/loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as directed by Engineer-in-charge and all as specified.

Dismantling structural steel work including door /gate , frame ,trusses compete all as specified

M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces.

Dismantling of fencing wire mesh,any type compete all as specified

Supply only Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire.

Demolition of cement concrete (un-renforced) in ground floor and paving. exc. 15 cm thickness (below or above ground level.) & removal of rubbish material complete all as directed by Engineer-in-charge and all as specified.

M&L for 100 mm thick PCC 1:4:8 type D -2 using 40 mm graded aggregate as in sub base complete all as specified& directed by Engr-in-Charge.

Providing and laying prepolished cement concrete Chequered tiles 30cmx30cmx25mm thick, with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape heavy duty , set,jointed and pointed in neat cement slurry in floors over screed bed 15mm thick 1:6 cement mortar complete all as specified & directed by Engr-in-Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified. Note : The rate quoted by tenderer is deemed to included in item for painting any type of Bldgs for married/OTM accn , stores, all type fencing/Gates/concertina Coil angle including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M&L preparation of old painted wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint all as specified. Note : The rate quoted by tenderer is deemed to included in item for painting any type of Bldgs for married/OTM accn , stores, all type fencing/Gates/concertina Coil angle including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M&L for preparation of old/newly painted RCC Post and cement surfaces of any description over 10 cm in width or girth and applying one coat of external emulsion paint in Camouflague pattern or plain or pattern as decided by Engr-in-Charge. Note : The rate quoted by tenderer is deemed to included in item for painting any type of Bldgs for married/OTM accn , stores, all type fencing/Gates including any height and width at stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M&L preparation old/newly painted RCC Post and cement surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint all as specified. Note : The rate quoted by tenderer is deemed to included in item for painting any type of Bldgs for married/OTM accn , stores, all type fencing/Gates/concertina Coil angle including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M&L preparation of old PAINTING BRICK, STONE, CONCRETE, ASBESTOS CEMENT SHEET OR PLASTER SURFACES Surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of wheather proof Exterior Emulsion Paint (exterior grade) all as specified. Note : The rate quoted by tenderer is deemed to included in item for painting any type of Bldgs for married/OTM accn , stores, all type fencing/Gates including any height and width shall be made good by contractor without any extra cost to the Govt.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290).

S&F mild steel round bars as in tie bars of 10 mm dia and over, fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed. Note: Cost of cutting to length, bent to shape rquired & binding with MS wire is included in above rate.

S&F for Mild steel screw bolts dia of Neck 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long compleete all as directed by Engr-in-charge.

M&L Compound girders and stachions, lattice giders, aerial masts, stair,gate,frame work , staging for water tanks and the like including caps, bases, splices etc channel sections or angles with plates, including all lattice bars, stiffeners, gussets plates, etc.Fe- 290 (Gde E-165) quality 'A' compleete all as directed by Engr-in-charge.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section confirming to Fe-410-S with gusset plate , rails braces etc. complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or slinding with and including either hooks hinges and rollers for slinding gates, guide rail of MS flat and framing required for fixing of rollers, pintle hinges, locking arrangement as required and hanging also fastening and fixing complete using Fe- 290 (Gde E-165) quality 'A' compleete all as directed by Engr-in-charge.

Restraining & resecuring the old chain link fencing including making good stable etc

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Restraining & resecuring the old Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed including making good stable etc

S&F in repair Punched tape concertina coil any dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate), as in sub base all as directed by Engineer-in-charge.

M&L Vetrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick cement screeding in CM 1:6 Complete all as specified and directed by Engr-in-Charge.

M&L Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick coloured (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engr-in-Charge.

M&L non skid ceramic tiles colored 300x300x7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engr-in-Charge.

M&L machine cut kota stone slab flooring 20-25mm thick and area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed 15mm thick 1:6 cement mortar complete all as specified & directed by Engr-in-Charge.

M&L Vetrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles n exceeding 0.36, in vertical surfaces as skirting and dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10mm thick rendering in CM 1:4 Complete all as specified and directed by Engr-in-Charge.

M&L coloured glazed tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces as dados and skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified& directed by Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; , Rough finished surfaces of concretec flat complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge. Note :- Reinforcement shall be measured and paid for separately.

M& L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately).

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Dismantling water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified & directed by Engr-in-Charge.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

Dismantling water tanks of capacity exc 5000ltr but not exc 1000ltr and removing from site complete all as specified & directed by Engr-in-Charge.

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

Dismantling water tanks of capacity exc 1000ltr but not exc 2000ltr and removing from site complete all as specified & directed by Engr-in-Charge.

Supply and fixing 2000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

BRIJ CONSTRUCTIONS

SUBHASH CHAND CONTRACTOR

PANWAR CONSTRUCTIONS